Lister LR Parts

Later type aftermarket cartridge fuel filter being a suitable replacement for the assembly found on many Lister Petter engines. This standard AD600 type filter comes complete fitted with the ACD60 paper element P/N 201-13118. Suitable for Lister LD, SL, LR, SR, ST1, ST2, LPA, LPW, LPWS, VA and Later CS 8-1 & 16-2 engines. Also found on many Petter engines.

Genuine Lister LD, SL, LR, SR, HA, HB & FR rocker bush, Lister part number 291-20701.

Phosphor bronze camshaft bush (Gear End) suitable for Lister LD, SL, LR, SR & ST engines. This non-genuine bush is equivalent to Lister part number Lister 201-10181.

Sold Individually

Fuel filler cap joint suitable for fuel tank lids fitted to many Lister Petter fuel tanks, including LD, SL, LR, SR, ST and early LT, LV, TX, TL, TS & TR tanks fitted with the 366-00091 style filler cap.  Equivalent to Lister Petter part number 027-06151.

New standard size cylinder to suit the Lister LR range of engines with a 3” (76.2mm) bore. These high quality non-Genuine liners are equivalent to Lister Petter part number 201-70110.

Exhaust/Intake manifold joint suitable for Lister LD, SL, LR & SR engines, this non-Genuine gasket is equivalent to Lister part number 201-11131, can also replace 201-11130 (See notes & refer to image 2).

Genuine Lister flywheel key to suit all Lister LD, SL, LR, SR engines, single and multi-cylinder. Lister part number 201-26150.

Fuel injector leak off pipe suitable for Lister ST2, LR2 & SR2, a well-made non-Genuine assembly equivalent to Lister part number 202-17131.

Genuine Lister Petter oil filler neck 027-06317, used on many Lister engines including LD, SL, LR, SR, HA, HB, HW, ST, STW, HR, HRW, TS, TL & TR. Supersedes 027-03821 & 27-3821.

Fuel injector oil seal O ring suitable for Lister LD, SL, LR, SR, HA & HB diesel engines, equivalent to Lister part number 201-11080.

Sold Individually

Cylinder head stud (long) suitable for all Lister ST, LR, SR, LD & SL diesel engines, fits all single and multi-cylinder engines in these models. A high quality non-genuine part equivalent to Lister part number 201-11042. This longer stud comes complete with female threaded end to accept rocker cover stud.

Sold Individually

High quality Lister LR1 single cylinder engine De-coke or top gasket sets, these gaskets sets are equivalent to Lister P/N 657-17034. For air cooled single cylinder engines made between 1967 to 1976.

Phosphor bronze crankcase end cover bush suitable for Lister LD, SL, LR, SR & ST engines. This non-genuine bush is equivalent to Lister part number Lister 201-10171.

Sold Individually

Oil filler cap joint suitable for the oil filler caps fitted to Lister FR, LD, SL, HA, HB, LR, SR, ST, LT, LV, HR, HL, JA, JW, TX, TL, TS, TR. Equivalent to Lister Petter part number 303-00253.

Injector washer suitable for Lister LD, SL, LR, SR, HA, HB equivalent to Lister part number 010-03041.

Sold Individually.

Genuine Lister LR, SR, LD, SL & FR valve tappet, Lister part number 291-21310.

Pair of new fuel tank straps for the smaller 5 Litre (1 Gallon) tanks fitted to Lister LD1, SL1, LR1, SR1 & ST1. These newly made aftermarket straps are made to fit our new 1 Gallon tanks, equivalent to 570-10630, but may not be suitable for some original tanks.

Sold as a pair, 2 x strap assemblies included (As Shown in Photo).

Swivel union plug (Banjo Bolt) used on the fuel system of many Lister engines including LD, SL LR, SR, ST, HA, HB, HR, CS, LPA, LPW, TS, TR. These are quality made 1/4” BSP non-Genuine banjo bolts equivalent to Lister part number 201-15400 (Steel).

New Lister LR & SR gudgeon pin retainer circlips, part number 201-50570. Sold individually.

Genuine Lister fuel pump clamp for Lister LD, SL, LR, SR, SW, ST, STW, HA, HB, HW, HR, HRW engines, part number 201-11540.

Lister LR, SR & LD, SL cylinder head cover assembly suitable for 1, 2 & 3 cylinder engines. The assembly comes complete with filler cap and decompression leaver fitted. Lister part number 201-17423, will also replace and supersedes 201-17420.

Genuine Lister Push Rod 201-10311 (Steel), suitable for 1, 2 & 3 cylinder engines in the Lister LD, SL, LR & SR range. These Steel Push Rods can be used instead of aluminium push rods (201-54440) in the SR range, see notes below on this page. Supersedes 570-10860.

Sold Individually.

Cylinder head stud (short) suitable for all Lister ST, LR, SR, LD & SL diesel engines, fits all single and multi-cylinder engines in these models. A high quality non-genuine part equivalent to Lister part number 201-11052.

Sold Individually

Genuine piston assembly for Lister LR1 & LR2 engines. The assembly includes piston, ring set, gudgeon pin and cir-clips. Lister part number 570-11308, available in Standard size only.

Genuine Lister Petter, CAV, Lucas, Bryce, or OEM Equivalent fuel injector nozzle suitable for Lister LR1 & LR2 diesel engines. The BDN4SDC6453 nozzle is equivalent to Lister part number 201-12063.

Oil pressure gauge, 0-6 Bar (0-100 PSI), suitable for Lister JP, CD, CE, LD, SL, HA, HB, LR, SR, SW, ST, STW, HR, HRW, TX, TS, TL & TR. These new high quality stainless steel gauges are a suitable replacement for Lister Petter part number 351-15160. Gauge face measures approximately 50mm or 2”, with a bottom fitting ¼” BSPP thread, Glycerine filled.

Fuel pump housing door gasket suitable for Lister LD1, SL1, LR1, SR1, SW1 & ST1, equivalent to Lister part number 201-11581.

A high quality cast iron replacement starting handle suitable for most Lister engines requiring a 1.5" crank starting handle with a ratchet pin that engages from the crank’s keyway. Will fit most Lister A & B Juniors, HR, HRW, LD, LR, SL, SR, ST, and SW. Equivalent to Lister part number 201-12510.

Bleed screw or air vent screw suitable for CAV, Bryce, Bosch & Pyrox PF1A, BPF1A, FAOAB, FAOAN type fuel injector pumps, found on many single and multi-cylinder stationary engines including Lister’s and others.

Genuine Lister end cover oil thrower ring suitable for Lister LD, SL, LR, SR, SW, ST & STW models.
Lister part number 201-13200. Sold Individually.

Genuine decompressor spring for the cylinder head/rocker cover on Lister LD, SL, HA, HB, LR, SR, HR. Lister part number 201-12270.

Sold Individually (Spring Only).

Pair of gudgeon pin circlips suitable for Lister LD1, LD2, LR1 & LR2 engines, equivalent to Lister part number 201-10100 x 2.

Cylinder head cover joint suitable for Lister Petter LD, SL, LR & SR engines, this non-Genuine gasket is equivalent to Lister part number 201-10510.

A well-made 5 Litres (1 Gallon) Fuel tank equivalent to Lister-Petter part number 201-11283. This is typically an engine mounted tank commonly found on LD1, SL1, LR1, SR1 engine, and some LD2, SL2, LR2, SR2 and ST1 engines. Equivalent to Lister P/N 201-11283.

Genuine new old stock Lister fuel tank filler cap suitable for Lister LD, SL, LR, SR, ST, LT, LV, TS & TR engine mounted fuel tanks. This bayonet style filler cap is the later “non-spill” type, Lister part number 366-00091, comes complete with the 027-06151 joint.

Genuine Lister LR connecting rod bolt (nut NOT included, bolt only), Lister part number 201-50050.

Sold Individually.

Governor weight spring suitable for Lister ST, LR, SR, SL diesel engines. Important: NOT suitable for all engine speeds, see further details below on this page for compatible engines. This non-genuine part is equivalent to Lister part number 201-10820.

Sold Individually

Genuine Lister phosphor bronze camshaft bush (Flywheel End) suitable for Lister LD, SL, LR, SR & SW engines. Lister part number 201-10190.

Sold Individually

Genuine Lister valve rocker lever complete with bush for LD1, LD2, SL1, SL2 & SL3 (Late Type) and all LR1 & LR2 engines. Lister part number 201-19370 (Lever) & 291-20701 (Bush). See notes for early LD & SL engines.