Lister ST & STW

Exhaust Manifold Adaptor Flange 1-1/4" Outlet for Lister Petter ST2 engines. This non-Genuine part is equivalent to Lister Petter part number 202-81660.

New Air Filter Assembly complete with filter element suitable for various Lister Petter models including the ST1 & ST2, may also be suitable for the TS, TR 1 and 2 cylinder range and could also be adapted to other Lister models with a pipe reducer.

Genuine Lister decompressor lever 351-13550, early brass type, these were later replace by the aluminium type 351-13551, both are interchangeable. Originally fitted to Lister LD, SL, HA, HB and will also fit LR, SR, ST, STW, HR, HRW.

Genuine Lister swivel union plug (Brass), Lister part number 201-15400. Used on the fuel system of many Lister models including the LD, SL, LR, SR, ST and others.

Later type aftermarket cartridge fuel filter being a suitable replacement for the assembly found on many Lister Petter engines. This standard AD600 type filter comes complete fitted with the ACD60 paper element P/N 201-13118. Suitable for Lister LD, SL, LR, SR, ST1, ST2, LPA, LPW, LPWS, VA and Later CS 8-1 & 16-2 engines. Also found on many Petter engines.

Injector washer suitable for Lister Petter ST, HR, TS, TR & TL, equivalent to Lister part number 351-40230.

Sold Individually.

Genuine Lister ST1, ST2 & ST3 couple plate for the flexible coupling assembly, this is the couple plate only, part number 202-80960.

Genuine Lister ST cylinder base gasket, suitable for ST1, ST2 & ST3 air cooled diesel engines, Lister part number 201-80170.

Cylinder head stud (long) suitable for all Lister ST, LR, SR, LD & SL diesel engines, fits all single and multi-cylinder engines in these models. A high quality non-genuine part equivalent to Lister part number 201-11042. This longer stud comes complete with female threaded end to accept rocker cover stud.

Sold Individually

Cylinder head stud (short) suitable for all Lister ST, LR, SR, LD & SL diesel engines, fits all single and multi-cylinder engines in these models. A high quality non-genuine part equivalent to Lister part number 201-11052.

Sold Individually

Lister LD, SL, LR, SR, ST, HA, HB, HW decompression lever shaft assembly suitable for 1, 2 & 3 cylinder engines. Equivalent to Lister part numbers 201-10950 (Shaft), 201-10960 (Screw) & 270-00002 (Nut).

Decompressor lever, later aluminium type equivalent to Lister Petter 351-13551, commonly fitted to Lister LR, SR, ST, STW, HR & HRW. These well-made non-Genuine decomp levers are Nikel plated and come complete with a mills pin for fitting.

HDF296 type diesel filter element, suitable for ST3, TS, TL, TR, HA, HB, HS, HR, HRW, HRWS, HL, HLT, JA, JAS, JW, JWS, JWSC fitted with filter housing 354-28360. Note: For HA2/3 from engine numbers 3295HA212, 2294HA312. Equivalent to Lister Petter part number 351-29760.

Oil level dipstick for Lister LD2, SL2, LR2, SR2 & ST2 diesel engine where fitted to crankcase door with lift pump and oil filter (Identification Mark 19, refer to parts book to verify). This non-genuine aftermarket dipstick is equivalent to Lister part number 570-10390.

Oil level dipstick for Lister LD1, SL1, LR1, SR1 & ST1 diesel engines where fitted to crankcase door (Identification Mark 17, refer to parts book to verify). This non-genuine aftermarket dipstick is equivalent to Lister part number 570-10211.  

Exhaust Manifold Adaptor Flange 1-1/2" Outlet for Lister Petter ST3, TS1, TS2.TS3 & TR1, TR2, TR3 engines. Lister Petter part number 010-21801.

Blanking flange for the exhaust manifolds (202-82590 & 203-81251) fitted to Lister ST2 & ST3 engines. Newly made non-Genuine part equivalent to Lister Petter part number 202-82391.

Exhaust manifold flange & exhaust joint used on many Lister Petter SR, ST, TL, TS, TR, TX, LPA & LPW engines, equivalent to Lister Petter 366-01287, supersedes 757-15750.

Valve rocker bracket (Exhaust Side) suitable for Lister ST1, ST2 & ST3 diesel engines. This is a non-genuine part equivalent to Lister Petter part number 201-80350.

Sold Individually (Clip Not Included)

Genuine Lister anti-clockwise flywheel starting ring for Lister LD2, SL2, SL3, LR2, SR2, SR3, ST2 & ST3 diesel engines. Fits 2 & 3 cylinder engines only, not suitable for single cylinder engines.

Clockwise rotation flywheel starting ring suitable for Lister LD2, SL2, SL3, LR2, SR2, SR3, ST2 & ST3 diesel engines. Fits 2 & 3 cylinder engines only, not suitable for single cylinder engines. These high quality non-Genuine starting rings are equivalent to Lister 202-12870.

Clockwise rotation flywheel starting ring suitable for Lister LD1, SL1, LR1, SR1, ST1 diesel engines. Fits single cylinder engines only, not suitable for multi-cylinder engines. Lister part number 201-12870.

Fuel filter assembly complete with CAV Delphi type HDF296 filter element, these filter assemblies can be found on Lister Petter ST, TS TR & HR models where this type of fuel filter was fitted, both inlet and out threads are 1/2"x20UNF. This non-genuine aftermarket assembly is equivalent to Lister Petter part number 354-28360.

Fuel filter element suitable for a wide range of Lister Petter engines fitted with the AC Delco AD600 type filter, including the LT, LV, TS, TR, AC, LD, LR, SR & ST range, also found on the later CS 8/1, 16/2 slow speed engines. Equivalent to Lister Patter part number 201-13118.

Genuine Lister fuel leak off pipe for SL3, SR3 & Early ST3 air cooled diesel engines (See notes regarding ST3 engines). Lister part number 203-17131, supersedes part number 203-81940.

Fuel injector leak off pipe suitable for Lister ST2, LR2 & SR2, a well-made non-Genuine assembly equivalent to Lister part number 202-17131.

New fuel pipe for connecting between the fuel tank and fuel filter body on Lister ST1 & ST2 engines. This high quality aftermarket copper pipe is equivalent to Lister part number 366-06722.

Genuine Lister fuel pump clamp for Lister LD, SL, LR, SR, SW, ST, STW, HA, HB, HW, HR, HRW engines, part number 201-11540.

Fuel pump delivery valve holder suitable for CAV, PYROX, Bryce & Bosch PF1A & BPF1A type fuel injector pumps. Genuine CAV, part number 7033-97. Used on a wide range of Lister air cooled engines.

Fuel pump housing door gasket suitable for Lister LD1, SL1, LR1, SR1, SW1 & ST1, equivalent to Lister part number 201-11581.

Genuine Lister fuel pump tappet assembly for LD, SL, LR, SR, SW, ST, STW, HA, HB, HW, HR, HRW diesel engines. Lister part number 570-10030.

Genuine Lister fuel pump tappet cap for LD, SL, LR, SR, ST & STW diesel engines, Lister part number 201-11440. Refer to image 2 for location of this item.

Sold Individually.

Fuel filler cap joint suitable for fuel tank lids fitted to many Lister Petter fuel tanks, including LD, SL, LR, SR, ST and early LT, LV, TX, TL, TS & TR tanks fitted with the 366-00091 style filler cap.  Equivalent to Lister Petter part number 027-06151.

Pair of new fuel tank straps for the smaller 5 Litre (1 Gallon) tanks fitted to Lister LD1, SL1, LR1, SR1 & ST1. These newly made aftermarket straps are made to fit our new 1 Gallon tanks, equivalent to 570-10630, but may not be suitable for some original tanks.

Sold as a pair, 2 x strap assemblies included (As Shown in Photo).

Genuine Lister LD. SL, LR, SR, ST, HA, HB, HR breather assembly, part number 201-10982.

Genuine Lister LD, LR, SL, SR, ST & STW SW governor lever fulcrum (Tee), part number 201-10830.

Genuine Lister Petter temperature gauge with 6 foot capillary, suitable for a wide range of Lister Petter air cooled diesel engines, including ST, HR, TS, TR, TX, TL, LT & LV. Will also replace 370-12991 & 370-12992.

Governor weight spring suitable for Lister ST, LR, SR, SL diesel engines. Important: NOT suitable for all engine speeds, see further details below on this page for compatible engines. This non-genuine part is equivalent to Lister part number 201-10820.

Sold Individually

Genuine Lister new old stock injector clamp for Lister LD, SL, LR, SR, SW, ST, STW, HA, HB, HW, HR, HRW engines, part number 351-10580.

Genuine Lister Petter inlet & exhaust manifold clamping washer for ST2, ST3, TS2, TS3, TR2 & TR3 were fitted. Also used as spacer washer on TS1 fuel filter bracket & 8.25 litre fuel tank mounting.

Valve rocker bracket (Inlet Side) suitable for Lister ST1, ST2 & ST3 diesel engines. This is a non-genuine part equivalent to Lister Petter part number 201-80340.

Sold Individually (Clip Not Included)

Gromet for leak off pipe (Fuel Tank End) on Lister LD, SL, LR, SR, ST fuel tanks where fitted. This rubber gromet is equivalent to Lister part number 201-11710. For reference, gromet is item #10 in photo.

A high quality cast iron replacement starting handle suitable for most Lister engines requiring a 1.5" crank starting handle with a ratchet pin that engages from the crank’s keyway. Will fit most Lister A & B Juniors, HR, HRW, LD, LR, SL, SR, ST, and SW. Equivalent to Lister part number 201-12510.

Genuine Lister copper washer found used on oil line fittings and other pipping connection for Lister ST, HA, HB, HR, and others. Lister part number 291-30640, also replaces P/N 103-91. Sold Individually.

Dimensions: 26.50mm ID x 33.25 O.D. x 1.6mm Thick.

Genuine new old stock Lister fuel tank filler cap suitable for Lister LD, SL, LR, SR, ST, LT, LV, TS & TR engine mounted fuel tanks. This bayonet style filler cap is the later “non-spill” type, Lister part number 366-00091, comes complete with the 027-06151 joint.