Lister ST & STW

Genuine Lister anti-clockwise flywheel starting ring for Lister LD2, SL2, SL3, LR2, SR2, SR3, ST2 & ST3 diesel engines. Fits 2 & 3 cylinder engines only, not suitable for single cylinder engines.

New Lister ST cylinder head suitable for all ST 1, 2 & 3 cylinders air cooled diesel engines. This is bare cylinder head with valve seat inserts fitted only, does NOT include top plate, valves, or guides.

New piston assembly & cylinder barrel kit suitable for Lister Petter ST1, ST2 & ST3 air cooled diesel engines. These high quality non-genuine pistons and cylinders are equivalent to Lister Petter Barrel/Piston kit part number 570-35520.

New non-Genuine cast iron exhaust manifold assembly to suit Lister ST3 engines. The assembly includes a blanking plate and threaded horizontal adaptor flange to accept 1-1/2” BSP silencer.

Genuine Lister Petter temperature gauge with 6 foot capillary, suitable for a wide range of Lister Petter air cooled diesel engines, including ST, HR, TS, TR, TX, TL, LT & LV. Will also replace 370-12991 & 370-12992.

Clockwise rotation flywheel starting ring suitable for Lister LD1, SL1, LR1, SR1, ST1 diesel engines. Fits single cylinder engines only, not suitable for multi-cylinder engines. Lister part number 201-12870.

Clockwise rotation flywheel starting ring suitable for Lister LD2, SL2, SL3, LR2, SR2, SR3, ST2 & ST3 diesel engines. Fits 2 & 3 cylinder engines only, not suitable for single cylinder engines. These high quality non-Genuine starting rings are equivalent to Lister 202-12870.

New Lister Petter ST cylinder liner, suitable for ST1, ST2 and ST3 engines. These high quality non-genuine liners are equivalent to Lister Petter part number 201-80061.

Genuine Lister fuel leak off pipe for SL3, SR3 & Early ST3 air cooled diesel engines (See notes regarding ST3 engines). Lister part number 203-17131, supersedes part number 203-81940.

Phosphor bronze camshaft bush set suitable for Lister ST3 engines. This non-genuine bush set is equivalent to and includes Lister part numbers 201-10171 x 1, 201-10181 x 1, 201-80270 x 1 & 202-12030 x 2.

Phosphor bronze camshaft bush set suitable for Lister ST2 engines. This non-genuine bush set is equivalent to and includes Lister part numbers 201-10171 x 1, 201-10181 x 1, 201-80270 x 1 & 202-12030 x 1.

Genuine Lister ST1, ST2 & ST3 couple plate for the flexible coupling assembly, this is the couple plate only, part number 202-80960.

A new non-genuine connecting rod to suit all Lister Petter ST engines, including the ST1, ST2 & ST3. The assembly comes compete with con rod bolts and small end bush fitted, big end bearing will need to be purchased separately.

Equivalent to Lister Petter part number 570-13001.

A well-made 5 Litres (1 Gallon) Fuel tank equivalent to Lister-Petter part number 201-11283. This is typically an engine mounted tank commonly found on LD1, SL1, LR1, SR1 engine, and some LD2, SL2, LR2, SR2 and ST1 engines. Equivalent to Lister P/N 201-11283.

High quality Lister ST3 three-cylinder engine full overhaul gasket sets, these aftermarket and genuine (when available) gaskets sets are equivalent to Lister P/N 657-23557. For air cooled 3-cylinder engines made between 1972 to 1983.

Phosphor bronze camshaft bush set suitable for Lister ST1 engines. This non-genuine bush set is equivalent to and includes Lister part numbers 201-10171 x 1, 201-10181 x 1 & 201-80270 x 1.

Genuine Lister Petter STW fuel pipe, pump to injector. Part number 201-90470.

Genuine Lister STW valve rocker lever assembly, suitable for water cooled Lister STW2 & STW3 diesel engines only. Lister part number 570-13560.

New Air Filter Assembly complete with filter element suitable for various Lister Petter models including the ST1 & ST2, may also be suitable for the TS, TR 1 and 2 cylinder range and could also be adapted to other Lister models with a pipe reducer.

Oil pressure gauge, 0-6 Bar (0-100 PSI), suitable for Lister JP, CD, CE, LD, SL, HA, HB, LR, SR, SW, ST, STW, HR, HRW, TX, TS, TL & TR. These new high quality stainless steel gauges are a suitable replacement for Lister Petter part number 351-15160. Gauge face measures approximately 50mm or 2”, with a bottom fitting ¼” BSPP thread, Glycerine filled.

Genuine Lister lubricating oil relief valve assembly, suitable for Lister SL3, SR3, *ST2 & *ST3 (See Notes Regarding: ST2 & ST3). Lister part number 570-11071, supersedes 570-11070 & 203-12541.

Genuine Lister fuel pump tappet assembly for LD, SL, LR, SR, SW, ST, STW, HA, HB, HW, HR, HRW diesel engines. Lister part number 570-10030.

Fuel injector leak off pipe suitable for Lister ST2, LR2 & SR2, a well-made non-Genuine assembly equivalent to Lister part number 202-17131.

New replacement oil pump kit suitable for Lister ST2, ST3, STW2 & STW3 engines. This non-genuine kit is equivalent to Lister part number 657-31390.

A high quality cast iron replacement starting handle suitable for most Lister engines requiring a 1.5" crank starting handle with a ratchet pin that engages from the crank’s keyway. Will fit most Lister A & B Juniors, HR, HRW, LD, LR, SL, SR, ST, and SW. Equivalent to Lister part number 201-12510.

Fuel lift pump suitable for replacing Lister Petter part numbers 351-12150, 329-24810, 329-62200, 572-71980. This type of lift pump is fitted to many Lister Petter diesel engines including the SL2/3, HA2/3, HB2/3, HR2/3, SR, ST & STW models.

High quality Lister ST3 three-cylinder engine top end/decoke gasket sets, these gaskets sets are equivalent to Lister P/N 657-23541. For air cooled 3-cylinder ST engines made between 1972 to 1983.

Genuine Lister lubricating oil relief valve assembly, suitable for Lister LD1, LD2, SL1, SL2, LR1, LR2, SR1, SR2 & *ST1 (See Notes Regarding: ST1). Lister part number 570-11061, supersedes 570-11060.

A high-quality reproduction exhaust silencer for Lister ST1, SR1, LD2 & LR2 engines. These silencers are a copy of the original Lister type, made to original Lister specification, with internal baffles for effective exhaust note silencing.

Fuel filter assembly complete with CAV Delphi type HDF296 filter element, these filter assemblies can be found on Lister Petter ST, TS TR & HR models where this type of fuel filter was fitted, both inlet and out threads are 1/2"x20UNF. This non-genuine aftermarket assembly is equivalent to Lister Petter part number 354-28360.

Starter motor distance piece suitable for Lister ST2, ST3, LR2, SR2 & SR3 engines. This non-Genuine part is equivalent to Lister part number 202-26550.

Crankshaft oil retaining ring suitable for ST1, ST2 & ST2 Clockwise Rotation engines, this high quality non-genuine part is equivalent to Lister Petter part number 201-80140.

High quality Lister ST2 two-cylinder engine top end/decoke gasket sets, these gaskets sets are equivalent to Lister P/N 657-23523. For air cooled 2-cylinder ST engines made between 1972 to 1983.

Other Lister part numbers for this set: 657-23520, 657-23521, 657-23522, 657-23523.

Phosphor bronze crankcase end cover bush suitable for Lister LD, SL, LR, SR & ST engines. This non-genuine bush is equivalent to Lister part number Lister 201-10171.

Sold Individually

Genuine Lister ST1 injector leak of pipe, part number 201-81922.

High quality Lister ST1 single cylinder engine De-coke or top gasket sets, these aftermarket and genuine (when available) gaskets sets are equivalent to Lister P/N 657-23503. For air cooled single cylinder engines made between 1975 - 1985.

Lucas or equivalent 1-315 fuel pump element for CAV BPF and Bryce pumps fitted to Lister ST and STW engines. Equivalent to Lister Petter part number 660-13760.

Thermostat suitable for Lister STW, HRW, SW, HW, JW, Early LPW engines requiring a 74 degree thermostat. Equivalent to Lister part number 354-44070, replaces 010-02290, 331511, 354-44072, 354-44071.  For suitability, see notes below or refer to your service manual. If in doubt, please ask before purchasing.