Lister D & DK Parts

A high-quality reprint D & DK, F & FK instruction Manual with detailed parts list for both the petrol and Paraffin (Vaporising Oil) engines. Covering the later type D & DK engine with chain driven magnetos, this 34-page (A4 Size) manual is a valuable reference for anyone owing or restoring one of these engines.

Good quality piston ring set for Lister D petrol engines and DK petrol/kero engines. This ring set consists of 3 compression rings and 1 oil scraper ring to suit a standard 3” bore.

Good quality piston ring set for Lister D petrol engines and DK petrol/Kero engines. This ring set consists of 3 compression rings and 1 oil scraper ring to suit a 3” +0.010” oversize bore.

New cast iron reproduction hopper cooled Lister D cover, equivalent to Lister part number D112H. Suitable for all Lister D & DK engines, these high quality reproduction castings are drilled and machined ready to fit to your engine.

New brass vintage style bent nose water drain tap with ¼” BSP thread, suitable for many vintage stationary engines including the Lister D.

A new high quality Lister D copper head gasket, with copper sheeting both sides and copper fire ring. The inner material is made from non asbestos material.

Lister D overhaul gasket set, equivalent to Lister part number 657-10840 & SP274.

Head Gasket Not Included (Available Separately).

A good quality reproduction exhaust silencer suitable for the Lister D & DK petrol/kero engines and the LD1 diesel engines. These silencers have an internal baffle, so they will be effective in quieting down your engine, as well as looking the part.

A good quality reproduction exhaust silencer for Lister D and DK engines. These silencers have internal baffles for effective exhaust note silencing.

A high quality small stationary engine silencer that would suit a wide range of stationary engines requiring a 1' BSP thread exhaust. This muffler will fit engines such as Lister D, Rosebery/Buzacott, Ronaldson & Tippett and many others.

A good quality solid cast iron exhaust flange for Lister D & DK engines. The thread is 1 Inch BSP female, to suit original or our reproduction 1” BSP exhaust pipes. The fixing hole centres are 2 inches apart.

A replacement flywheel Gib key suitable for use on the Lister D & DK type engines, equivalent to Lister part number H75.These new Gib Keys may need final filling and size adjustments to suit your engines unique flywheel keyway.

A high quality pair of precision made valve springs for the Lister D & DK type engines. Made from 55CrSi oil tempered and quenched spring steel wire, with a further tempering and shot peening treatment after manufacturing, the ends have been precision ground, and finally, a light coating of anti-rust oil applied for corrosion prevention. Equivalent to Lister part number D323 or 001-00323.

Decal set for the Lister D and DK engines. These are water slide transfers, instructions for correct use are included. See dimensions below.

Pair of 4” rotation direction arrows for smaller Lister engines including the Lister D, A & B Juniors, and H. This pair of opposing arrows allows for placement on both left and right side flywheels for 2 flywheel models and can be used on both Clockwise and Anti-clockwise by simply switching placement or arrow used.

Sold in Opposing Pairs (As Shown in Photo)

A water level transfer suitable for many water cooled vintage stationary engines, would suit both engine mounted hoppers and separate water tanks. These are water slide transfers, instructions for correct use are included. See dimensions below.

A new high quality reproduction governor spring suitable for low speed Lister D, DK, A, AK, B & BK petrol & petrol/kerosine engines and CD & CE diesel engines. See suitable speed ranges below.

A new high quality reproduction governor spring suitable for high speed Lister D, DK, A, AK, B & BK petrol & petrol/kerosine engines and CD & CE diesel engines. See suitable speed ranges below. Equivalent to Lister Part Number: J127

Lister D & DK stationary engine magneto drive chain, this high-quality Tsubaki (Made in Japan) Simplex roller chain has been made to the correct length for use on Lister D engines.

7/16” x 7/8” imperial brass washer suitable for Lister D cylinder head stud washers, these are new old stock washers with the correct clearance to suit 7/16” BSW bolts and studs. Replaces Lister D part number S545.

Sold individually.

7/16" BSW x 4-1/4" long British Whitworth stud. Length of threads (Imperial): TL1 = 0.60" and TL2 = 1.20". Replaces Lister part numbers 027-00535, 27-535 & S535.

Sold Individually.

7/16" BSW x 4-1/4" long British Whitworth stud. Length of threads (Imperial): TL1 = 0.60" and TL2 = 1.20". Replaces Lister part numbers 027-00520, 27-520 & S520.

Sold Individually.

3/16" BSF (British Standard Whitworth, Fine) nut, plane finish (Unplated). Used as a lock nut on Lister D and Lister A & B Junior governor linkage rods, part number S15A.

Lister D, DK & F carburettor sniffer valve spring, equivalent to Lister part number D100, will also replace the earlier 3110 spring. Remanufactured from superior quality high carbon spring steel to be an exact replica of the originals.

Genuine Lister D carburettor air valve, part numbers D109, 1/109, 004-00109.

Genuine Lister D carburettor main jet, part number 1/780 or 1-780. Please check if this part is suitable for engine before purchasing, may not be suitable for all Lister D models.

Genuine new old stock Lister D governor rod spring washer, commonly known as a Thackeray washer or double coil washer. Lister part number S418, 27-418 or 027-00418.

Sold Individually.

Genuine new old stock Lister D & DK governor casting bush (Long), part number 1-4301 or D43. See image 2 for location of this bush.

Genuine Lister governor hooks suitable for a wide range of engines in including the CS, A & B Junior, L & J petrol engines, and others. Note that this is the hook only being sold here, there is NO adjusting nut included.

Brand new D16 spark plug, suits many vintage stationary engines including Lister A & B Junior, Lister H, J, K, L, M, N, P, R & Q, Ronaldson & Tippett N Type, Moffat-Virtue V3 and many others.

Brass spade type spark plug lead terminal for connecting HT lead end to standard type spark plugs with a terminal nut for fixing the cable securely.

Sold Individually

Copper core 7mm HT ignition lead, sold per meter. Taken from 100 meter roll, if you require more than one meter simply add more to your cart and it will be sent as one continuous length where possible.

Sold Per Meter.

Premium quality cotton braided HT ignition cable, 7mm OD with a 1.5mm2 multi strand copper core. Plain black fire retarded cotton cloth braiding covers the PVC insulated core. This high quality product is made in the UK.

Sold Per Meter.

Premium quality cotton braided HT ignition cable, 7mm OD with a 1.5mm2 multi strand copper core. Red with yellow flecks, the fire retarded cotton cloth braiding covers the PVC insulated core. This high quality product is made in the UK.

Sold Per Meter.

Premium quality cotton braided HT ignition cable, 7mm OD with a 1.5mm2 multi strand copper core. Yellow with black flecks, the fire retarded cotton cloth braiding covers the PVC insulated core. This high quality product is made in the UK.

Sold Per Meter.

Premium quality cotton braided HT ignition cable, 7mm OD with a 1.5mm2 multi strand copper core. Plain red fire retarded cotton cloth braiding covers the PVC insulated core. This high quality product is made in the UK.

Sold Per Meter.

Premium quality cotton braided HT ignition cable, 7mm OD with a 1.5mm2 multi strand copper core. Green with red flecks, the fire retarded cotton cloth braiding covers the PVC insulated core. This high quality product is made in the UK.

Sold Per Meter.

A very high quality 3" cylinder liner or repair sleeve also known as a dry sleeve for the Lister D petrol and paraffin models. Will also suit any other vintage stationary engine with a 3” bore needing a sleeve fitted. Please see details of dimensions below.