Lister ST & STW

Later type aftermarket cartridge fuel filter being a suitable replacement for the assembly found on many Lister Petter engines. This standard AD600 type filter comes complete fitted with the ACD60 paper element P/N 201-13118. Suitable for Lister LD, SL, LR, SR, ST1, ST2, LPA, LPW, LPWS, VA and Later CS 8-1 & 16-2 engines. Also found on many Petter engines.

Fuel pump housing door gasket suitable for Lister LD1, SL1, LR1, SR1, SW1 & ST1, equivalent to Lister part number 201-11581.

A high-quality reproduction exhaust silencer for Lister ST1, SR1, LD2 & LR2 engines. These silencers are a copy of the original Lister type, made to original Lister specification, with internal baffles for effective exhaust note silencing.

New Lister Petter ST cylinder liner, suitable for ST1, ST2 and ST3 engines. These high quality non-genuine liners are equivalent to Lister Petter part number 201-80061.

Genuine new old stock Lister fuel tank filler cap suitable for Lister LD, SL, LR, SR, ST, LT, LV, TS & TR engine mounted fuel tanks. This bayonet style filler cap is the later “non-spill” type, Lister part number 366-00091, comes complete with the 027-06151 joint.

Genuine Lister LD, LR, SL, SR, ST & STW governor lever, suitable for 1 & 2 cylinder engines only. Lister part number 201-10842.

New valve seat insert suitable for the Exhaust side on Lister ST1, ST2 & ST3 engines.

Sold Individually

New piston assembly & cylinder barrel kit suitable for Lister Petter ST1, ST2 & ST3 air cooled diesel engines. These high quality non-genuine pistons and cylinders are equivalent to Lister Petter Barrel/Piston kit part number 570-35520.

A pair of non-genuine fuel tank packing blocks for mounting fuel tanks to the Lister LD, SL, LR SR & ST range of engines. These aluminium packing blocks are equivalent to Lister part number 201-11491, they can also be used as an alternative for the 202-11490 block.

Sold in Pairs.

Valve rocker bracket (Inlet Side) suitable for Lister ST1, ST2 & ST3 diesel engines. This is a non-genuine part equivalent to Lister Petter part number 201-80340.

Sold Individually (Clip Not Included)

Genuine Lister Petter ST & TS cylinder head gasket, suitable for ST1, ST2, ST3, TS1, TS2 & TS3 air cooled diesel engines. Lister part number 201-80210.

A well-made 5 Litres (1 Gallon) Fuel tank equivalent to Lister-Petter part number 201-11283. This is typically an engine mounted tank commonly found on LD1, SL1, LR1, SR1 engine, and some LD2, SL2, LR2, SR2 and ST1 engines. Equivalent to Lister P/N 201-11283.

New fuel pipe for connecting between the fuel tank and fuel filter body on Lister ST1 & ST2 engines. This high quality aftermarket copper pipe is equivalent to Lister part number 366-06722.

Genuine Lister Petter temperature gauge with 6 foot capillary, suitable for a wide range of Lister Petter air cooled diesel engines, including ST, HR, TS, TR, TX, TL, LT & LV. Will also replace 370-12991 & 370-12992.

Genuine Lister lubricating oil relief valve assembly, suitable for Lister SL3, SR3, *ST2 & *ST3 (See Notes Regarding: ST2 & ST3). Lister part number 570-11071, supersedes 570-11070 & 203-12541.

Lister Petter LR, SR, ST, TS, TL, TR & TX high quality non genuine oil filter element suitable for 1, 2 & 3 cylinder engines, equivalent to Lister part number 201-55370.

Genuine Lister SR, LR, LD, SL, ST & STW, lubricating oil strainer spring, Lister part number 291-21950.

Phosphor bronze camshaft bush set suitable for Lister ST2 engines. This non-genuine bush set is equivalent to and includes Lister part numbers 201-10171 x 1, 201-10181 x 1, 201-80270 x 1 & 202-12030 x 1.

A new non-genuine connecting rod to suit all Lister Petter ST engines, including the ST1, ST2 & ST3. The assembly comes compete with con rod bolts and small end bush fitted, big end bearing will need to be purchased separately.

Equivalent to Lister Petter part number 570-13001.

Push rod to suit Lister ST1, ST2 & ST3, this non-Genuine part is equivalent to Lister Petter part number 204-54270.

Sold individually.

Clockwise rotation flywheel starting ring suitable for Lister LD2, SL2, SL3, LR2, SR2, SR3, ST2 & ST3 diesel engines. Fits 2 & 3 cylinder engines only, not suitable for single cylinder engines. These high quality non-Genuine starting rings are equivalent to Lister 202-12870.

Oil level dipstick for Lister LD2, SL2, LR2, SR2 & ST2 diesel engine where fitted to crankcase door with lift pump and oil filter (Identification Mark 19, refer to parts book to verify). This non-genuine aftermarket dipstick is equivalent to Lister part number 570-10390.

New valve seat insert suitable for the Inlet side on Lister ST1, ST2 & ST3 engines.

Sold Individually

Genuine Lister fuel pump tappet cap for LD, SL, LR, SR, ST & STW diesel engines, Lister part number 201-11440. Refer to image 2 for location of this item.

Sold Individually.

High quality Lister ST1 single cylinder engine De-coke or top gasket sets, these aftermarket and genuine (when available) gaskets sets are equivalent to Lister P/N 657-23503. For air cooled single cylinder engines made between 1975 - 1985.

Rocker lever assembly to suit Lister Petter ST1, ST2 & ST3 air cooled diesel engines, comes complete with bush, adjusting screw and locknut. Equivalent to Lister part numbers 570-13570, comes complete with adjusting screw and lock nut.

Sold Individually

Genuine Lister STW valve rocker lever assembly, suitable for water cooled Lister STW2 & STW3 diesel engines only. Lister part number 570-13560.

A high quality cast iron replacement starting handle suitable for most Lister engines requiring a 1.5" crank starting handle with a ratchet pin that engages from the crank’s keyway. Will fit most Lister A & B Juniors, HR, HRW, LD, LR, SL, SR, ST, and SW. Equivalent to Lister part number 201-12510.

Pair of new fuel tank straps for the smaller 5 Litre (1 Gallon) tanks fitted to Lister LD1, SL1, LR1, SR1 & ST1. These newly made aftermarket straps are made to fit our new 1 Gallon tanks, equivalent to 570-10630, but may not be suitable for some original tanks.

Sold as a pair, 2 x strap assemblies included (As Shown in Photo).

Gromet for leak off pipe (Fuel Tank End) on Lister LD, SL, LR, SR, ST fuel tanks where fitted. This rubber gromet is equivalent to Lister part number 201-11710. For reference, gromet is item #10 in photo.

Lister LD, SL, LR, SR, ST, HA, HB, HW decompression lever shaft assembly suitable for 1, 2 & 3 cylinder engines. Equivalent to Lister part numbers 201-10950 (Shaft), 201-10960 (Screw) & 270-00002 (Nut).

Genuine Lister copper washer found used on oil line fittings and other pipping connection for Lister ST, HA, HB, HR, and others. Lister part number 291-30640, also replaces P/N 103-91. Sold Individually.

Dimensions: 26.50mm ID x 33.25 O.D. x 1.6mm Thick.

Phosphor bronze camshaft bush set suitable for Lister ST3 engines. This non-genuine bush set is equivalent to and includes Lister part numbers 201-10171 x 1, 201-10181 x 1, 201-80270 x 1 & 202-12030 x 2.

Genuine Lister STW cylinder base gasket, suitable for STW2 & STW3 water cooled diesel engines only, Lister part number 201-90541.

Sold Individually