Lister LR Parts

Lister LD, SL, LR & SR cylinder head nut washer, also used in various other applications on a number of other Lister Petter engines, including but not limited to starter motor nut washers on some models etc. Lister part number 027-00545.

Sold Individually.

Fuel injector oil seal O ring suitable for Lister LD, SL, LR, SR, HA & HB diesel engines, equivalent to Lister part number 201-11080.

Sold Individually

Gromet for leak off pipe (Fuel Tank End) on Lister LD, SL, LR, SR, ST fuel tanks where fitted. This rubber gromet is equivalent to Lister part number 201-11710. For reference, gromet is item #10 in photo.

Genuine Lister LD & LR cylinder head shim, suitable for LD1, LD2, LR1 & LR2, Lister part number 201-12300. The shim is 0.003” thick, use as many or as few as you need in combination with the head gasket to set the correct cylinder head bump clearance.

Sold Individually.

Genuine decompressor spring for the cylinder head/rocker cover on Lister LD, SL, HA, HB, LR, SR, HR. Lister part number 201-12270.

Sold Individually (Spring Only).

Oil filler cap joint suitable for the oil filler caps fitted to Lister FR, LD, SL, HA, HB, LR, SR, ST, LT, LV, HR, HL, JA, JW, TX, TL, TS, TR. Equivalent to Lister Petter part number 303-00253.

Fuel filler cap joint suitable for fuel tank lids fitted to many Lister Petter fuel tanks, including LD, SL, LR, SR, ST and early LT, LV, TX, TL, TS & TR tanks fitted with the 366-00091 style filler cap.  Equivalent to Lister Petter part number 027-06151.

Pair of gudgeon pin circlips suitable for Lister LD1, LD2, LR1 & LR2 engines, equivalent to Lister part number 201-10100 x 2.

New Lister LR & SR gudgeon pin retainer circlips, part number 201-50570. Sold individually.

Injector washer suitable for Lister LD, SL, LR, SR, HA, HB equivalent to Lister part number 010-03041.

Sold Individually.

Lister LD, SL, LR, SR & ST fuel pump housing joint to top plate, equivalent to Lister part number 201-11413.

Sold Individually

Exhaust/Intake manifold joint suitable for Lister LD, SL, LR & SR engines, this non-Genuine gasket is equivalent to Lister part number 201-11131, can also replace 201-11130 (See notes & refer to image 2).

Bleed screw or air vent screw suitable for CAV, Bryce, Bosch & Pyrox PF1A, BPF1A, FAOAB, FAOAN type fuel injector pumps, found on many single and multi-cylinder stationary engines including Lister’s and others.

Cylinder head cover joint suitable for Lister Petter LD, SL, LR & SR engines, this non-Genuine gasket is equivalent to Lister part number 201-10510.

Genuine Lister LD, SL, LR, SR, HA, HB & FR rocker bush, Lister part number 291-20701.

Genuine Lister LD, SL & LR governor control lever spring, Lister part number 201-12330.

Genuine Lister end cover oil thrower ring suitable for Lister LD, SL, LR, SR, SW, ST & STW models.
Lister part number 201-13200. Sold Individually.

Genuine Lister LD, LR, SL, SR, ST governor wire link, part number 366-04964.

Fuel pump housing door gasket suitable for Lister LD1, SL1, LR1, SR1, SW1 & ST1, equivalent to Lister part number 201-11581.

Genuine Lister LR connecting rod bolt (nut NOT included, bolt only), Lister part number 201-50050.

Sold Individually.

Fuel filter element suitable for a wide range of Lister Petter engines fitted with the AC Delco AD600 type filter, including the LT, LV, TS, TR, AC, LD, LR, SR & ST range, also found on the later CS 8/1, 16/2 slow speed engines. Equivalent to Lister Patter part number 201-13118.

Genuine Lister SR, LR, LD, SL, ST & STW, lubricating oil strainer spring, Lister part number 291-21950.

Genuine Lister flywheel retaining lock washer suitable for all single and multi-cylinder engines in the LD, SL, LR & SR range.

Governor weight spring suitable for Lister ST, LR, SR, SL diesel engines. Important: NOT suitable for all engine speeds, see further details below on this page for compatible engines. This non-genuine part is equivalent to Lister part number 201-10820.

Sold Individually

Genuine Lister LD, LR, SL, SR, ST & STW SW governor lever fulcrum (Tee), part number 201-10830.

Lister Petter LR, SR, ST, TS, TL, TR & TX high quality non genuine oil filter element suitable for 1, 2 & 3 cylinder engines, equivalent to Lister part number 201-55370.

Swivel union plug (Banjo Bolt) used on the fuel system of many Lister engines including LD, SL LR, SR, ST, HA, HB, HR, CS, LPA, LPW, TS, TR. These are quality made 1/4” BSP non-Genuine banjo bolts equivalent to Lister part number 201-15400 (Steel).

New precision made gudgeon pin suitable for Lister LD1, LD2, LR1 & LR2 engines, this high quality non-Genuine part is equivalent to Lister part number 201-10090.

Genuine Lister LD. SL, LR, SR, ST, HA, HB, HR breather assembly, part number 201-10982.

Genuine Lister Push Rod 201-10311 (Steel), suitable for 1, 2 & 3 cylinder engines in the Lister LD, SL, LR & SR range. These Steel Push Rods can be used instead of aluminium push rods (201-54440) in the SR range, see notes below on this page. Supersedes 570-10860.

Sold Individually.

Genuine Lister decompressor lever 351-13550, early brass type, these were later replace by the aluminium type 351-13551, both are interchangeable. Originally fitted to Lister LD, SL, HA, HB and will also fit LR, SR, ST, STW, HR, HRW.

Decompressor lever, later aluminium type equivalent to Lister Petter 351-13551, commonly fitted to Lister LR, SR, ST, STW, HR & HRW. These well-made non-Genuine decomp levers are Nikel plated and come complete with a mills pin for fitting.

A high quality OEM equivalent 1/338 fuel pump delivery valve equivalent to Lister Petter part number 660-11050, suitable for use in Lister LR, SR, ST, HA2, HA3, HB2, HB3 and LT1 engines Builds 1-7.

High quality FKM (Viton) Double Lip Oil Seal suitable for camshaft oil seal (Gear End) on Lister LD, SL, LR, SR, ST, fits all 1, 2, & 3 cylinder engines in these models. Equivalent to Lister part number 201-13190.

Genuine Lister fuel pump tappet guide to suit a wide range of Lister diesels including the LD, SL, LR, SR, ST, STW and HR range of engines. Lister part number 201-11471.

Genuine Lister flywheel key to suit all Lister LD, SL, LR, SR engines, single and multi-cylinder. Lister part number 201-26150.

Cylinder head stud (short) suitable for all Lister ST, LR, SR, LD & SL diesel engines, fits all single and multi-cylinder engines in these models. A high quality non-genuine part equivalent to Lister part number 201-11052.

Sold Individually

Lister LD, SL, LR, SR, ST, HA, HB, HW decompression lever shaft assembly suitable for 1, 2 & 3 cylinder engines. Equivalent to Lister part numbers 201-10950 (Shaft), 201-10960 (Screw) & 270-00002 (Nut).

Oil level dipstick for Lister LD1, SL1, LR1, SR1 & ST1 diesel engines where fitted to crankcase door (Identification Mark 17, refer to parts book to verify). This non-genuine aftermarket dipstick is equivalent to Lister part number 570-10211.  

A pair of non-genuine fuel tank packing blocks for mounting fuel tanks to the Lister LD, SL, LR SR & ST range of engines. These aluminium packing blocks are equivalent to Lister part number 201-11491, they can also be used as an alternative for the 202-11490 block.

Sold in Pairs.

Genuine Lister Petter air filter element 201-26010, fits Lister LR & SR with dry type air filters. Please refer to the dimensions listed below as a guide to whether this filter element is suitable for your engine.