Lister D & DK Parts

    • New!

          7/16” Brass Washer Suit Lister D Cylinder Head Washer S545

          7/16” x 7/8” imperial brass washer suitable for Lister D cylinder head stud washers, these are new old stock washers with the correct clearance to suit 7/16” BSW bolts and studs. Replaces Lister D part number S545.

          Sold individually.

          0.0
          Add first review
          Not rated yet
          • $1.10
          • including GST
          Sorry, we only have 385 of that item available
          • New!

                Stationary Engine “Water Level” Transfer (Decal)

                A water level transfer suitable for many water cooled vintage stationary engines, would suit both engine mounted hoppers and separate water tanks. These are water slide transfers, instructions for correct use are included. See dimensions below.

                0.0
                Add first review
                Not rated yet
                • $11.55
                • including GST
                Sorry, we only have 15 of that item available
                • New!

                      ¼” BSP Brass Bent Nose Water Drain Tap

                      New brass vintage style bent nose water drain tap with ¼” BSP thread, suitable for many vintage stationary engines including the Lister D.

                      0.0
                      Add first review
                      Not rated yet
                      • $17.60
                      • including GST
                      Sorry, we only have 22 of that item available
                      • New!

                            Lister D Carburettor Jet 1/780

                            Genuine Lister D carburettor main jet, part number 1/780 or 1-780. Please check if this part is suitable for engine before purchasing, may not be suitable for all Lister D models.

                            0.0
                            Add first review
                            Not rated yet
                            • $66.00
                            • including GST
                            Sorry, we only have 6 of that item available
                            • New!

                                  Lister D Carburettor Air Valve D109

                                  Genuine Lister D carburettor air valve, part numbers D109, 1/109, 004-00109.

                                  0.0
                                  Add first review
                                  Not rated yet
                                  • $33.00
                                  • including GST
                                  Sorry, we only have 6 of that item available
                                  • New!

                                        Lister D & DK Governor Casting Bush (Long) 1-4301

                                        Genuine new old stock Lister D & DK governor casting bush (Long), part number 1-4301 or D43. See image 2 for location of this bush.

                                        0.0
                                        Add first review
                                        Not rated yet
                                        • $33.00
                                        • including GST
                                        Sorry, we only have 6 of that item available
                                        • New!

                                              Lister D Governor Rod Spring Washer S418

                                              Genuine new old stock Lister D governor rod spring washer, commonly known as a Thackeray washer or double coil washer. Lister part number S418, 27-418 or 027-00418.

                                              Sold Individually.

                                              0.0
                                              Add first review
                                              Not rated yet
                                              • $5.50
                                              • including GST
                                              Sorry, we only have 61 of that item available
                                              • New!

                                                    Spark Plug Lead Spade Terminal for 7mm HT Cable (Solder Connection)

                                                    Brass spade type spark plug lead terminal for connecting HT lead end to standard type spark plugs with a terminal nut for fixing the cable securely.

                                                    Sold Individually

                                                    0.0
                                                    Add first review
                                                    Not rated yet
                                                    • $5.50
                                                    • including GST
                                                    Sorry, we only have 8 of that item available
                                                    • New!

                                                          7mm HT Ignition Lead Black PVC (Per Meter)

                                                          Copper core 7mm HT ignition lead, sold per meter. Taken from 100 meter roll, if you require more than one meter simply add more to your cart and it will be sent as one continuous length where possible.

                                                          Sold Per Meter.

                                                          0.0
                                                          Add first review
                                                          Not rated yet
                                                          • $8.80
                                                          • including GST
                                                          Sorry, we only have 151 of that item available
                                                          • New!

                                                                7mm Cotton Braided HT Ignition Lead - Black

                                                                Premium quality cotton braided HT ignition cable, 7mm OD with a 1.5mm2 multi strand copper core. Plain black fire retarded cotton cloth braiding covers the PVC insulated core. This high quality product is made in the UK.

                                                                Sold Per Meter.

                                                                0.0
                                                                Add first review
                                                                Not rated yet
                                                                • $16.50
                                                                • including GST
                                                                Sorry, we only have 12 of that item available
                                                                • New!

                                                                      7mm Cotton Braided HT Ignition Lead - Red/Yellow

                                                                      Premium quality cotton braided HT ignition cable, 7mm OD with a 1.5mm2 multi strand copper core. Red with yellow flecks, the fire retarded cotton cloth braiding covers the PVC insulated core. This high quality product is made in the UK.

                                                                      Sold Per Meter.

                                                                      0.0
                                                                      Add first review
                                                                      Not rated yet
                                                                      • $16.50
                                                                      • including GST
                                                                      Sorry, we only have 15 of that item available
                                                                      • New!

                                                                            7mm Cotton Braided HT Ignition Lead - Yellow/Black

                                                                            Premium quality cotton braided HT ignition cable, 7mm OD with a 1.5mm2 multi strand copper core. Yellow with black flecks, the fire retarded cotton cloth braiding covers the PVC insulated core. This high quality product is made in the UK.

                                                                            Sold Per Meter.

                                                                            0.0
                                                                            Add first review
                                                                            Not rated yet
                                                                            • $16.50
                                                                            • including GST
                                                                            Sorry, we only have 48 of that item available
                                                                            • New!

                                                                                  7mm Cotton Braided HT Ignition Lead - Red

                                                                                  Premium quality cotton braided HT ignition cable, 7mm OD with a 1.5mm2 multi strand copper core. Plain red fire retarded cotton cloth braiding covers the PVC insulated core. This high quality product is made in the UK.

                                                                                  Sold Per Meter.

                                                                                  0.0
                                                                                  Add first review
                                                                                  Not rated yet
                                                                                  • $16.50
                                                                                  • including GST
                                                                                  Sorry, we only have 20 of that item available
                                                                                  • New!

                                                                                        7mm Cotton Braided HT Ignition Lead - Green/Red

                                                                                        Premium quality cotton braided HT ignition cable, 7mm OD with a 1.5mm2 multi strand copper core. Green with red flecks, the fire retarded cotton cloth braiding covers the PVC insulated core. This high quality product is made in the UK.

                                                                                        Sold Per Meter.

                                                                                        0.0
                                                                                        Add first review
                                                                                        Not rated yet
                                                                                        • $16.50
                                                                                        • including GST
                                                                                        Sorry, we only have 23 of that item available
                                                                                        • New!

                                                                                              Lister D, DK, A, AK, B, BK, CD & CE Governor Spring - Slow Speed

                                                                                              A new high quality reproduction governor spring suitable for low speed Lister D, DK, A, AK, B & BK petrol & petrol/kerosine engines and CD & CE diesel engines. See suitable speed ranges below.

                                                                                              0.0
                                                                                              Add first review
                                                                                              Not rated yet
                                                                                              • $8.80
                                                                                              • including GST
                                                                                              Sorry, we only have 8 of that item available
                                                                                                  • Lister D, DK, A, AK, B, BK, CD & CE Governor Spring - High Speed

                                                                                                    A new high quality reproduction governor spring suitable for high speed Lister D, DK, A, AK, B & BK petrol & petrol/kerosine engines and CD & CE diesel engines. See suitable speed ranges below. Equivalent to Lister Part Number: J127

                                                                                                    0.0
                                                                                                    Add first review
                                                                                                    Not rated yet
                                                                                                    • $7.70
                                                                                                    • including GST
                                                                                                    Sorry, we only have 35 of that item available
                                                                                                        • Lister D Hopper Lid Cover D112H

                                                                                                          New cast iron reproduction hopper cooled Lister D cover, equivalent to Lister part number D112H. Suitable for all Lister D & DK engines, these high quality reproduction castings are drilled and machined ready to fit to your engine.

                                                                                                          0.0
                                                                                                          Add first review
                                                                                                          Not rated yet
                                                                                                          • $55.00
                                                                                                          • including GST
                                                                                                          Sorry, we only have 7 of that item available
                                                                                                              • Lister D & DK Piston Ring Set - 3” STD Size

                                                                                                                Good quality piston ring set for Lister D petrol engines and DK petrol/kero engines. This ring set consists of 3 compression rings and 1 oil scraper ring to suit a standard 3” bore.

                                                                                                                0.0
                                                                                                                Add first review
                                                                                                                Not rated yet
                                                                                                                • $42.90
                                                                                                                • including GST
                                                                                                                Sorry, we only have 11 of that item available
                                                                                                                    • Lister D & DK Copper Head Gasket P/N D91

                                                                                                                      A new high quality Lister D copper head gasket, with copper sheeting both sides and copper fire ring. The inner material is made from non asbestos material.

                                                                                                                      0.0
                                                                                                                      Add first review
                                                                                                                      Not rated yet
                                                                                                                      • $25.30
                                                                                                                      • including GST
                                                                                                                      Sorry, we only have 12 of that item available
                                                                                                                          • Lister D Full Paper Gasket Set

                                                                                                                            Full paper gasket comprising of every paper gasket needed for a complete rebuild of the Lister D type engines. Does not include the copper head gasket which is available to purchase separately in our store.

                                                                                                                            0.0
                                                                                                                            Add first review
                                                                                                                            Not rated yet
                                                                                                                            • $25.30
                                                                                                                            • including GST
                                                                                                                            Only 2 left in stock
                                                                                                                            Sorry, we only have 2 of that item available
                                                                                                                                • Champion D16 Spark Plug

                                                                                                                                  Brand new D16 spark plug, suits many vintage stationary engines including Lister A & B Junior, Lister H, J, K, L, M, N, P, R & Q, Ronaldson & Tippett N Type, Moffat-Virtue V3 and many others.

                                                                                                                                  0.0
                                                                                                                                  Add first review
                                                                                                                                  Not rated yet
                                                                                                                                  • $12.65
                                                                                                                                  • including GST
                                                                                                                                  Sorry, we only have 20 of that item available
                                                                                                                                      • Exhaust Silencer Suit Lister D & LD - 1" BSP Shallow Type

                                                                                                                                        A good quality reproduction exhaust silencer suitable for the Lister D & DK petrol/kero engines and the LD1 diesel engines. These silencers have an internal baffle, so they will be effective in quieting down your engine, as well as looking the part.

                                                                                                                                        0.0
                                                                                                                                        Add first review
                                                                                                                                        Not rated yet
                                                                                                                                        • $59.00
                                                                                                                                        • including GST
                                                                                                                                        Sorry, we only have 9 of that item available
                                                                                                                                            • Lister D Exhaust Silencer 1" BSP - Deep Type

                                                                                                                                              A good quality reproduction exhaust silencer for Lister D and DK engines. These silencers have internal baffles for effective exhaust note silencing.

                                                                                                                                              0.0
                                                                                                                                              Add first review
                                                                                                                                              Not rated yet
                                                                                                                                              • $59.40
                                                                                                                                              • including GST
                                                                                                                                              Sorry, we only have 19 of that item available
                                                                                                                                                  • Pepper Pot Exhaust/Silencer 1" BSP Thread

                                                                                                                                                    A high quality small stationary engine silencer that would suit a wide range of stationary engines requiring a 1' BSP thread exhaust. This muffler will fit engines such as Lister D, Rosebery/Buzacott, Ronaldson & Tippett and many others.

                                                                                                                                                    0.0
                                                                                                                                                    Add first review
                                                                                                                                                    Not rated yet
                                                                                                                                                    • $28.50
                                                                                                                                                    • including GST
                                                                                                                                                    Sorry, we only have 66 of that item available
                                                                                                                                                        • Lister D & DK Exhaust Flange 1” BSP

                                                                                                                                                          A good quality solid cast iron exhaust flange for Lister D & DK engines. The thread is 1 Inch BSP female, to suit original or our reproduction 1” BSP exhaust pipes. The fixing hole centres are 2 inches apart.

                                                                                                                                                          0.0
                                                                                                                                                          Add first review
                                                                                                                                                          Not rated yet
                                                                                                                                                          • $15.40
                                                                                                                                                          • including GST
                                                                                                                                                          Sorry, we only have 100 of that item available
                                                                                                                                                              • Lister D & DK Flywheel Gib Key H75

                                                                                                                                                                A replacement flywheel Gib key suitable for use on the Lister D & DK type engines, equivalent to Lister part number H75.These new Gib Keys may need final filling and size adjustments to suit your engines unique flywheel keyway.

                                                                                                                                                                0.0
                                                                                                                                                                Add first review
                                                                                                                                                                Not rated yet
                                                                                                                                                                • $11.00
                                                                                                                                                                • including GST
                                                                                                                                                                Sorry, we only have 7 of that item available
                                                                                                                                                                    • Lister D & DK Magneto Drive Chain

                                                                                                                                                                      Lister D & DK stationary engine magneto drive chain, this high-quality Tsubaki (Made in Japan) Simplex roller chain has been made to the correct length for use on Lister D engines.

                                                                                                                                                                      0.0
                                                                                                                                                                      Add first review
                                                                                                                                                                      Not rated yet
                                                                                                                                                                      • $27.50
                                                                                                                                                                      • including GST
                                                                                                                                                                      Sorry, we only have 9 of that item available
                                                                                                                                                                          • Genuine Lister Governor Hook P/N 003-00176

                                                                                                                                                                            Genuine Lister governor hooks suitable for a wide range of engines in including the CS, A & B Junior, L & J petrol engines, and others. Note that this is the hook only being sold here, there is NO adjusting nut included.

                                                                                                                                                                            0.0
                                                                                                                                                                            Add first review
                                                                                                                                                                            Not rated yet
                                                                                                                                                                            • $11.00
                                                                                                                                                                            • including GST
                                                                                                                                                                            Sorry, we only have 11 of that item available
                                                                                                                                                                                • 1/8 BSP Brass Greaser

                                                                                                                                                                                  A 1/8 BSP thread brass greaser suitable for use on many Lister and other stationary engines including the rocker greaser on Lister D & DK, CS. Original Lister part numbers 27-606, 027-00606, S606.

                                                                                                                                                                                  Could also be used for any other application requiring a 1/8 BSP thread brass greaser.

                                                                                                                                                                                  0.0
                                                                                                                                                                                  Add first review
                                                                                                                                                                                  Not rated yet
                                                                                                                                                                                  • $9.90
                                                                                                                                                                                  • including GST
                                                                                                                                                                                  Sorry, we only have 33 of that item available
                                                                                                                                                                                      • Lister D & DK Decals Set

                                                                                                                                                                                        Decal set for the Lister D and DK engines. These are water slide transfers, instructions for correct use are included. See dimensions below.

                                                                                                                                                                                        0.0
                                                                                                                                                                                        Add first review
                                                                                                                                                                                        Not rated yet
                                                                                                                                                                                        • $23.65
                                                                                                                                                                                        • including GST
                                                                                                                                                                                        Sorry, we only have 12 of that item available
                                                                                                                                                                                            • Lister D & DK Valve Spring Set (Pair) D323

                                                                                                                                                                                              A high quality pair of precision made valve springs for the Lister D & DK type engines. Made from 55CrSi oil tempered and quenched spring steel wire, with a further tempering and shot peening treatment after manufacturing, the ends have been precision ground, and finally, a light coating of anti-rust oil applied for corrosion prevention. Equivalent to Lister part number D323 or 001-00323.

                                                                                                                                                                                              0.0
                                                                                                                                                                                              Add first review
                                                                                                                                                                                              Not rated yet
                                                                                                                                                                                              • $22.00
                                                                                                                                                                                              • including GST
                                                                                                                                                                                              Sorry, we only have 198 of that item available
                                                                                                                                                                                                  • 7/16 Whitworth Studs (BSW)

                                                                                                                                                                                                    7/16 BSW mild steel studs in lengths commonly used on Lister engines, please select required length from drop down menu. These 7/16 Whitworth studs could also be used for any other application requiring this size. Sizes from 1-1/2" to 5" Long available.

                                                                                                                                                                                                    See below for typical applications on Lister engines.

                                                                                                                                                                                                    0.0
                                                                                                                                                                                                    Add first review
                                                                                                                                                                                                    Not rated yet
                                                                                                                                                                                                    • $2.20
                                                                                                                                                                                                    • including GST
                                                                                                                                                                                                    Sorry, we only have 50 of that item available
                                                                                                                                                                                                        • Lister Decals 4” Rotation Direction Arrows (Pair)

                                                                                                                                                                                                          Pair of 4” rotation direction arrows for smaller Lister engines including the Lister D, A & B Juniors, and H. This pair of opposing arrows allows for placement on both left and right side flywheels for 2 flywheel models and can be used on both Clockwise and Anti-clockwise by simply switching placement or arrow used.

                                                                                                                                                                                                          Sold in Opposing Pairs (As Shown in Photo)

                                                                                                                                                                                                          0.0
                                                                                                                                                                                                          Add first review
                                                                                                                                                                                                          Not rated yet
                                                                                                                                                                                                          • $9.90
                                                                                                                                                                                                          • including GST
                                                                                                                                                                                                          Sorry, we only have 6 of that item available
                                                                                                                                                                                                              • Lister D Main Bearing - Crank Pin End

                                                                                                                                                                                                                Replacement main bearing for the Lister D engine, this quality ball bearing is suitable for use on the crank pin end of Lister D & DK engines.

                                                                                                                                                                                                                Equivalent to Lister part number D8.

                                                                                                                                                                                                                0.0
                                                                                                                                                                                                                Add first review
                                                                                                                                                                                                                Not rated yet
                                                                                                                                                                                                                • $44.00
                                                                                                                                                                                                                • including GST
                                                                                                                                                                                                                Out of stock
                                                                                                                                                                                                                    • Lister D Main Bearing - Flywheel End

                                                                                                                                                                                                                      Replacement main bearing for the Lister D engine, this quality ball bearing is suitable for use on the flywheel end of Lister D & DK engines.

                                                                                                                                                                                                                      Equivalent to Lister part number D7.

                                                                                                                                                                                                                      0.0
                                                                                                                                                                                                                      Add first review
                                                                                                                                                                                                                      Not rated yet
                                                                                                                                                                                                                      • $38.50
                                                                                                                                                                                                                      • including GST
                                                                                                                                                                                                                      Out of stock
                                                                                                                                                                                                                          • Lister D & DK Big End Bearing D-19 - Non-Genuine

                                                                                                                                                                                                                            Replacement Lister D & DK big end bearing equivalent to Lister P/N D-19, these newly made aftermarket phosphor bronze bearings have been expertly made to be a suitable replacement in place of the original white metal backed bearing often worn out.

                                                                                                                                                                                                                            0.0
                                                                                                                                                                                                                            Add first review
                                                                                                                                                                                                                            Not rated yet
                                                                                                                                                                                                                            • $38.50
                                                                                                                                                                                                                            • including GST
                                                                                                                                                                                                                            Out of stock
                                                                                                                                                                                                                                • Repair Sleeve/Liner Suit 3” Bore for Lister D’s

                                                                                                                                                                                                                                  A very high quality 3" cylinder liner or repair sleeve also known as a dry sleeve for the Lister D petrol and paraffin models. Will also suit any other vintage stationary engine with a 3” bore needing a sleeve fitted. Please see details of dimensions below.

                                                                                                                                                                                                                                  0.0
                                                                                                                                                                                                                                  Add first review
                                                                                                                                                                                                                                  Not rated yet
                                                                                                                                                                                                                                  • $53.00
                                                                                                                                                                                                                                  • including GST
                                                                                                                                                                                                                                  Sorry, we only have 3 of that item available

                                                                                                                                                                                                                                Footer navigation