Electrical & Gauges

Genuine Lister Petter 12 Volt Solenoid Switch, part number 351-31480. Supersedes and replaces 291-29390.

Genuine Lister Petter 24V fuel shut off solenoid (energised to run), suitable for Lister Petter TS1, TR1, TS2, TR2, TS3, TR3, TX, LPA & LPW engines fitted with a 24V electrical system. Lister Petter part number 366-07198.

Genuine Lister Petter stator assembly 366-08142, for LT, LV, TS & TR engine fitted with the Nicsa flywheel charge windings system (*See notes regarding Nicsa and Synchro systems).

Oil pressure gauge, 0-6 Bar (0-100 PSI), suitable for Lister JP, CD, CE, LD, SL, HA, HB, LR, SR, SW, ST, STW, HR, HRW, TX, TS, TL & TR. These new high quality stainless steel gauges are a suitable replacement for Lister Petter part number 351-15160. Gauge face measures approximately 50mm or 2”, with a bottom fitting ¼” BSPP thread, Glycerine filled.

Genuine Lister Petter TS & TR cable loom for 12V electric start panel with the Nicsa charging system and with provision for two gauges in the panel.

Genuine Lister Petter circuit breaker kit for the fuel control solenoid on Lister Petter TS, TR, LV, LPA & LPW. Includes the 12V circuit breaker, cables, washers, and label.

Genuine Lister Petter swivel union plug for the T Range, including TS, TR, TL & TX. This union distributes oil to the oil distribution block or oil gauge where they need to be fitted. Shown in the second image as item number 1.

Air temperature switch suitable for Lister Petter TS, TR, TL & TX, equivalent to Lister Petter part number 202-45310, also replaces 202-36660. Please refer to image 2 (Item 4) showing this type of switch in use. This is the replacement switch only, Does NOT include bracket or moulded seal.

Genuine Lister Petter temperature gauge with 6 foot capillary, suitable for a wide range of Lister Petter air cooled diesel engines, including ST, HR, TS, TR, TX, TL, LT & LV. Will also replace 370-12991 & 370-12992.

Head temperature switch suitable for Lister Petter TS & TR engines running above 1851 rpm, nominally closed set at 130C and break on rise. Please refer to your engine’s manual for part suitability. This is a non-genuine part is equivalent to Lister Petter part number 202-36650.

Head temperature switch suitable for Lister Petter TS & TR engines running up to 1850 rpm, nominally closed set at 150C and break on rise. Please refer to your engine’s manual for part suitability. This is a non-genuine part is equivalent to Lister Petter part number 382-08564.

Head temperature switch suitable for Lister Petter TS2, TS3 & TR2 & TR3 engines, nominally open set at 130C and make contact on rise. Please refer to your engine’s manual for part suitability. This is a non-genuine part is equivalent to Lister Petter part number 366-07221.