Ronaldson & Tippett CF 4HP & 5HP Piston Ring Set - 4-1/8” Bore (STD)

        Ronaldson & Tippett CF 4HP & 5HP Piston Ring Set - 4-1/8” Bore (STD)

        High quality piston ring set for the Ronaldson & Tippett CF 4HP & 5HP engines, these diesel engines are commonly referred to as the R&T hammerhead. This ring set consists of 3 x 3/16 wide compression rings and 2 x 3/16 wide oil scraper ring to suit a standard 4.125” bore.

        Please check your engines bore before ordering, this ring set is not suitable for 6HP to 8HP engines.

        Not rated yet
        0
        • $79.20
        • including GST
         
        In stock(5 items available)

        The Ronaldson & Tippett CF Type was rebranded and sold under many other distributer and company names, including but not limited to the following: Cooper, and others.

        Compression Ring Dimensions:

        • Bore Size 4.125” (104.77mm)
        • Axial Width 3/16” (4.762mm)
        • 3 Per Set


        Oil Scraper Ring Dimensions:

        • Bore Size 4.125” (104.77mm)
        • Axial Width 3/16” (4.762mm)
        • 2 Per Set.


        *Radial wall thickness shown is an indication only, this may vary by up to 0.005” depending on stock available at the time. If you require a specific radial thickness, please contact us to discuss your requirements.

        CHECK YOUR PISTON & BORE! Remember, many of these engines can be as much as 80 to 100 years old or more, piston ring groves may be worn or may have even been modified in the past. Be sure to check your engines piston and bore for ring suitability before purchasing.

        Gap Check Your New Rings: All new rings should to be checked for correct minimum end gap requirement suitable for your engines bore, refer to your workshop manual for original manufactures specifications on correct ring end gap required for your engine. In the absence of the original manufacturer’s specifications please refer to the general information pamphlet that is provided with your new piston rings.

        We purchase our new piston rings from several suppliers here in Australia and around the world, as well as purchasing new old stock from closing businesses. Some of our rings are pre gapped, some are not, if you have specific requirements for pre-gapped or ungapped rings please contact us.

        Fitting Piston Rings: Using ring expanders is highly recommended to avoid breaking your new rings or causing damage to the piston, please be sure to read the tips and recommendations on the pamphlet provided with your new piston rings.

        Quality Guaranteed: Our piston rings have been tried and tested and are constantly quality checked, you can rest assured you are buying a high quality product from O.T.E. Parts Australia.

          • SKU
            CF289-CF290
          • Weight
            0.1900 kg
        • Manufacturer
          O.T.E. Parts Australia

        Product questions

        No questions yet. Be the first to ask the question!

        Customers who viewed this product also bought

        Footer navigation