Lister ST & STW

Genuine Lister lubricating oil relief valve assembly, suitable for Lister SL3, SR3, *ST2 & *ST3 (See Notes Regarding: ST2 & ST3). Lister part number 570-11071, supersedes 570-11070 & 203-12541.

Lister LD, SL, LR, SR, ST, HA, HB, HW decompression lever shaft assembly suitable for 1, 2 & 3 cylinder engines. Equivalent to Lister part numbers 201-10950 (Shaft), 201-10960 (Screw) & 270-00002 (Nut).

Decompressor lever, later aluminium type equivalent to Lister Petter 351-13551, commonly fitted to Lister LR, SR, ST, STW, HR & HRW. These well-made non-Genuine decomp levers are Nikel plated and come complete with a mills pin for fitting.

Swivel union plug (Banjo Bolt) used for connecting the fuel pipes to CAV fuel filters on Lister Petter HA, HB, ST, HR, TS, TR, LPW, LPW, JA, HW and others. This 1/2″ - 20 UNF steel swivel union plug is equivalent to Lister Petter part number 354-28380. See item 66 in illustration for fitting location and filter type this plug is suitable for.

Clockwise rotation flywheel starting ring suitable for Lister LD1, SL1, LR1, SR1, ST1 diesel engines. Fits single cylinder engines only, not suitable for multi-cylinder engines. Lister part number 201-12870.

Fuel injector leak off pipe suitable for Lister ST2, LR2 & SR2, a well-made non-Genuine assembly equivalent to Lister part number 202-17131.

Swivel union plug (Banjo Bolt) used on the fuel system of many Lister engines including LD, SL LR, SR, ST, HA, HB, HR, CS, LPA, LPW, TS, TR. These are quality made 1/4” BSP non-Genuine banjo bolts equivalent to Lister part number 201-15400 (Steel).

Thermostat suitable for Lister STW, HRW, SW, HW, JW, Early LPW engines requiring a 74 degree thermostat. Equivalent to Lister part number 354-44070, replaces 010-02290, 331511, 354-44072, 354-44071.  For suitability, see notes below or refer to your service manual. If in doubt, please ask before purchasing.

Oil pressure gauge, 0-6 Bar (0-100 PSI), suitable for Lister JP, CD, CE, LD, SL, HA, HB, LR, SR, SW, ST, STW, HR, HRW, TX, TS, TL & TR. These new high quality stainless steel gauges are a suitable replacement for Lister Petter part number 351-15160. Gauge face measures approximately 50mm or 2”, with a bottom fitting ¼” BSPP thread, Glycerine filled.

New piston assembly & cylinder barrel kit suitable for Lister Petter ST1, ST2 & ST3 air cooled diesel engines. These high quality non-genuine pistons and cylinders are equivalent to Lister Petter Barrel/Piston kit part number 570-35520.

Genuine Lister fuel pump tappet cap for LD, SL, LR, SR, ST & STW diesel engines, Lister part number 201-11440. Refer to image 2 for location of this item.

Sold Individually.

Genuine Lister Petter STW fuel pipe, pump to injector. Part number 201-90470.

Fuel filler cap joint suitable for fuel tank lids fitted to many Lister Petter fuel tanks, including LD, SL, LR, SR, ST and early LT, LV, TX, TL, TS & TR tanks fitted with the 366-00091 style filler cap.  Equivalent to Lister Petter part number 027-06151.

Oil filler cap joint suitable for the oil filler caps fitted to Lister FR, LD, SL, HA, HB, LR, SR, ST, LT, LV, HR, HL, JA, JW, TX, TL, TS, TR. Equivalent to Lister Petter part number 303-00253.

Genuine Lister Ferrule Joint Ring for Lister HRW, STW, SW, HW & JW engines, part number 351-40130. This cylinder head joint ring is used for sealing the water passages between the cylinder barrel and cylinder head on a wide range of water cooled Lister diesel engines.

Exhaust manifold flange & exhaust joint used on many Lister Petter SR, ST, TL, TS, TR, TX, LPA & LPW engines, equivalent to Lister Petter 366-01287, supersedes 757-15750.

Fuel pump housing door gasket suitable for Lister LD1, SL1, LR1, SR1, SW1 & ST1, equivalent to Lister part number 201-11581.

Genuine Lister STW cylinder base gasket, suitable for STW2 & STW3 water cooled diesel engines only, Lister part number 201-90541.

Sold Individually

Genuine Lister STW cylinder head shims, suitable for STW2 & STW3 water cooled diesel engines only. Lister part numbers 201-90140. The shim is 0.003” thick, use as many or as few as you need in combination with the head gasket to set the correct cylinder head bump clearance.

Sold Individually.

Genuine Lister STW cylinder head gasket, suitable for STW2 & STW3 water cooled diesel engines only. Lister part number 201-90030.

Sold Individually

Genuine Lister ST cylinder base gasket, suitable for ST1, ST2 & ST3 air cooled diesel engines, Lister part number 201-80170.

Genuine Lister Petter ST & TS cylinder head gasket, suitable for ST1, ST2, ST3, TS1, TS2 & TS3 air cooled diesel engines. Lister part number 201-80210.

Genuine Lister STW valve rocker lever assembly, suitable for water cooled Lister STW2 & STW3 diesel engines only. Lister part number 570-13560.

Genuine Lister new old stock injector clamp for Lister LD, SL, LR, SR, SW, ST, STW, HA, HB, HW, HR, HRW engines, part number 351-10580.

Genuine Lister decompressor lever 351-13550, early brass type, these were later replace by the aluminium type 351-13551, both are interchangeable. Originally fitted to Lister LD, SL, HA, HB and will also fit LR, SR, ST, STW, HR, HRW.

Genuine Lister fuel leak off pipe for SL3, SR3 & Early ST3 air cooled diesel engines (See notes regarding ST3 engines). Lister part number 203-17131, supersedes part number 203-81940.

Genuine Lister Petter oil filler neck 027-06317, used on many Lister engines including LD, SL, LR, SR, HA, HB, HW, ST, STW, HR, HRW, TS, TL & TR. Supersedes 027-03821 & 27-3821.

Genuine new old stock Lister fuel tank filler cap suitable for Lister LD, SL, LR, SR, ST, LT, LV, TS & TR engine mounted fuel tanks. This bayonet style filler cap is the later “non-spill” type, Lister part number 366-00091, comes complete with the 027-06151 joint.

Clockwise rotation flywheel starting ring suitable for Lister LD2, SL2, SL3, LR2, SR2, SR3, ST2 & ST3 diesel engines. Fits 2 & 3 cylinder engines only, not suitable for single cylinder engines. These high quality non-Genuine starting rings are equivalent to Lister 202-12870.

Oil level dipstick for Lister LD1, SL1, LR1, SR1 & ST1 diesel engines where fitted to crankcase door (Identification Mark 17, refer to parts book to verify). This non-genuine aftermarket dipstick is equivalent to Lister part number 570-10211.  

Oil level dipstick for Lister LD2, SL2, LR2, SR2 & ST2 diesel engine where fitted to crankcase door with lift pump and oil filter (Identification Mark 19, refer to parts book to verify). This non-genuine aftermarket dipstick is equivalent to Lister part number 570-10390.

Fuel pump delivery valve holder suitable for CAV, PYROX, Bryce & Bosch PF1A & BPF1A type fuel injector pumps. Genuine CAV, part number 7033-97. Used on a wide range of Lister air cooled engines.

Exhaust/Intake manifold joint suitable for Lister ST & STW engines, this non-Genuine gasket is equivalent to Lister part number 201-80660.

Injector washer suitable for Lister Petter ST, HR, TS, TR & TL, equivalent to Lister part number 351-40230.

Sold Individually.

Genuine Lister Petter inlet & exhaust manifold clamping washer for ST2, ST3, TS2, TS3, TR2 & TR3 were fitted. Also used as spacer washer on TS1 fuel filter bracket & 8.25 litre fuel tank mounting.

Genuine Lister Petter temperature gauge with 6 foot capillary, suitable for a wide range of Lister Petter air cooled diesel engines, including ST, HR, TS, TR, TX, TL, LT & LV. Will also replace 370-12991 & 370-12992.

Gromet for leak off pipe (Fuel Tank End) on Lister LD, SL, LR, SR, ST fuel tanks where fitted. This rubber gromet is equivalent to Lister part number 201-11710. For reference, gromet is item #10 in photo.

Genuine Lister anti-clockwise flywheel starting ring for Lister LD2, SL2, SL3, LR2, SR2, SR3, ST2 & ST3 diesel engines. Fits 2 & 3 cylinder engines only, not suitable for single cylinder engines.

New Lister ST cylinder head suitable for all ST 1, 2 & 3 cylinders air cooled diesel engines. This is bare cylinder head with valve seat inserts fitted only, does NOT include top plate, valves, or guides.

New non-genuine valve spring carrier suitable for Lister Petter ST, TR, TR diesel engines. Equivalent to Lister Petter part number 201-80230.

Sold Individually

Valve rocker bracket (Exhaust Side) suitable for Lister ST1, ST2 & ST3 diesel engines. This is a non-genuine part equivalent to Lister Petter part number 201-80350.

Sold Individually (Clip Not Included)

Valve rocker bracket (Inlet Side) suitable for Lister ST1, ST2 & ST3 diesel engines. This is a non-genuine part equivalent to Lister Petter part number 201-80340.

Sold Individually (Clip Not Included)

Rocker lever assembly to suit Lister Petter ST1, ST2 & ST3 air cooled diesel engines, comes complete with bush, adjusting screw and locknut. Equivalent to Lister part numbers 570-13570, comes complete with adjusting screw and lock nut.

Sold Individually

Fuel filter assembly complete with CAV Delphi type HDF296 filter element, these filter assemblies can be found on Lister Petter ST, TS TR & HR models where this type of fuel filter was fitted, both inlet and out threads are 1/2"x20UNF. This non-genuine aftermarket assembly is equivalent to Lister Petter part number 354-28360.

Cylinder head stud (long) suitable for all Lister ST, LR, SR, LD & SL diesel engines, fits all single and multi-cylinder engines in these models. A high quality non-genuine part equivalent to Lister part number 201-11042. This longer stud comes complete with female threaded end to accept rocker cover stud.

Sold Individually

Cylinder head stud (short) suitable for all Lister ST, LR, SR, LD & SL diesel engines, fits all single and multi-cylinder engines in these models. A high quality non-genuine part equivalent to Lister part number 201-11052.

Sold Individually