Sale

Items: 119 of 19, per page
  • Genuine Lister Petter TR Cylinder Head Assembly 570-33630 - NEW
    • New!
    • 40% off

    Genuine new old stock Lister Petter TR cylinder head assembly complete with valves, guides springs etc, suitable for TR1, TR2 & TR3 air cooled diesel engines. Part number 570-33630.

    • $264.00
    • including GST

    Not rated yet
    Only 1 left in stock
  • Lister SR Cylinder Head C/W Valves P/N 570-11741 - Reconditioned
    • New!
    • 40% off

    A fully reconditioned SR1, SR2 & SR3 cylinder head, these heads have been cleaned, serviced and new valves fitted ready for use. Part number 570-11741, later big valve type for high speed engines up to 2500RPM.

    • $165.00
    • including GST

    Not rated yet
  • Lister A & B Junior, HR, HRW, LD, LR, SL, SR, ST & SW Type 1.5" Starting Handle
    • 40% off

    STOCK CLEARANCE SALE! New Improved Version Now Available.
    Cast iron replacement starting handle suitable for most Lister engines requiring a 1.5" crank starting handle. It is known be used on Lister A & B Juniors, HR, HRW, LD, LR, SL, SR, ST and SW.

    • $28.35
    • including GST

    Not rated yet
  • Lister CS Aluminium Piston Set 4.5"
    • 40% off

    New high quality replacement Aluminium piston for use in both genuine Lister CS and Indian Listeroid engines with a 4.5" (114.3mm) bore. Tried and tested in genuine Lister 6-1 engines with good feedback.

    • $66.00
    • including GST

    Not rated yet
  • Genuine CAV Lister HA6, HB6 & HW6 Fuel Pump 356-22531
    • New!
    • 35% off

    Genuine new old stock CAV fuel pumps for the Lister HA6, HB6 & HW6, Lister part number 356-22531, CAV part number AAR6D75Y153.

    • $715.00
    • including GST

    Not rated yet
  • Listeriod Gasket Set for 8-1 Single Cylinder Engines
    • 35% off

    Complete overhaul gasket set for Indian Listeriod type CS engines with a 4.5' (114.3mm) bore and taper roller bearings. Includes head gasket for Listeriod type engines with 5 stud heads.

    • $35.75
    • including GST

    Not rated yet
  • Genuine Bryce Lister Petter TX Series Fuel Pump P/N 201-44593
    • New!
    • 20% off

    Genuine new old stock Lister Petter TX series fuel pump, Lister Petter part number 201-44593.

    Bryce number FAOANO80E0884 or FAOANO80E0846.

    • $277.20
    • including GST

    Not rated yet
  • Genuine Bryce Injection Pump Lister Petter 751-41323 LPW, LPA
    • New!
    • 20% off

    Genuine new old stock Bryce injector pump FAQAN065A0874, suitable for Lister Petter LPW, LPA, Onan, 186-6450, 751-41323.

    • $264.00
    • including GST

    Not rated yet
  • Lister LT & LV Fuel Pump Bryce FAOAN075E0782
    • New!
    • 15% off

    Genuine new old stock Bryce fuel pump for Lister Petter LT & LV series engines, Lister Petter part number 601-40652. The FAOAN075E0782 pump supersedes and replaces the FAOAN065E0730 and FAOAN065E0741 pumps, equivalent to Lister part numbers 601-21714, 601-21716 and 601-40650, 601-40651.

    • $280.50
    • including GST

    Not rated yet
  • Brass Drip Sight Feed Oiler/Lubricator 1/2 BSP x 500 ML
    • 5% off

    This 500ml quality made solid brass bodied sight feed lubricator with clear Acrylic window will mount directly onto lubrication points via a 1/2 BSP male thread. It offers a single point lubrication option for your engine or machine that dispenses oil by gravity from a transparent reservoir through a needle valve. It is recommended for lubrication points where a supply of oil under visible control is required.

    • $120.18
    • including GST

    Not rated yet
    Only 2 left in stock
  • Brass Drip Feed Oiler/Lubricator 1/2 BSP x 320 ML
    • 5% off

    This 320ml quality made solid brass bodied sight feed lubricator with clear Acrylic window will mount directly onto lubrication points via a 1/2 BSP male thread. It offers a single point lubrication option for your engine or machine that dispenses oil by gravity from a transparent reservoir through a needle valve. It is recommended for lubrication points where a supply of oil under visible control is required.

    • $83.60
    • including GST

    Not rated yet
    Only 1 left in stock
  • Brass Drip Feed Oiler/Lubricator 3/8 BSP x 320 ML
    • 5% off

    This 320ml quality made solid brass bodied sight feed lubricator with clear Acrylic window will mount directly onto lubrication points via a 3/8 BSP male thread. It offers a single point lubrication option for your engine or machine that dispenses oil by gravity from a transparent reservoir through a needle valve. It is recommended for lubrication points where a supply of oil under visible control is required.

    • $83.60
    • including GST

    Not rated yet
    Only 2 left in stock
  • Brass Drip Feed Oiler/Lubricator 3/8 BSP x 170 ML
    • 5% off

    This 170ml quality made solid brass bodied sight feed lubricator with clear Acrylic window will mount directly onto lubrication points via a 3/8 BSP male thread. It offers a single point lubrication option for your engine or machine that dispenses oil by gravity from a transparent reservoir through a needle valve. It is recommended for lubrication points where a supply of oil under visible control is required.

    • $74.10
    • including GST

    Not rated yet
    Only 3 left in stock
  • Brass Drip Feed Oiler/Lubricator 3/8 BSP x 100 ML
    • 5% off

    This 100ml quality made solid brass bodied sight feed lubricator with clear Acrylic window will mount directly onto lubrication points via a 3/8 BSP male thread. It offers a single point lubrication option for your engine or machine that dispenses oil by gravity from a transparent reservoir through a needle valve. It is recommended for lubrication points where a supply of oil under visible control is required.

    • $64.13
    • including GST

    Not rated yet
    Only 5 left in stock
  • Brass Drip Feed Oiler/Lubricator 1/4 BSP x 100 ML
    • 5% off

    This 100ml quality made solid brass bodied sight feed lubricator with clear Acrylic window will mount directly onto lubrication points via a 1/4 BSP male thread. It offers a single point lubrication option for your engine or machine that dispenses oil by gravity from a transparent reservoir through a needle valve. It is recommended for lubrication points where a supply of oil under visible control is required.

    • $64.13
    • including GST

    Not rated yet
  • Brass Drip Feed Oiler/Lubricator 1/4 BSP x 50 ML
    • 5% off

    This 50ml quality made solid brass bodied sight feed lubricator with clear Acrylic window will mount directly onto lubrication points via a 1/4 BSP male thread. It offers a single point lubrication option for your engine or machine that dispenses oil by gravity from a transparent reservoir through a needle valve. It is recommended for lubrication points where a supply of oil under visible control is required.

    • $43.70
    • including GST

    Not rated yet
    Only 4 left in stock
  • Brass Drip Feed Oiler/Lubricator 1/8 BSP x 50 ML
    • 5% off

    This 50ml quality made solid brass bodied sight feed lubricator with clear Acrylic window will mount directly onto lubrication points via a 1/8 BSP male thread. It offers a single point lubrication option for your engine or machine that dispenses oil by gravity from a transparent reservoir through a needle valve. It is recommended for lubrication points where a supply of oil under visible control is required.

    • $43.70
    • including GST

    Not rated yet
    Only 3 left in stock
  • Brass Drip Feed Oiler/Lubricator 1/4 BSP x 20 ML
    • 5% off

    This 20ml quality made solid brass bodied sight feed lubricator with clear Acrylic window will mount directly onto lubrication points via a 1/4 BSP male thread. It offers a single point lubrication option for your engine or machine that dispenses oil by gravity from a transparent reservoir through a needle valve. It is recommended for lubrication points where a supply of oil under visible control is required.

    • $33.25
    • including GST

    Not rated yet
    Only 3 left in stock
  • Brass Drip Feed Oiler/Lubricator 1/8 BSP x 20 ML
    • 5% off

    This 20ml quality made solid brass bodied sight feed lubricator with clear Acrylic window will mount directly onto lubrication points via a 1/8 BSP male thread. It offers a single point lubrication option for your engine or machine that dispenses oil by gravity from a transparent reservoir through a needle valve. It is recommended for lubrication points where a supply of oil under visible control is required.

    • $33.25
    • including GST

    Not rated yet