Lister A & B Junior

    • New!

          Lister A Piston Ring Set to Suit 3.75” Bore (Early) - 3 Ring

          New high quality piston ring set to suit the early Lister A Junior engines with a standard 3.75” bore. This is a 3 compression ring set, please check your piston before ordering. All 3 rings in this set have a 7/32” Axial Width.

          0.0
          Add first review
          Not rated yet
          • $44.00
          • including GST
          Sorry, we only have 5 of that item available
          • New!

                Lister A Piston Ring Set to Suit 3.75” Bore (Early) - 4 Ring

                New high quality piston ring set to suit the early Lister A Junior engines with a standard 3.75” bore. This 3 x compression ring plus 1 x oil ring set was used on engines up to Spec A22 & A62, please check your piston before ordering. All 4 rings in this set have a 7/32” Axial Width.

                0.0
                Add first review
                Not rated yet
                • $59.95
                • including GST
                Sorry, we only have 5 of that item available
                • New!

                      Lister Junior A, AK, B & BK Fuel Pump Spring A452

                      Lister Junior A, AK, B & BK replacement fuel pump springs equivalent to Lister part number 002-00452 or A452. These springs are made for the later A449 fuel pumps with an external spring under the dust cap, they will not fit the early A214 pumps that had an internal spring under the plunger.

                      0.0
                      Add first review
                      Not rated yet
                      • $7.70
                      • including GST
                      Sorry, we only have 996 of that item available
                      • New!

                            Lister J, K, L, M & B Valve Spring Carrier 3383

                            Valve spring carrier suitable for Lister J, K, L, M petrol/paraffin engine and the Lister B & BK junior engines. This replacement spring holder is equivalent to Lister part numbers 3383 & J57, suitable for 7/16” (11mm approx.) valve stems.

                            Sold Individually.

                            0.0
                            Add first review
                            Not rated yet
                            • $15.40
                            • including GST
                            Sorry, we only have 18 of that item available
                            • New!

                                  Camshaft End Cover Bush for Lister A & B Junior A247

                                  A replacement bronze camshaft end cover bush suitable for both A & B Type Lister Junior’s, used on twin flywheel versions only. This high quality non genuine part is equivalent to Lister part number A247. Note: You will need to drill the oil lubrication hole after press fitting the bush.

                                  0.0
                                  Add first review
                                  Not rated yet
                                  • $22.00
                                  • including GST
                                  Sorry, we only have 43 of that item available
                                  • New!

                                        Lister A, B Junior & H Crankcase Door Gasket H87

                                        Lister A, AK & B, BK Juniors & H crankcase door gasket, equivalent to Lister part number H87.

                                        0.0
                                        Add first review
                                        Not rated yet
                                        • $6.60
                                        • including GST
                                        Sorry, we only have 60 of that item available
                                        • New!

                                              Lister A & B Junior & H Fuel & Oil Pump Valve Ball (Each)

                                              Precision made brass 1/4” ball suitable for replacing the often worn or corroded valve balls in vintage Lister A, AK, B & BK Junior fuel pumps and Lister H fuel and oil pumps, equivalent to Lister part number H119.

                                              Sold Individually

                                              0.0
                                              Add first review
                                              Not rated yet
                                              • $3.30
                                              • including GST
                                              Sorry, we only have 82 of that item available
                                              • New!

                                                    Lister A & B Junior Gib Key Cover A263

                                                    Australia made reproduction Gib key cover for the Lister A, AK & B, BK Junior. Only suitable for flywheels with a hub diameter of approximately 75mm to 76mm, please check suitability before purchasing.

                                                    Sold Individually

                                                    0.0
                                                    Add first review
                                                    Not rated yet
                                                    • $44.00
                                                    • including GST
                                                    Sorry, we only have 12 of that item available
                                                    • New!

                                                          Lister D, DK, A, AK, B, BK, CD & CE Governor Spring - Slow Speed

                                                          A new high quality reproduction governor spring suitable for low speed Lister D, DK, A, AK, B & BK petrol & petrol/kerosine engines and CD & CE diesel engines. See suitable speed ranges below.

                                                          0.0
                                                          Add first review
                                                          Not rated yet
                                                          • $8.80
                                                          • including GST
                                                          Sorry, we only have 8 of that item available
                                                              • Lister D, DK, A, AK, B, BK, CD & CE Governor Spring - High Speed

                                                                A new high quality reproduction governor spring suitable for high speed Lister D, DK, A, AK, B & BK petrol & petrol/kerosine engines and CD & CE diesel engines. See suitable speed ranges below. Equivalent to Lister Part Number: J127

                                                                0.0
                                                                Add first review
                                                                Not rated yet
                                                                • $7.70
                                                                • including GST
                                                                Sorry, we only have 35 of that item available
                                                                    • Champion D16 Spark Plug

                                                                      Brand new D16 spark plug, suits many vintage stationary engines including Lister A & B Junior, Lister H, J, K, L, M, N, P, R & Q, Ronaldson & Tippett N Type, Moffat-Virtue V3 and many others.

                                                                      0.0
                                                                      Add first review
                                                                      Not rated yet
                                                                      • $12.65
                                                                      • including GST
                                                                      Sorry, we only have 20 of that item available
                                                                      • New!

                                                                            Spark Plug Lead Spade Terminal for 7mm HT Cable (Solder Connection)

                                                                            Brass spade type spark plug lead terminal for connecting HT lead end to standard type spark plugs with a terminal nut for fixing the cable securely.

                                                                            Sold Individually

                                                                            0.0
                                                                            Add first review
                                                                            Not rated yet
                                                                            • $5.50
                                                                            • including GST
                                                                            Sorry, we only have 80 of that item available
                                                                            • New!

                                                                                  7mm HT Ignition Lead Black PVC (Per Meter)

                                                                                  Copper core 7mm HT ignition lead, sold per meter. Taken from 100 meter roll, if you require more than one meter simply add more to your cart and it will be sent as one continuous length where possible.

                                                                                  Sold Per Meter.

                                                                                  0.0
                                                                                  Add first review
                                                                                  Not rated yet
                                                                                  • $8.80
                                                                                  • including GST
                                                                                  Sorry, we only have 151 of that item available
                                                                                  • New!

                                                                                        7mm Cotton Braided HT Ignition Lead - Black

                                                                                        Premium quality cotton braided HT ignition cable, 7mm OD with a 1.5mm2 multi strand copper core. Plain black fire retarded cotton cloth braiding covers the PVC insulated core. This high quality product is made in the UK.

                                                                                        Sold Per Meter.

                                                                                        0.0
                                                                                        Add first review
                                                                                        Not rated yet
                                                                                        • $16.50
                                                                                        • including GST
                                                                                        Sorry, we only have 12 of that item available
                                                                                        • New!

                                                                                              7mm Cotton Braided HT Ignition Lead - Red/Yellow

                                                                                              Premium quality cotton braided HT ignition cable, 7mm OD with a 1.5mm2 multi strand copper core. Red with yellow flecks, the fire retarded cotton cloth braiding covers the PVC insulated core. This high quality product is made in the UK.

                                                                                              Sold Per Meter.

                                                                                              0.0
                                                                                              Add first review
                                                                                              Not rated yet
                                                                                              • $16.50
                                                                                              • including GST
                                                                                              Sorry, we only have 15 of that item available
                                                                                              • New!

                                                                                                    7mm Cotton Braided HT Ignition Lead - Yellow/Black

                                                                                                    Premium quality cotton braided HT ignition cable, 7mm OD with a 1.5mm2 multi strand copper core. Yellow with black flecks, the fire retarded cotton cloth braiding covers the PVC insulated core. This high quality product is made in the UK.

                                                                                                    Sold Per Meter.

                                                                                                    0.0
                                                                                                    Add first review
                                                                                                    Not rated yet
                                                                                                    • $16.50
                                                                                                    • including GST
                                                                                                    Sorry, we only have 48 of that item available
                                                                                                    • New!

                                                                                                          7mm Cotton Braided HT Ignition Lead - Red

                                                                                                          Premium quality cotton braided HT ignition cable, 7mm OD with a 1.5mm2 multi strand copper core. Plain red fire retarded cotton cloth braiding covers the PVC insulated core. This high quality product is made in the UK.

                                                                                                          Sold Per Meter.

                                                                                                          0.0
                                                                                                          Add first review
                                                                                                          Not rated yet
                                                                                                          • $16.50
                                                                                                          • including GST
                                                                                                          Sorry, we only have 20 of that item available
                                                                                                          • New!

                                                                                                                7mm Cotton Braided HT Ignition Lead - Green/Red

                                                                                                                Premium quality cotton braided HT ignition cable, 7mm OD with a 1.5mm2 multi strand copper core. Green with red flecks, the fire retarded cotton cloth braiding covers the PVC insulated core. This high quality product is made in the UK.

                                                                                                                Sold Per Meter.

                                                                                                                0.0
                                                                                                                Add first review
                                                                                                                Not rated yet
                                                                                                                • $16.50
                                                                                                                • including GST
                                                                                                                Sorry, we only have 23 of that item available
                                                                                                                    • Lister A & B Junior Starting Handle

                                                                                                                      A quality cast iron replacement starting handle suitable for the Lister A, AK & B, BK Junior engine range with a 1.5" crankshaft, the starting handle has a ratchet pin that engages in the crank’s keyway. Equivalent to Lister part number A277.

                                                                                                                      0.0
                                                                                                                      Add first review
                                                                                                                      Not rated yet
                                                                                                                      • $66.00
                                                                                                                      • including GST
                                                                                                                      Sorry, we only have 5 of that item available
                                                                                                                          • Lister A & B Junior Paper Gasket Set SP268/9

                                                                                                                            Paper gasket set for twin flywheel Lister A & B Junior engines, not suitable for early single flywheel engines. Does not include the copper valve plug rings or exhaust manifold gasket which are available separately if required.

                                                                                                                            0.0
                                                                                                                            Add first review
                                                                                                                            Not rated yet
                                                                                                                            • $24.75
                                                                                                                            • including GST
                                                                                                                            Sorry, we only have 9 of that item available
                                                                                                                                • Lister A & AK Junior Piston Ring Set - Later Style 4" Bore

                                                                                                                                  Good quality piston ring set for Lister A petrol engines and AK petrol/kero engines. This ring set is suiatable for the later Juinor engines with a 4” bore, these engines are usually mark as 3hp or 3-1/2hp. The set consists of 3 compression rings and 1 oil scraper ring to suit a standard 4” bore.

                                                                                                                                  0.0
                                                                                                                                  Add first review
                                                                                                                                  Not rated yet
                                                                                                                                  • $55.00
                                                                                                                                  • including GST
                                                                                                                                  Sorry, we only have 18 of that item available
                                                                                                                                      • Lister B & BK Junior Piston Ring Set to Suit 4.5" STD Bore

                                                                                                                                        High quality piston ring set for Lister B & BK engines. This ring set consists of 3 compression rings and 1 oil scraper ring to suit a standard 4.5” bore.

                                                                                                                                        0.0
                                                                                                                                        Add first review
                                                                                                                                        Not rated yet
                                                                                                                                        • $68.20
                                                                                                                                        • including GST
                                                                                                                                        Sorry, we only have 4 of that item available
                                                                                                                                            • Lister A Junior 1.25” BSP Exhaust Silencer

                                                                                                                                              A high-quality reproduction exhaust silencer for Lister A engines, also known as the Lister Junior. These silencers are a copy of the original Lister type, made to original Lister specification, with internal baffles for effective exhaust note silencing.

                                                                                                                                              0.0
                                                                                                                                              Add first review
                                                                                                                                              Not rated yet
                                                                                                                                              • $59.95
                                                                                                                                              • including GST
                                                                                                                                              Sorry, we only have 18 of that item available
                                                                                                                                                  • Pepper Pot Exhaust/Silencer 1.25" BSP Thread

                                                                                                                                                    A high quality small stationary engine silencer that would suit a wide range of stationary engines requiring a 1.25" BSP thread exhaust. This muffler will fit engines such as Lister A Juniors and many others.

                                                                                                                                                    0.0
                                                                                                                                                    Add first review
                                                                                                                                                    Not rated yet
                                                                                                                                                    • $38.50
                                                                                                                                                    • including GST
                                                                                                                                                    Sorry, we only have 6 of that item available
                                                                                                                                                        • 1-1/4” BSP 90 Degree Exhaust Bend & Socket H/D

                                                                                                                                                          Australian made 1-1/4” BSP exhaust elbow and socket suitable for the Lister Junior A Type and any other engine requiring a 1.25” BSP exhaust bend. These 90 Degree long bends are made from heavy wall pipe, complete with male BSP threads both ends, and the female socket attached to one end allows for easy fitment of a male threaded silencer.

                                                                                                                                                          0.0
                                                                                                                                                          Add first review
                                                                                                                                                          Not rated yet
                                                                                                                                                          • $38.50
                                                                                                                                                          • including GST
                                                                                                                                                          Sorry, we only have 3 of that item available
                                                                                                                                                              • Exhaust Flange to Suit Lister A Junior

                                                                                                                                                                New cast iron exhaust flange suitable for the Lister Junior A type 2.5hp, 3hp and 3.5hp engines. This aftermarket exhaust flange is approximately 25mm thick and has a 1.25" BSP female thread and 2 x mounting holes with 60.3mm centres.

                                                                                                                                                                0.0
                                                                                                                                                                Add first review
                                                                                                                                                                Not rated yet
                                                                                                                                                                • $19.80
                                                                                                                                                                • including GST
                                                                                                                                                                Sorry, we only have 79 of that item available
                                                                                                                                                                    • Lister A Junior Exhaust Flange Gasket

                                                                                                                                                                      Made from high temperature asbestos free gasket material in the UK.

                                                                                                                                                                      0.0
                                                                                                                                                                      Add first review
                                                                                                                                                                      Not rated yet
                                                                                                                                                                      • $3.85
                                                                                                                                                                      • including GST
                                                                                                                                                                      Sorry, we only have 24 of that item available
                                                                                                                                                                          • Lister CS, L, J, A & B Crankcase Breather Diaphragm

                                                                                                                                                                            A quality replacement hardened steel diaphragm for the crankcase breather assembly on all Lister CS engines. Will also fit other Lister engines fitted with this style of crankcase breather, including Lister L, J, A & B models, photos 2, 3 and 4 show this style of breather fitted to other Lister engines.

                                                                                                                                                                            0.0
                                                                                                                                                                            Add first review
                                                                                                                                                                            Not rated yet
                                                                                                                                                                            • $5.50
                                                                                                                                                                            • including GST
                                                                                                                                                                            Sorry, we only have 19 of that item available
                                                                                                                                                                                • Lister Starting Handle 5” Replacement Wooden Grip

                                                                                                                                                                                  New replacement handle grip made from splinter resistant wood, the handle measures approximately 5" long with a centre hole drilled for clearance on 1/2" diameter bolt. The handle grip comes coated for protection from the elements and ready for use.

                                                                                                                                                                                  Suitable for the Lister CS and most early single cylinder Lister engine starting handles.

                                                                                                                                                                                  0.0
                                                                                                                                                                                  Add first review
                                                                                                                                                                                  Not rated yet
                                                                                                                                                                                  • $13.75
                                                                                                                                                                                  • including GST
                                                                                                                                                                                  Sorry, we only have 15 of that item available
                                                                                                                                                                                      • Lister A & B Hopper Cooled Decal Set

                                                                                                                                                                                        Decal set for the Lister A & B Hopper Cooled Junior stationary engines, also refered as the "Coffee Pot", 4 transfers are included in this set. These are water slide transfers, instructions for correct use are included. See dimensions below.

                                                                                                                                                                                        0.0
                                                                                                                                                                                        Add first review
                                                                                                                                                                                        Not rated yet
                                                                                                                                                                                        • $24.20
                                                                                                                                                                                        • including GST
                                                                                                                                                                                        Sorry, we only have 2 of that item available
                                                                                                                                                                                            • Lister A & B Tank Cooled Decals

                                                                                                                                                                                              Decal set for the Lister A & B Tank Cooled Junior stationary engines, set of 4 transfers. These are water slide transfers, instructions for correct use are included. See dimensions below.

                                                                                                                                                                                              0.0
                                                                                                                                                                                              Add first review
                                                                                                                                                                                              Not rated yet
                                                                                                                                                                                              • $25.85
                                                                                                                                                                                              • including GST
                                                                                                                                                                                              Sorry, we only have 5 of that item available
                                                                                                                                                                                                  • Lister Decals 4” Rotation Direction Arrows (Pair)

                                                                                                                                                                                                    Pair of 4” rotation direction arrows for smaller Lister engines including the Lister D, A & B Juniors, and H. This pair of opposing arrows allows for placement on both left and right side flywheels for 2 flywheel models and can be used on both Clockwise and Anti-clockwise by simply switching placement or arrow used.

                                                                                                                                                                                                    Sold in Opposing Pairs (As Shown in Photo)

                                                                                                                                                                                                    0.0
                                                                                                                                                                                                    Add first review
                                                                                                                                                                                                    Not rated yet
                                                                                                                                                                                                    • $9.90
                                                                                                                                                                                                    • including GST
                                                                                                                                                                                                    Sorry, we only have 6 of that item available
                                                                                                                                                                                                        • Inlet & Exhaust Valve to Suit Lister Junior A Type

                                                                                                                                                                                                          A new inlet or exhaust valve suitable for the Lister Junior A type engines from 2.5HP to 3.5HP. Equivalent to Lister part numbers H55IN & H55EX.

                                                                                                                                                                                                          Valves are Sold individually.

                                                                                                                                                                                                          0.0
                                                                                                                                                                                                          Add first review
                                                                                                                                                                                                          Not rated yet
                                                                                                                                                                                                          • $44.00
                                                                                                                                                                                                          • including GST
                                                                                                                                                                                                          Sorry, we only have 6 of that item available
                                                                                                                                                                                                              • Lister B & BK Inlet & Exhaust Valve 3381IN & 3381EX

                                                                                                                                                                                                                New Lister Junior B & BK valves, suitable for inlet and exhaust. These valves are forged, and precision machined from EN52 material as per original Lister specs. Equivalent to Lister part numbers 3381IN (Inlet) and 3381EX (Exhaust).

                                                                                                                                                                                                                Valves are Sold individually.

                                                                                                                                                                                                                0.0
                                                                                                                                                                                                                Add first review
                                                                                                                                                                                                                Not rated yet
                                                                                                                                                                                                                • $66.00
                                                                                                                                                                                                                • including GST
                                                                                                                                                                                                                Sorry, we only have 4 of that item available
                                                                                                                                                                                                                    • 5/16 BSW Brass Wing Nut Suit Lister Oil Filler Flap

                                                                                                                                                                                                                      This 5/16 cast brass wing nut is a sutable replacment for the oil filler flap of all Lister CS engines. It is also suitable for many other Lister stationary engines, or any other use requiring a 5/16 BSW brass wing nut.

                                                                                                                                                                                                                      5.0
                                                                                                                                                                                                                      Add first review
                                                                                                                                                                                                                      Score: 5.0 (votes: 1)
                                                                                                                                                                                                                      No reviews.
                                                                                                                                                                                                                      • $3.85
                                                                                                                                                                                                                      • including GST
                                                                                                                                                                                                                      Sorry, we only have 61 of that item available
                                                                                                                                                                                                                          • Lister Fuel & Oil Pump Non-Asbestos Packing Cord

                                                                                                                                                                                                                            Fuel & Oil Pump packing cord suitable for the Fuel/Oil pumps on all Lister H, J, K, L, M, N, P, R, Q models, P/N 3335. Also suitable for the Lister A & B Junior pump packing P/N 3335. This tried and tested self-lubricated cord is impregnated with fuel resistant lubricant making it ideal for this application.

                                                                                                                                                                                                                            Sold Per Meter

                                                                                                                                                                                                                            0.0
                                                                                                                                                                                                                            Add first review
                                                                                                                                                                                                                            Not rated yet
                                                                                                                                                                                                                            • $16.50
                                                                                                                                                                                                                            • including GST
                                                                                                                                                                                                                            Sorry, we only have 24 of that item available
                                                                                                                                                                                                                                • Lister A & B Junior Governor Quadrant P/N A130

                                                                                                                                                                                                                                  New brass governor quadrant for the Lister A, AK & B, BK Junior engines. This is an often overlooked and worn part that will greatly affect the governing of these engines. Suits both tank cooled, and hopper cooled Junior engines, original Lister part number A130.

                                                                                                                                                                                                                                  0.0
                                                                                                                                                                                                                                  Add first review
                                                                                                                                                                                                                                  Not rated yet
                                                                                                                                                                                                                                  • $27.50
                                                                                                                                                                                                                                  • including GST
                                                                                                                                                                                                                                  Sorry, we only have 9 of that item available
                                                                                                                                                                                                                                      • Lister Governor Hook - A, B, D & CS

                                                                                                                                                                                                                                        This Lister governor hook is a nice reproduction of the original used on many Lister diesel, petrol and paraffin engines including the Lister A, B, D and CS, would also be a suitable replacement on L and J type engines.

                                                                                                                                                                                                                                        0.0
                                                                                                                                                                                                                                        Add first review
                                                                                                                                                                                                                                        Not rated yet
                                                                                                                                                                                                                                        • $8.80
                                                                                                                                                                                                                                        • including GST
                                                                                                                                                                                                                                        Sorry, we only have 42 of that item available
                                                                                                                                                                                                                                            • Genuine Lister Governor Hook P/N 003-00176

                                                                                                                                                                                                                                              Genuine Lister governor hooks suitable for a wide range of engines in including the CS, A & B Junior, L & J petrol engines, and others. Note that this is the hook only being sold here, there is NO adjusting nut included.

                                                                                                                                                                                                                                              0.0
                                                                                                                                                                                                                                              Add first review
                                                                                                                                                                                                                                              Not rated yet
                                                                                                                                                                                                                                              • $11.00
                                                                                                                                                                                                                                              • including GST
                                                                                                                                                                                                                                              Sorry, we only have 11 of that item available
                                                                                                                                                                                                                                                  • Lister A & B Junior Valve Cap Joints B91 (Pair)

                                                                                                                                                                                                                                                    High quality valve cap sealing joints made just like the originals, with a rolled copper fire ring around high temp gasket material. These gaskets fit under the threaded brass plugs that sit over the valves on both tank cooled, and hopper cooled Lister A & B Junior engines.

                                                                                                                                                                                                                                                    Not suitable for the early single flywheel models which have a much smaller seal.

                                                                                                                                                                                                                                                    Sold in Pairs.

                                                                                                                                                                                                                                                    0.0
                                                                                                                                                                                                                                                    Add first review
                                                                                                                                                                                                                                                    Not rated yet
                                                                                                                                                                                                                                                    • $22.00
                                                                                                                                                                                                                                                    • including GST
                                                                                                                                                                                                                                                    Sorry, we only have 185 of that item available
                                                                                                                                                                                                                                                        • Lister Junior A & B Type Flywheel Gib Key A175

                                                                                                                                                                                                                                                          Flywheel gib key suitable for Lister A & B Type Junior engines, equivalent to original Lister part number A175. This 7/16” wide key is approximately 3.75” (96mm) long.

                                                                                                                                                                                                                                                          Sold Individually.

                                                                                                                                                                                                                                                          0.0
                                                                                                                                                                                                                                                          Add first review
                                                                                                                                                                                                                                                          Not rated yet
                                                                                                                                                                                                                                                          • $11.00
                                                                                                                                                                                                                                                          • including GST
                                                                                                                                                                                                                                                          Sorry, we only have 31 of that item available
                                                                                                                                                                                                                                                              • Genuine Lister Junior 1.5” Starting Handle A277

                                                                                                                                                                                                                                                                Genuine Lister Junior A & B crank starting handle, for all twin flywheel models with a 1.5” crankshaft. The handle has a reversable clutch pin that makes it suitable for both clockwise and anti-clockwise rotation engines.

                                                                                                                                                                                                                                                                0.0
                                                                                                                                                                                                                                                                Add first review
                                                                                                                                                                                                                                                                Not rated yet
                                                                                                                                                                                                                                                                • $110.00
                                                                                                                                                                                                                                                                • including GST
                                                                                                                                                                                                                                                                Sorry, we only have 1 of that item available
                                                                                                                                                                                                                                                                    • 5/8 Whitworth Studs (BSW)

                                                                                                                                                                                                                                                                      5/8 BSW mild steel studs in lengths commonly used on Lister engines, please select required length from drop down menu. These 5/8 Whitworth studs could also be used for any other application requiring this size.

                                                                                                                                                                                                                                                                      See below for typical applications on Lister engines.

                                                                                                                                                                                                                                                                      0.0
                                                                                                                                                                                                                                                                      Add first review
                                                                                                                                                                                                                                                                      Not rated yet
                                                                                                                                                                                                                                                                      • $3.85
                                                                                                                                                                                                                                                                      • including GST
                                                                                                                                                                                                                                                                      Sorry, we only have 30 of that item available
                                                                                                                                                                                                                                                                          • Lister A, AK & B, BK (Junior) Stationary Engine Magneto Drive Chain

                                                                                                                                                                                                                                                                            Lister A, AK & B, BK (Junior) stationary engine magneto drive chain, this high-quality Tsubaki (Made in Japan) Simplex roller chain has been made to the correct length for use on Lister engine models A, AK & B, BK, commonly known as The Lister Junior. Fits both tank cooled and hopper cooled versions on these engines.

                                                                                                                                                                                                                                                                            0.0
                                                                                                                                                                                                                                                                            Add first review
                                                                                                                                                                                                                                                                            Not rated yet
                                                                                                                                                                                                                                                                            • $33.00
                                                                                                                                                                                                                                                                            • including GST
                                                                                                                                                                                                                                                                            Sorry, we only have 9 of that item available
                                                                                                                                                                                                                                                                                • Lister A Type Junior Main Bearing Bush NOS P/N A326

                                                                                                                                                                                                                                                                                  New old stock Lister A type Junior main bearing, Lister part number A326. This bearing is not suitable for the early single flywheel models.

                                                                                                                                                                                                                                                                                  These are extremely hard to find these days, so take advantage while stocks last.

                                                                                                                                                                                                                                                                                  0.0
                                                                                                                                                                                                                                                                                  Add first review
                                                                                                                                                                                                                                                                                  Not rated yet
                                                                                                                                                                                                                                                                                  • $165.00
                                                                                                                                                                                                                                                                                  • including GST
                                                                                                                                                                                                                                                                                  Out of stock
                                                                                                                                                                                                                                                                                      • Brass Fuel Tank Fitting Sets for Lister Petrol Engines & Others

                                                                                                                                                                                                                                                                                        New brass fuel tank fittings for vintage Lister petrol engines, would also be suitable for many other stationary engines. Available with either a 3/8 BSP or 1/2 BSP return line fitting, please select size requirements from the drop-down menu.

                                                                                                                                                                                                                                                                                        0.0
                                                                                                                                                                                                                                                                                        Add first review
                                                                                                                                                                                                                                                                                        Not rated yet
                                                                                                                                                                                                                                                                                        • $44.00
                                                                                                                                                                                                                                                                                        • including GST
                                                                                                                                                                                                                                                                                        Sorry, we only have 1 of that item available
                                                                                                                                                                                                                                                                                            • Gib Key Puller 1.5" C/W Bolts

                                                                                                                                                                                                                                                                                              This 1.5" heavy duty flywheel Gib Key Puller. There is no guarantee that this tool is going to get all stuck keys out, I have personally used this puller with success and failure, some keys act like they are welded in place, but it's defiantly going to give you a good chance at winning the battle.

                                                                                                                                                                                                                                                                                              0.0
                                                                                                                                                                                                                                                                                              Add first review
                                                                                                                                                                                                                                                                                              Not rated yet
                                                                                                                                                                                                                                                                                              • $88.00
                                                                                                                                                                                                                                                                                              • including GST
                                                                                                                                                                                                                                                                                              Only 1 left in stock
                                                                                                                                                                                                                                                                                              Sorry, we only have 1 of that item available

                                                                                                                                                                                                                                                                                            Footer navigation