Lister JP, JS & JK

Brand new genuine Bosch fuel injector, modern equivalent suitable for Lister JP1, JP2, JP3 & JP4 cold start diesel engines. This high quality injector assembly comes complete with a BDL30S54 injector nozzle set to 150 ATS and a copper sealing washer. May not be suitable for some early engines, see below for more details…

New replacement old type fuel filter wick for all original Lister diesel engines fitted with this style of fuel filter. This quality aftermarket fuel filter wick complete with nipple and clamp is suitable for use in the original standard cast iron fuel filters found on Lister CS, JP, JK, FR, CE & CD engines.

 Equivalent to Lister part numbers: 023-02288, 23-2288

Genuine new old stock Lister JP, JK & JS valve push rods. These are the early style as pictured but will fit the later JP engines as the length is the same. The length is approximately 12.75”.

Genuine Lister centrifugal water pump backing plate, suitable for pumps fitted on Lister FR, JP, JW, HRW and HW engines.

Lister part number 291-38860.

Genuine Lister centrifugal water pump carbon driver, suitable for pumps fitted on Lister FR, JP, JW, HRW and HW engines.

Lister part number 291-38850.

These are genuine new old stock Lister CS and JP rubber injector sealing O-rings, Lister part number 010-03038. These are only required if you have an early CS or JP with the water cooled injector…

A very high quality made non asbestos copper laminated gasket for the exhaust flange joint on all Lister CS, L, J & JP engines.

Valve spring carrier and cone/collets suitable for a wide range of vintage Lister diesel engines, including all the CS 3-1, 3.5-1, 5-1, 6-1, 8-1, 10-2, 12-2 & 16-2 range, as well as the VA, CD, CE and JP’s. This aftermarket set includes 6 parts in total, 2 valve spring carriers (010-03130) and 2 (pair) cone/cotters (010-00325).

Sold in pairs as shown in photo.

Genuine Lister new old stock HL142S32D525P2 injector nozzles Lister P/N 394-14010. These are almost impossible to find and are no longer made.

Fuel pump delivery valve for the Lister JA6 P/N 1/367X.

Lister JP cylinder head gasket, made from copper and non-asbestos composite, equivalent to Lister P/N 8-1/C105 or 010-03105. These high quality aftermarket gaskets are suitable for 9/1, JP, JP2, JP3 & JP4.

Superb quality Bryce, CAV, Delphi, Bosch, or equivalent injector nozzle suitable for Lister JP1, JP2, JP3, JP4, JP6 & JPM models, also suitable for JK2, JK3, JK4 & JK6 models. This BDL30S54 nozzle is equivalent to Lister Part Number 616-02145.

These aftermarket precision ground Lister JP exhaust valve made from EN52 grade steel as per original specification.

Equivalent Lister part numbers: 10-3-121, 010-03121.

These aftermarket precision ground Lister JP inlet valve made from EN52 grade steel as per original specification.

Equivalent Lister part numbers: 10-3-8A, 010-03008.

Complete non-genuine piston and liner set suitable for Lister JP, JK & JS engines. The set includes piston, rings, gudgeon pin & clips, new liner and sealing rings. Equivalent to Lister part numbers 010-02247 and 573-10430.

Genuine cylinder head mounted water pump for JP 2/3/4 cylinder engines, part number 013-0020/114 or 13-20-114. These are new old stock items, extremely hard to find.

New non-genuine cylinder liners to the Lister JP, JK & JS range of engines, equivalent to Lister part number 010-02247. Comes complete the 3 sealing rubbers.

A non-genuine piston assembly to suit the Lister 9-1, JP, JK & JS range of diesel engines. The assembly includes piston, rings, gudgeon pin, and clips. Suitable for 1, 2, 3, 4, & 6 cylinder engines with cast iron liners. Please note that this assembly is not suitable for chrome liners without first changing the top chrome ring a to plain ring.

These non-genuine high quality piston ring sets are suitable for all 9/1, JP, JS & JK engines with a 4 ring alloy piston and a chrome plated cylinder liner. Note: These rings are suitable for use with genuine Lister Aluminium pistons, and compatible with chrome plated cylinder liners.

These non-genuine high quality piston ring sets are suitable for all 9/1, JP, JS & JK engines with a 4 ring alloy piston and a non-chrome cylinder liner. Note: These ring sets are suitable for use with genuine Lister Aluminium pistons, but are only compatible with non-chrome plated cylinders, the top piston ring is chrome plated for use in an unchromed liner only.

Lister JP centre bearing, genuine New Old Stock, only available in STD. Suitable for JP, JK & JS 3 & 4 cylinder engines. 3 cylinder engine require 2 sets, and 4 cylinder engine require 1 set.

For reference please see Part No11 in picture.

Lister JP cylinder head cover, genuine New Old Stock. Suitable for JP, JK & JS 1, 2, 3 & 4 cylinder engines.

Full set of 4 non-genuine valve springs suitable for all the Lister CS range of diesel engines, these spring sets will also fit the Lister JP’s and CD/CE engines. Included are 2 x inner valve springs equivalent to Lister part numbers 11-3-219 or 012-03219, and 2 x outer valve spring equivalent to Lister part numbers 10-3-129 or 012-03129.