Lister LD & SL

Fuel filter element suitable for a wide range of Lister Petter engines fitted with the AC Delco AD600 type filter, including the LT, LV, TS, TR, AC, LD, LR, SR & ST range, also found on the later CS 8/1, 16/2 slow speed engines. Equivalent to Lister Patter part number 201-13118.

A high quality cast iron replacement starting handle suitable for most Lister engines requiring a 1.5" crank starting handle with a ratchet pin that engages from the crank’s keyway. Will fit most Lister A & B Juniors, HR, HRW, LD, LR, SL, SR, ST, and SW. Equivalent to Lister part number 201-12510.

Later type aftermarket cartridge fuel filter being a suitable replacement for the assembly found on many Lister Petter engines. This standard AD600 type filter comes complete fitted with the ACD60 paper element P/N 201-13118. Suitable for Lister LD, SL, LR, SR, ST1, ST2, LPA, LPW, LPWS, VA and Later CS 8-1 & 16-2 engines. Also found on many Petter engines.

Fuel lift pump suitable for replacing Lister Petter part numbers 351-12150, 329-24810, 329-62200, 572-71980. This type of lift pump is fitted to many Lister Petter diesel engines including the SL2/3, HA2/3, HB2/3, HR2/3, SR, ST & STW models.

A pair of non-genuine fuel tank packing blocks for mounting fuel tanks to the Lister LD, SL, LR SR & ST range of engines. These aluminium packing blocks are equivalent to Lister part number 201-11491, they can also be used as an alternative for the 202-11490 block.

Sold in Pairs.

A well-made 5 Litres (1 Gallon) Fuel tank equivalent to Lister-Petter part number 201-11283. This is typically an engine mounted tank commonly found on LD1, SL1, LR1, SR1 engine, and some LD2, SL2, LR2, SR2 and ST1 engines. Equivalent to Lister P/N 201-11283.

CAV, Lucas, Bryce or OEM Equivalent injector nozzle for Lister LD1, LD2, SL1, SL2, SL3 & SLMG models. This BDN12SD12 nozzle is equivalent to Lister Part Number 201-12060.

Pair of new fuel tank straps for the smaller 5 Litre (1 Gallon) tanks fitted to Lister LD1, SL1, LR1, SR1 & ST1. These newly made aftermarket straps are made to fit our new 1 Gallon tanks, equivalent to 570-10630, but may not be suitable for some original tanks.

Sold as a pair, 2 x strap assemblies included (As Shown in Photo).

A high-quality reproduction exhaust silencer for Lister ST1, SR1, LD2 & LR2 engines. These silencers are a copy of the original Lister type, made to original Lister specification, with internal baffles for effective exhaust note silencing.

Cylinder head cover joint suitable for Lister Petter LD, SL, LR & SR engines, this non-Genuine gasket is equivalent to Lister part number 201-10510.

Genuine Lister decompressor lever 351-13550, early brass type, these were later replace by the aluminium type 351-13551, both are interchangeable. Originally fitted to Lister LD, SL, HA, HB and will also fit LR, SR, ST, STW, HR, HRW.

High quality FKM (Viton) Double Lip Oil Seal suitable for camshaft oil seal (Gear End) on Lister LD, SL, LR, SR, ST, fits all 1, 2, & 3 cylinder engines in these models. Equivalent to Lister part number 201-13190.

Injector washer suitable for Lister LD, SL, LR, SR, HA, HB equivalent to Lister part number 010-03041.

Sold Individually.

Fuel injector oil seal O ring suitable for Lister LD, SL, LR, SR, HA & HB diesel engines, equivalent to Lister part number 201-11080.

Sold Individually

Genuine Lister Push Rod 201-10311 (Steel), suitable for 1, 2 & 3 cylinder engines in the Lister LD, SL, LR & SR range. These Steel Push Rods can be used instead of aluminium push rods (201-54440) in the SR range, see notes below on this page. Supersedes 570-10860.

Sold Individually.

Genuine Lister Petter, Lucas, Bryce or OEM Equivalent fuel pump plunger and element suitable for fuel pumps on Lister LD, LR and SL diesel engines. This 7032-26A element is equivalent to Lister part number 660-10020.

Oil filler cap joint suitable for the oil filler caps fitted to Lister FR, LD, SL, HA, HB, LR, SR, ST, LT, LV, HR, HL, JA, JW, TX, TL, TS, TR. Equivalent to Lister Petter part number 303-00253.

Exhaust/Intake manifold joint suitable for Lister LD, SL, LR & SR engines, this non-Genuine gasket is equivalent to Lister part number 201-11131, can also replace 201-11130 (See notes & refer to image 2).

Gromet for leak off pipe (Fuel Tank End) on Lister LD, SL, LR, SR, ST fuel tanks where fitted. This rubber gromet is equivalent to Lister part number 201-11710. For reference, gromet is item #10 in photo.

Oil pressure gauge, 0-6 Bar (0-100 PSI), suitable for Lister JP, CD, CE, LD, SL, HA, HB, LR, SR, SW, ST, STW, HR, HRW, TX, TS, TL & TR. These new high quality stainless steel gauges are a suitable replacement for Lister Petter part number 351-15160. Gauge face measures approximately 50mm or 2”, with a bottom fitting ¼” BSPP thread, Glycerine filled.

New fuel pipe for connecting between the fuel tank and fuel filter body on Lister LD1, LD2, SL1, SL2, SL3, LR1, LR2, SR1 & SR2 engines. This high quality aftermarket copper pipe is equivalent to Lister part number 201-11674.

Pair of crankshaft thrust washers to fit all Lister Petter LD, SL, LR, SR, SW, LT and LV engines from one to three cylinders. There are 2 trust washers in each engine, this set contains 2, enough washers for 1 engine.

Equivalent to Lister Petter part number: 201-12380 x2

High quality Lister LD1 full overhaul gasket set, these aftermarket gaskets sets are equivalent to Lister P/N 657-10013. For air cooled single cylinder LD engines made between 1956 - 1966.

A good quality reproduction exhaust silencer for Lister LD1 & LR1 engines. These silencers have internal baffles for effective exhaust note silencing.

Lister LD, SL, LR & SR cylinder head nut washer, also used in various other applications on a number of other Lister Petter engines, including but not limited to starter motor nut washers on some models etc. Lister part number 027-00545.

Sold Individually.

Bleed screw or air vent screw suitable for CAV, Bryce, Bosch & Pyrox PF1A, BPF1A, FAOAB, FAOAN type fuel injector pumps, found on many single and multi-cylinder stationary engines including Lister’s and others.

Oil bath air filter suitable for Lister LD1, LD2, SL1, SL2 & LR1, LR2, SR1, SR2 engines up to 2000 rpm (Not Suitable for high speed engines running over 2000 rpm). Fits intake manifolds with flanges up to 38mm (1-1/2”).

Governor weight spring suitable for Lister ST, LR, SR, SL diesel engines. Important: NOT suitable for all engine speeds, see further details below on this page for compatible engines. This non-genuine part is equivalent to Lister part number 201-10820.

Sold Individually

High quality Lister SL1 diesel engine full overhaul gasket set, these aftermarket gaskets sets are equivalent to Lister P/N 657-10033. For air cooled SL1 engines made between 1961 - 1966.

Genuine Lister LD, SL, LR, SR, HA, HB & FR rocker bush, Lister part number 291-20701.

High quality Lister LD1 single cylinder engine De-coke or top gasket sets, these aftermarket and genuine (when available) gaskets sets are equivalent to Lister P/N 657-10002. For air cooled single cylinder LD engines made between 1956 - 1966.

Fuel filler cap joint suitable for fuel tank lids fitted to many Lister Petter fuel tanks, including LD, SL, LR, SR, ST and early LT, LV, TX, TL, TS & TR tanks fitted with the 366-00091 style filler cap.  Equivalent to Lister Petter part number 027-06151.

Fuel pump housing door gasket suitable for Lister LD1, SL1, LR1, SR1, SW1 & ST1, equivalent to Lister part number 201-11581.

Genuine Lister swivel union plug (Brass), Lister part number 201-15400. Used on the fuel system of many Lister models including the LD, SL, LR, SR, ST and others.