Lister LD & SL

Genuine Lister anti-clockwise flywheel starting ring for Lister LD2, SL2, SL3, LR2, SR2, SR3, ST2 & ST3 diesel engines. Fits 2 & 3 cylinder engines only, not suitable for single cylinder engines.

New standard size cylinder and piston kit to suit the Lister LD1 & LD2 diesel engines with a 3” (76.2mm) bore. The kit comprises of the new standard size cylinder equivalent to P/N 201-10273 and a new standard size piston assembly equivalent to Lister P/N 570-10110.

Clockwise rotation flywheel starting ring suitable for Lister LD1, SL1, LR1, SR1, ST1 diesel engines. Fits single cylinder engines only, not suitable for multi-cylinder engines. Lister part number 201-12870.

A new high quality Hepolite piston assembly for Lister LD1 & LD2 engines with a 0.060” oversize bore. The assembly includes a new oversize piston, ring set to suit, a gudgeon pin and pair of circlips. These are new old stock Hepolite 0.060” oversize pistons, only available while stocks last.

Clockwise rotation flywheel starting ring suitable for Lister LD2, SL2, SL3, LR2, SR2, SR3, ST2 & ST3 diesel engines. Fits 2 & 3 cylinder engines only, not suitable for single cylinder engines. These high quality non-Genuine starting rings are equivalent to Lister 202-12870.

A new high quality non-genuine piston assembly for Lister LD1 & LD2 engines with a standard 3” bore. The assembly includes a new piston, ring set, gudgeon pin and pair of circlips. Available in standard size to suit a 3” (76.2mm) bore.

Genuine Lister fuel leak off pipe for SL3, SR3 & Early ST3 air cooled diesel engines (See notes regarding ST3 engines). Lister part number 203-17131, supersedes part number 203-81940.

New standard size cylinder to suit the Lister LD1 & LD2 engines with a 3” (76.2mm) bore. These high quality non-Genuine liners are equivalent to Lister Petter part number 201-10273.

New Lister SL cylinder barrel, suitable for all air cooled Lister SL1, SL2, SL3 & SL4 engines with an 80.96mm bore. These high quality non-genuine cylinders are equivalent to Lister Petter part number 201-17520.

High quality Lister SL3 diesel engine full overhaul gasket set, these aftermarket gaskets sets are equivalent to Lister P/N 657-10095. For air cooled SL3 engines made between 1959 - 1966.

A well-made 5 Litres (1 Gallon) Fuel tank equivalent to Lister-Petter part number 201-11283. This is typically an engine mounted tank commonly found on LD1, SL1, LR1, SR1 engine, and some LD2, SL2, LR2, SR2 and ST1 engines. Equivalent to Lister P/N 201-11283.

Lister LR, SR & LD, SL cylinder head cover assembly suitable for 1, 2 & 3 cylinder engines. The assembly comes complete with filler cap and decompression leaver fitted. Lister part number 201-17423, will also replace and supersedes 201-17420.

High quality Lister LD2 two cylinder engine full overhaul gasket sets, these aftermarket gaskets sets are equivalent to Lister P/N 657-10053. For air cooled LD2 engines made between 1957 - 1966.

Genuine Lister phosphor bronze camshaft bush (Flywheel End) suitable for Lister LD, SL, LR, SR & SW engines. Lister part number 201-10190.

Sold Individually

Oil pressure gauge, 0-6 Bar (0-100 PSI), suitable for Lister JP, CD, CE, LD, SL, HA, HB, LR, SR, SW, ST, STW, HR, HRW, TX, TS, TL & TR. These new high quality stainless steel gauges are a suitable replacement for Lister Petter part number 351-15160. Gauge face measures approximately 50mm or 2”, with a bottom fitting ¼” BSPP thread, Glycerine filled.

Genuine Lister lubricating oil relief valve assembly, suitable for Lister SL3, SR3, *ST2 & *ST3 (See Notes Regarding: ST2 & ST3). Lister part number 570-11071, supersedes 570-11070 & 203-12541.

High quality Lister SL1 diesel engine full overhaul gasket set, these aftermarket gaskets sets are equivalent to Lister P/N 657-10033. For air cooled SL1 engines made between 1961 - 1966.

Genuine Lister fuel pump tappet assembly for LD, SL, LR, SR, SW, ST, STW, HA, HB, HW, HR, HRW diesel engines. Lister part number 570-10030.

A high quality cast iron replacement starting handle suitable for most Lister engines requiring a 1.5" crank starting handle with a ratchet pin that engages from the crank’s keyway. Will fit most Lister A & B Juniors, HR, HRW, LD, LR, SL, SR, ST, and SW. Equivalent to Lister part number 201-12510.

Fuel lift pump suitable for replacing Lister Petter part numbers 351-12150, 329-24810, 329-62200, 572-71980. This type of lift pump is fitted to many Lister Petter diesel engines including the SL2/3, HA2/3, HB2/3, HR2/3, SR, ST & STW models.

High quality Lister LD1 full overhaul gasket set, these aftermarket gaskets sets are equivalent to Lister P/N 657-10013. For air cooled single cylinder LD engines made between 1956 - 1966.

Genuine Lister lubricating oil relief valve assembly, suitable for Lister LD1, LD2, SL1, SL2, LR1, LR2, SR1, SR2 & *ST1 (See Notes Regarding: ST1). Lister part number 570-11061, supersedes 570-11060.

Genuine Lister SL & LD main bearing, part number 201-10063 (STD).

A good quality reproduction exhaust silencer for Lister LD1 & LR1 engines. These silencers have internal baffles for effective exhaust note silencing.

A high-quality reproduction exhaust silencer for Lister ST1, SR1, LD2 & LR2 engines. These silencers are a copy of the original Lister type, made to original Lister specification, with internal baffles for effective exhaust note silencing.

Genuine Lister LD & SL crankshaft oil seal housing, suitable for reverse rotation engines only.
Lister part number 201-12630.

Genuine Lister valve rocker lever complete with bush for LD1, LD2, SL1, SL2 & SL3 (Early Type). Lister part number 201-10291 (Lever) & 291-20700/1 (Bush). See notes for these early LD & SL engines.

Genuine bronze camshaft bush for the gear end on Lister SL4 & SR4 diesel engines. These bushes are only suitable for the gear end on 4 cylinder SL & SR engines.

A genuine Lister Petter aluminium injector sleeve suitable for all LD & SL models, Lister part number 201-10938.

Genuine Lister SL oil suction valve assembly for 1 and 2 cylinder engines, lister part number 570-10071.

Phosphor bronze crankcase end cover bush suitable for Lister LD, SL, LR, SR & ST engines. This non-genuine bush is equivalent to Lister part number Lister 201-10171.

Sold Individually

Genuine Lister valve rocker lever complete with bush for LD1, LD2, SL1, SL2 & SL3 (Late Type) and all LR1 & LR2 engines. Lister part number 201-19370 (Lever) & 291-20701 (Bush). See notes for early LD & SL engines.

Phosphor bronze camshaft bush (Gear End) suitable for Lister LD, SL, LR, SR & ST engines. This non-genuine bush is equivalent to Lister part number Lister 201-10181.

Sold Individually

Later type aftermarket cartridge fuel filter being a suitable replacement for the assembly found on many Lister Petter engines. This standard AD600 type filter comes complete fitted with the ACD60 paper element P/N 201-13118. Suitable for Lister LD, SL, LR, SR, ST1, ST2, LPA, LPW, LPWS, VA and Later CS 8-1 & 16-2 engines. Also found on many Petter engines.

CAV, Lucas, Bryce or OEM Equivalent injector nozzle for Lister LD1, LD2, SL1, SL2, SL3 & SLMG models. This BDN12SD12 nozzle is equivalent to Lister Part Number 201-12060.

Genuine Lister Petter, Lucas, Bryce or OEM Equivalent fuel pump plunger and element suitable for fuel pumps on Lister LD, LR and SL diesel engines. This 7032-26A element is equivalent to Lister part number 660-10020.

Pair of new fuel tank straps for the smaller 5 Litre (1 Gallon) tanks fitted to Lister LD1, SL1, LR1, SR1 & ST1. These newly made aftermarket straps are made to fit our new 1 Gallon tanks, equivalent to 570-10630, but may not be suitable for some original tanks.

Sold as a pair, 2 x strap assemblies included (As Shown in Photo).

Genuine Lister LD, SL & LR inlet valve rocker bracket, part number 201-10533. Suitable for Inlet side only.