Lister LD & SL

Later type aftermarket cartridge fuel filter being a suitable replacement for the assembly found on many Lister Petter engines. This standard AD600 type filter comes complete fitted with the ACD60 paper element P/N 201-13118. Suitable for Lister LD, SL, LR, SR, ST1, ST2, LPA, LPW, LPWS, VA and Later CS 8-1 & 16-2 engines. Also found on many Petter engines.

High quality Lister SL1 diesel engine full overhaul gasket set, these aftermarket gaskets sets are equivalent to Lister P/N 657-10033. For air cooled SL1 engines made between 1961 - 1966.

Genuine Lister FR, LD & SL valve springs (Outer & Inner), Lister part number for the double springs 571-10830, or 291-20641 for Outer Spring & 291-20651 for Inner Spring.

Sold as 1 set, includes 1 x outer spring & 1 x inner spring.

Lister LD, SL, LR, SR & ST fuel pump housing joint to top plate, equivalent to Lister part number 201-11413.

Sold Individually

Cylinder head stud (short) suitable for all Lister ST, LR, SR, LD & SL diesel engines, fits all single and multi-cylinder engines in these models. A high quality non-genuine part equivalent to Lister part number 201-11052.

Sold Individually

Genuine Lister LD, LR, SL, SR, ST & STW governor lever, suitable for 1 & 2 cylinder engines only. Lister part number 201-10842.

Genuine Lister new old stock injector clamp for Lister LD, SL, LR, SR, SW, ST, STW, HA, HB, HW, HR, HRW engines, part number 351-10580.

Genuine Lister Petter, Lucas, Bryce or OEM Equivalent fuel pump plunger and element suitable for fuel pumps on Lister LD, LR and SL diesel engines. This 7032-26A element is equivalent to Lister part number 660-10020.

Genuine Lister Petter LD, SL, SR, SW, ST, STW, HR & HRW lubricating oil pipe tee to rocker bracket pipe. Sold Individually.

Lister part number 201-11652.

Pair of crankshaft thrust washers to fit all Lister Petter LD, SL, LR, SR, SW, LT and LV engines from one to three cylinders. There are 2 trust washers in each engine, this set contains 2, enough washers for 1 engine.

Equivalent to Lister Petter part number: 201-12380 x2

Genuine bronze camshaft bush for the gear end on Lister SL4 & SR4 diesel engines. These bushes are only suitable for the gear end on 4 cylinder SL & SR engines.

A new high quality Hepolite piston assembly for Lister LD1 & LD2 engines with a 0.060” oversize bore. The assembly includes a new oversize piston, ring set to suit, a gudgeon pin and pair of circlips. These are new old stock Hepolite 0.060” oversize pistons, only available while stocks last.

Genuine Lister SR, LR, LD, SL, ST & STW, lubricating oil strainer spring, Lister part number 291-21950.

Genuine Lister LD, LR, SL, SR, ST governor wire link, part number 366-04964.

Genuine Lister SL cylinder head shim, suitable for SL1, SL2, SL3 & SL4, Lister part number 201-17540. The shim is 0.003” thick, use as many or as few as you need in combination with the head gasket to set the correct cylinder head bump clearance.

Sold Individually.

Fuel filter element suitable for a wide range of Lister Petter engines fitted with the AC Delco AD600 type filter, including the LT, LV, TS, TR, AC, LD, LR, SR & ST range, also found on the later CS 8/1, 16/2 slow speed engines. Equivalent to Lister Patter part number 201-13118.

High quality Lister SL3 diesel engine full overhaul gasket set, these aftermarket gaskets sets are equivalent to Lister P/N 657-10095. For air cooled SL3 engines made between 1959 - 1966.

Clockwise rotation flywheel starting ring suitable for Lister LD2, SL2, SL3, LR2, SR2, SR3, ST2 & ST3 diesel engines. Fits 2 & 3 cylinder engines only, not suitable for single cylinder engines. These high quality non-Genuine starting rings are equivalent to Lister 202-12870.

Genuine Lister LD. SL, LR, SR, ST, HA, HB, HR breather assembly, part number 201-10982.

Governor weight spring suitable for Lister ST, LR, SR, SL diesel engines. Important: NOT suitable for all engine speeds, see further details below on this page for compatible engines. This non-genuine part is equivalent to Lister part number 201-10820.

Sold Individually

New precision made gudgeon pin suitable for Lister LD1, LD2, LR1 & LR2 engines, this high quality non-Genuine part is equivalent to Lister part number 201-10090.

Genuine Lister lubricating oil relief valve assembly, suitable for Lister LD1, LD2, SL1, SL2, LR1, LR2, SR1, SR2 & *ST1 (See Notes Regarding: ST1). Lister part number 570-11061, supersedes 570-11060.

New Lister SL cylinder barrel, suitable for all air cooled Lister SL1, SL2, SL3 & SL4 engines with an 80.96mm bore. These high quality non-genuine cylinders are equivalent to Lister Petter part number 201-17520.

Genuine Lister decompressor lever 351-13550, early brass type, these were later replace by the aluminium type 351-13551, both are interchangeable. Originally fitted to Lister LD, SL, HA, HB and will also fit LR, SR, ST, STW, HR, HRW.

High quality Lister SL2 diesel engine full overhaul gasket set, these aftermarket gaskets sets are equivalent to Lister P/N 657-10074. For air cooled SL2 engines made between 1961 - 1966.

Gromet for leak off pipe (Fuel Tank End) on Lister LD, SL, LR, SR, ST fuel tanks where fitted. This rubber gromet is equivalent to Lister part number 201-11710. For reference, gromet is item #10 in photo.

A new high quality non-genuine piston assembly for Lister LD1 & LD2 engines with a standard 3” bore. The assembly includes a new piston, ring set, gudgeon pin and pair of circlips. Available in standard size to suit a 3” (76.2mm) bore.

Fuel lift pump suitable for replacing Lister Petter part numbers 351-12150, 329-24810, 329-62200, 572-71980. This type of lift pump is fitted to many Lister Petter diesel engines including the SL2/3, HA2/3, HB2/3, HR2/3, SR, ST & STW models.

Genuine Lister swivel union plug (Brass), Lister part number 201-15400. Used on the fuel system of many Lister models including the LD, SL, LR, SR, ST and others.

Oil level dipstick for Lister LD1, SL1, LR1, SR1 & ST1 diesel engines where fitted to crankcase door (Identification Mark 17, refer to parts book to verify). This non-genuine aftermarket dipstick is equivalent to Lister part number 570-10211.  

A genuine Lister Petter aluminium injector sleeve suitable for all LD & SL models, Lister part number 201-10938.

Fuel injector oil seal O ring suitable for Lister LD, SL, LR, SR, HA & HB diesel engines, equivalent to Lister part number 201-11080.

Sold Individually

New fuel pipe for connecting between the fuel tank and fuel filter body on Lister LD1, LD2, SL1, SL2, SL3, LR1, LR2, SR1 & SR2 engines. This high quality aftermarket copper pipe is equivalent to Lister part number 201-11674.

Lister LD, SL, LR & SR cylinder head nut washer, also used in various other applications on a number of other Lister Petter engines, including but not limited to starter motor nut washers on some models etc. Lister part number 027-00545.

Sold Individually.

Genuine Lister SL oil suction valve assembly for 1 and 2 cylinder engines, lister part number 570-10071.

Genuine Lister fuel leak off pipe for SL3, SR3 & Early ST3 air cooled diesel engines (See notes regarding ST3 engines). Lister part number 203-17131, supersedes part number 203-81940.

A good quality reproduction exhaust silencer for Lister LD1 & LR1 engines. These silencers have internal baffles for effective exhaust note silencing.