Lister ST & STW

Later type aftermarket cartridge fuel filter being a suitable replacement for the assembly found on many Lister Petter engines. This standard AD600 type filter comes complete fitted with the ACD60 paper element P/N 201-13118. Suitable for Lister LD, SL, LR, SR, ST1, ST2, LPA, LPW, LPWS, VA and Later CS 8-1 & 16-2 engines. Also found on many Petter engines.

Pair of new fuel tank straps for the smaller 5 Litre (1 Gallon) tanks fitted to Lister LD1, SL1, LR1, SR1 & ST1. These newly made aftermarket straps are made to fit our new 1 Gallon tanks, equivalent to 570-10630, but may not be suitable for some original tanks.

Sold as a pair, 2 x strap assemblies included (As Shown in Photo).

Genuine Lister STW valve rocker lever assembly, suitable for water cooled Lister STW2 & STW3 diesel engines only. Lister part number 570-13560.

A high quality cast iron replacement starting handle suitable for most Lister engines requiring a 1.5" crank starting handle with a ratchet pin that engages from the crank’s keyway. Will fit most Lister A & B Juniors, HR, HRW, LD, LR, SL, SR, ST, and SW. Equivalent to Lister part number 201-12510.

Phosphor bronze camshaft bush set suitable for Lister ST3 engines. This non-genuine bush set is equivalent to and includes Lister part numbers 201-10171 x 1, 201-10181 x 1, 201-80270 x 1 & 202-12030 x 2.

Gromet for leak off pipe (Fuel Tank End) on Lister LD, SL, LR, SR, ST fuel tanks where fitted. This rubber gromet is equivalent to Lister part number 201-11710. For reference, gromet is item #10 in photo.

Lister LD, SL, LR, SR, ST, HA, HB, HW decompression lever shaft assembly suitable for 1, 2 & 3 cylinder engines. Equivalent to Lister part numbers 201-10950 (Shaft), 201-10960 (Screw) & 270-00002 (Nut).

Genuine Lister copper washer found used on oil line fittings and other pipping connection for Lister ST, HA, HB, HR, and others. Lister part number 291-30640, also replaces P/N 103-91. Sold Individually.

Dimensions: 26.50mm ID x 33.25 O.D. x 1.6mm Thick.

Blanking flange for the exhaust manifolds (202-82590 & 203-81251) fitted to Lister ST2 & ST3 engines. Newly made non-Genuine part equivalent to Lister Petter part number 202-82391.

Genuine Lister STW cylinder base gasket, suitable for STW2 & STW3 water cooled diesel engines only, Lister part number 201-90541.

Sold Individually

A high quality OEM equivalent 1/338 fuel pump delivery valve equivalent to Lister Petter part number 660-11050, suitable for use in Lister LR, SR, ST, HA2, HA3, HB2, HB3 and LT1 engines Builds 1-7.

Oil level dipstick for Lister LD1, SL1, LR1, SR1 & ST1 diesel engines where fitted to crankcase door (Identification Mark 17, refer to parts book to verify). This non-genuine aftermarket dipstick is equivalent to Lister part number 570-10211.  

Genuine Lister lubricating oil relief valve assembly, suitable for Lister LD1, LD2, SL1, SL2, LR1, LR2, SR1, SR2 & *ST1 (See Notes Regarding: ST1). Lister part number 570-11061, supersedes 570-11060.

Genuine Lister fuel pump tappet guide to suit a wide range of Lister diesels including the LD, SL, LR, SR, ST, STW and HR range of engines. Lister part number 201-11471.

Fuel filter assembly complete with CAV Delphi type HDF296 filter element, these filter assemblies can be found on Lister Petter ST, TS TR & HR models where this type of fuel filter was fitted, both inlet and out threads are 1/2"x20UNF. This non-genuine aftermarket assembly is equivalent to Lister Petter part number 354-28360.

Genuine Lister Petter STW fuel pipe, pump to injector. Part number 201-90470.

Fuel injector oil seal ring suitable for Lister Petter ST & HR diesel engines, equivalent to Lister part number 351-51540.

Sold Individually

Genuine Lister new old stock injector clamp for Lister LD, SL, LR, SR, SW, ST, STW, HA, HB, HW, HR, HRW engines, part number 351-10580.

New Air Filter Assembly complete with filter element suitable for various Lister Petter models including the ST1 & ST2, may also be suitable for the TS, TR 1 and 2 cylinder range and could also be adapted to other Lister models with a pipe reducer.

Crankshaft oil retaining ring felt suitable for Lister ST1, ST2 & ST3 diesel engines, equivalent to Lister part number 201-80281.

Genuine Lister anti-clockwise flywheel starting ring for Lister LD2, SL2, SL3, LR2, SR2, SR3, ST2 & ST3 diesel engines. Fits 2 & 3 cylinder engines only, not suitable for single cylinder engines.

Decompressor lever, later aluminium type equivalent to Lister Petter 351-13551, commonly fitted to Lister LR, SR, ST, STW, HR & HRW. These well-made non-Genuine decomp levers are Nikel plated and come complete with a mills pin for fitting.

HDF296 type diesel filter element, suitable for ST3, TS, TL, TR, HA, HB, HS, HR, HRW, HRWS, HL, HLT, JA, JAS, JW, JWS, JWSC fitted with filter housing 354-28360. Note: For HA2/3 from engine numbers 3295HA212, 2294HA312. Equivalent to Lister Petter part number 351-29760.

Exhaust Manifold Adaptor Flange 1-1/4" Outlet for Lister Petter ST2 engines. This non-Genuine part is equivalent to Lister Petter part number 202-81660.

Genuine Lister STW cylinder head shims, suitable for STW2 & STW3 water cooled diesel engines only. Lister part numbers 201-90140. The shim is 0.003” thick, use as many or as few as you need in combination with the head gasket to set the correct cylinder head bump clearance.

Sold Individually.

Lister Petter ST, TS, TR, SR valve collets or pair of cotter, Lister part number 201-50921, this part number replaces 201-50920.

Phosphor bronze camshaft bush (Gear End) suitable for Lister LD, SL, LR, SR & ST engines. This non-genuine bush is equivalent to Lister part number Lister 201-10181.

Sold Individually

Fuel pump delivery valve holder suitable for CAV, PYROX, Bryce & Bosch PF1A & BPF1A type fuel injector pumps. Genuine CAV, part number 7033-97. Used on a wide range of Lister air cooled engines.

Lister LD, SL, LR, SR & ST fuel pump housing joint to top plate, equivalent to Lister part number 201-11413.

Sold Individually

Cylinder head stud (long) suitable for all Lister ST, LR, SR, LD & SL diesel engines, fits all single and multi-cylinder engines in these models. A high quality non-genuine part equivalent to Lister part number 201-11042. This longer stud comes complete with female threaded end to accept rocker cover stud.

Sold Individually

Fuel filler cap joint suitable for fuel tank lids fitted to many Lister Petter fuel tanks, including LD, SL, LR, SR, ST and early LT, LV, TX, TL, TS & TR tanks fitted with the 366-00091 style filler cap.  Equivalent to Lister Petter part number 027-06151.

High quality Lister ST3 three-cylinder engine full overhaul gasket sets, these aftermarket and genuine (when available) gaskets sets are equivalent to Lister P/N 657-23557. For air cooled 3-cylinder engines made between 1972 to 1983.

Genuine Lister LD, LR, SL, SR, ST governor wire link, part number 366-04964.

Genuine Lister decompressor lever 351-13550, early brass type, these were later replace by the aluminium type 351-13551, both are interchangeable. Originally fitted to Lister LD, SL, HA, HB and will also fit LR, SR, ST, STW, HR, HRW.

High quality Lister ST3 three-cylinder engine top end/decoke gasket sets, these gaskets sets are equivalent to Lister P/N 657-23541. For air cooled 3-cylinder ST engines made between 1972 to 1983.