PH & PHW Parts

A genuine Petter centre main bearing sets for PH and PJ Diesel engines. Equivalent to Petter part number 392994 STD.

A genuine Petter main bearing gear end for PH and PJ Diesel engines. Equivalent to Petter part number 264904 STD.

Genuine Petter, Lucas, Bryce or OEM Equivalent fuel injector nozzle suitable for single and twin cylinder Petter AV, AVA, PH & PHW range of diesel engines. The HL130S26C175P3 nozzle is equivalent to Petter part number 250437.

Later type aftermarket cartridge fuel filter being a suitable replacement for the assembly found on many Lister Petter engines. This standard AD600 type filter comes complete fitted with the ACD60 paper element P/N 201-13118. Suitable for Lister LD, SL, LR, SR, ST1, ST2, LPA, LPW, LPWS, VA and Later CS 8-1 & 16-2 engines. Also found on many Petter engines.

A new cast iron crank handle to suit 1.5” crank shafts, equivalent to Petter 193374, 193798, JL1 or JL1A. This high quality non-genuine crank handle comes with an easily reversable ratchet pawl to suit both clockwise and counter clockwise engines.

Genuine new old stock Petter PH1 & PH2 lubricating oil pump strainer, part number 194526.  

Genuine new old stock Petter PH1 & PH2 lubricating oil pump assembly complete with 31 tooth gear, part number 340779. Will also fit later AV & AVA engines with rotary type oil pump.

Genuine Lister Petter air filter element 289185, fits Lister Petter PH, PHW and late PJ1, PJ2, PJ1W, PJ2W with dry type air filters. Please refer to the dimensions listed below as a guide to whether this filter element is suitable for your engine.

Genuine new old stock Petter PH2 crankshaft complete with 37 tooth gearwheel for oil pump. Lister Petter part number 393160, suitable for 2 cylinder engines after engine number 2898.

Genuine push rod rubber seal for both top and bottom of push rod tubes on all air cooled Petter PJ & PH diesel engines, part number 208493, also replaces 367850.

Sold Individually.

Genuine Petter exhaust silencer suitable for PH1, PHW1, AV1, AVA1 and possibly others that will except a 1” BSP male threaded muffler. These are new old stock, they show some signs of long term storage. Petter part number 294158 (JF26).

Genuine Bosch 021 fuel injection pump suitable for Indian built Petter clone engines made by various companies including Kirloskar, known to fit cloned AV, AVA, PH, PHW, TV1, TV2 & DM20 engines in both single and multi-cylinder. Bosch part number 9 410 031 021.

These pumps are not suitable for British built engines without modification.

New genuine Bosch fuel injector suitable for Petter PH type Kirloskar engines, including AV-1, TV-1, TV-2, TAF and possibly others. The assembly comes complete with holder 9430031258 593 337, nozzle DLLA 110 S 639 and copper sealing washer.

These injectors may not be suitable for British built engines without modification.

Bottom end (“Conversion”) gasket set suitable for Petter PH1, PH2, PHW1, PHW1, AVA1 & AVA2. This high quality gasket set is equivalent to Petter part number 334273 (Reference HJZ3)

Genuine copper head gasket suitable for Petter PH1 PH2, AVA1 & AVA2 air cooled diesel engines. Part number 252670, reference numbers AJB58A, PET-252670.

Decarbonising set (top end/decoke) gasket set suitable for the Petter PH1, PH2, AVA1 & AVA2 air cooled diesel engines. This high quality non-genuine set is equivalent to Petter part number 359503 (Reference AJZ2 & AJZ2B). Supersedes 336418.

Sold Per Cylinder (Example: For PH2 & AVA2 order 2 sets).

Genuine piston assembly to suit Petter PH & PHW engines with 0.020” oversize bore, equivalent to Petter part number 364621 (REF No: HJC10b), supersedes and replaces 330385, 336608, 358088, HJC10+20.

New high quality non-Genuine piston assembly to suit Petter PH & PHW engines with 0.040” oversize bore, equivalent to Petter part number 364623 (REF No: HJC10d), supersedes and replaces 330386, 336609, 358089, HJC10+40.

New high quality non-Genuine piston assembly to suit Petter PH & PHW engines with 0.020” oversize bore, equivalent to Petter part number 364621 (REF No: HJC10b), supersedes and replaces 330385, 336608, 358088, HJC10+20.

New high quality non-Genuine piston assembly to suit Petter PH & PHW engines with a standard bore, equivalent to Petter part number 364619 (REF No: HJC10), supersedes and replaces 330384, 336607, 355803.

Oil filter element, Ryco or similar, equivalent to Petter part number 250657 (JK81/6), suitable for Petter PH2, PHW2, *PJ, *PJW (*JK81/6 Not PJ1, PJ1W), please check dimensions before ordering.

Rubber bellows used on Petter PH, PHW, PJ, PJW, PAZ & later AV, AVA Series 2 engines. Equivalent to part numbers 1/152, 1-152, 367900, JA199, 256188, P367900, 02439. Also replaces AAD159 & 3/256188, 2566188 governor plunger cover/bellows used on Petter AA1, AB1, AC1 & AC2 engines.

Sold Individually.

Fuel pump control rod bush used on Petter PH, PHW, PJ, PJW, PAZ & AV, AVA engines. Equivalent to part numbers 1/151, 1-151, 95272.

Sold Individually.

New Petter Fuel pump control rod used on Petter PH, PHW, PJ, PJW, PAZ & AV, AVA engines. Equivalent to part numbers 1/153, 1-153, 95266. Note: Not suitable for all fuel pumps in the engine ranges mentioned, please contact us if you are not sure.

Replacement push rod for Petter PH, PHW, AV & AVA engines, equivalent to Petter part number 250765, replaces 2/250765 & 368040.

Genuine Lister Petter PH & PHW piston ring set (STD), part number 364789, replaces ZPC 113, HJC113.

Genuine Lister Petter PH & PHW piston ring set (0.020" Oversize), part number 364790, replaces ZPC 113B, HJC113b.

Genuine Lister Petter PH & PHW piston ring set (0.040" Oversize), part number 364791, replaces ZPC 113D, HJC113d & 53636.

Genuine Petter restrictor assembly, part number 347731. Used on PAZ1, JP & PH engines.  

Genuine Petter PH, PHW, PJ, PJW, AV, AVA brass governor weight set (1 x Pair), suitable for fixed speed and variable speed controlled engines, part number 254671, replaces MJD40. Not suitable for all builds, please check your engines parts list for reference before purchasing.

Genuine Petter PH, PHW, PJ, PJW, AV, AVA brass governor weight set (1 x Pair), part number 204858, replaces 4/204858, JD4. Not suitable for all builds, please check your engines parts list for reference before purchasing.

Genuine Lister Petter AV2 & PH2 bottom radiator hose, part number 251001, replaces JF11 & PET-251001.  

Genuine Lister Petter fuel tank cap suitable for tanks fitted to later AA1, AB1, AC1, AC1W, PJ & PH engines. Not suitable for all tank, please check suitability before ordering.

Genuine piston assembly to suit Petter PH & PHW engines with 0.040" oversize bore, equivalent to Petter part number 364623 (REF No: HJC10d), supersedes and replaces 330386, 336609, 358089, HJC10+40.

Genuine piston assembly to suit Petter PH & PHW engines with standard size bore, equivalent to Petter part number 364619 (REF No: HJC10), supersedes and replaces 330384, 336607, 355803.

Genuine Petter PJ, PJW, PH & PHW crankshaft thrust washer, part number 257762 (HJC 23), replaced by 367810.

Genuine Petter  PH, PHW, PJ1, PJ2, PJW1 & JPW2 oil pump, early type with 30 tooth gear, part number 390203 (reference JK39 Early type), replaces 93671/1.

Genuine Petter PJ & PH push rod housing joint, part number 336400 (Reference CB 89).

Genuine Lister Petter PHW1 & PHW2 head gasket, suitable for early engines with cylinder bore holes diameter of 100mm (3.9in), part umber 269116 (Reference WJB58 Early type).

Genuine Petter valve spring (Inner & Outer), part number 390144, (Reference: JB56/57 Spring set). Early type comprising: 1 off 204897 spring inner, 1 off 204898 spring outer. PH only: Up to 2000 r/min only silver/orange.

1 Set required per valve.

Genuine Lister Petter PH1 & PH2 gear cover plate joint, part number 272353.

Genuine Lister Petter PH1, PH2 & Series 2 AV1 & AV2 rocker cover plate joint, part number 250502 (Reference JB4)

Petter PJ and PH fuel injector washer for early head (Was Not Used on Later Heads), part number 252426.

Fuel lift pump complete with gasket for Petter PH1 & PH2 engines. The BCD2609/1, PN6130 pump is equivalent to Petter part number 361451, replaces 296189. Note: Will also fit some Petter PJ & PJW where the JE88 fuel feed pump bracket has been fitted, please check with us before purchasing if you are unsure.