Lister SR Parts

Genuine Lister lubricating oil relief valve assembly, suitable for Lister SL3, SR3, *ST2 & *ST3 (See Notes Regarding: ST2 & ST3). Lister part number 570-11071, supersedes 570-11070 & 203-12541.

Genuine Lister phosphor bronze camshaft bush (Flywheel End) suitable for Lister LD, SL, LR, SR & SW engines. Lister part number 201-10190.

Sold Individually

Lister LD, SL, LR, SR, ST, HA, HB, HW decompression lever shaft assembly suitable for 1, 2 & 3 cylinder engines. Equivalent to Lister part numbers 201-10950 (Shaft), 201-10960 (Screw) & 270-00002 (Nut).

Decompressor lever, later aluminium type equivalent to Lister Petter 351-13551, commonly fitted to Lister LR, SR, ST, STW, HR & HRW. These well-made non-Genuine decomp levers are Nikel plated and come complete with a mills pin for fitting.

Clockwise rotation flywheel starting ring suitable for Lister LD1, SL1, LR1, SR1, ST1 diesel engines. Fits single cylinder engines only, not suitable for multi-cylinder engines. Lister part number 201-12870.

Fuel injector leak off pipe suitable for Lister ST2, LR2 & SR2, a well-made non-Genuine assembly equivalent to Lister part number 202-17131.

Swivel union plug (Banjo Bolt) used on the fuel system of many Lister engines including LD, SL LR, SR, ST, HA, HB, HR, CS, LPA, LPW, TS, TR. These are quality made 1/4” BSP non-Genuine banjo bolts equivalent to Lister part number 201-15400 (Steel).

Thermostat suitable for Lister STW, HRW, SW, HW, JW, Early LPW engines requiring a 74 degree thermostat. Equivalent to Lister part number 354-44070, replaces 010-02290, 331511, 354-44072, 354-44071.  For suitability, see notes below or refer to your service manual. If in doubt, please ask before purchasing.

Oil pressure gauge, 0-6 Bar (0-100 PSI), suitable for Lister JP, CD, CE, LD, SL, HA, HB, LR, SR, SW, ST, STW, HR, HRW, TX, TS, TL & TR. These new high quality stainless steel gauges are a suitable replacement for Lister Petter part number 351-15160. Gauge face measures approximately 50mm or 2”, with a bottom fitting ¼” BSPP thread, Glycerine filled.

Lister LD, SL, LR & SR cylinder head nut washer, also used in various other applications on a number of other Lister Petter engines, including but not limited to starter motor nut washers on some models etc. Lister part number 027-00545.

Sold Individually.

Genuine Lister fuel pump tappet cap for LD, SL, LR, SR, ST & STW diesel engines, Lister part number 201-11440. Refer to image 2 for location of this item.

Sold Individually.

Fuel filler cap joint suitable for fuel tank lids fitted to many Lister Petter fuel tanks, including LD, SL, LR, SR, ST and early LT, LV, TX, TL, TS & TR tanks fitted with the 366-00091 style filler cap.  Equivalent to Lister Petter part number 027-06151.

Oil filler cap joint suitable for the oil filler caps fitted to Lister FR, LD, SL, HA, HB, LR, SR, ST, LT, LV, HR, HL, JA, JW, TX, TL, TS, TR. Equivalent to Lister Petter part number 303-00253.

Genuine Lister Ferrule Joint Ring for Lister HRW, STW, SW, HW & JW engines, part number 351-40130. This cylinder head joint ring is used for sealing the water passages between the cylinder barrel and cylinder head on a wide range of water cooled Lister diesel engines.

Exhaust manifold flange & exhaust joint used on many Lister Petter SR, ST, TL, TS, TR, TX, LPA & LPW engines, equivalent to Lister Petter 366-01287, supersedes 757-15750.

Genuine Lister SW cylinder base gasket, suitable for SW1 & SW2 water cooled diesel engines only, Lister part number 201-60071.

Sold Individually

Fuel pump housing door gasket suitable for Lister LD1, SL1, LR1, SR1, SW1 & ST1, equivalent to Lister part number 201-11581.

Genuine Lister SR1 leak-off pipe “Injector to Tee” with self-priming, for engines fitted with lift pumps only. Lister part number 201-17071.

Genuine Lister SR & SW cylinder head shim, suitable for SR1, SR2, SR3, SR4, SW1 & SW2. Lister part number 201-50620. The shim is 0.003” thick, use as many or as few as you need in combination with the head gasket to set the correct cylinder head bump clearance.

Sold Individually.

Genuine Lister SR & SW cylinder head gasket, suitable for SR1, SR2, SR3 & SR4 air cooled diesel engines, and SW1 & SW2 water cooled engines. Lister part number 201-50610.

Sold Individually

Genuine Lister valve rocker lever complete with bush for Lister SR & SW diesel engines. Lister part number 201-50940 (Lever) & 291-20701 (Bush).

Genuine Lister new old stock injector clamp for Lister LD, SL, LR, SR, SW, ST, STW, HA, HB, HW, HR, HRW engines, part number 351-10580.

Genuine Lister decompressor lever 351-13550, early brass type, these were later replace by the aluminium type 351-13551, both are interchangeable. Originally fitted to Lister LD, SL, HA, HB and will also fit LR, SR, ST, STW, HR, HRW.

Genuine Lister fuel leak off pipe for SL3, SR3 & Early ST3 air cooled diesel engines (See notes regarding ST3 engines). Lister part number 203-17131, supersedes part number 203-81940.

Genuine Lister Petter oil filler neck 027-06317, used on many Lister engines including LD, SL, LR, SR, HA, HB, HW, ST, STW, HR, HRW, TS, TL & TR. Supersedes 027-03821 & 27-3821.

Lister LR, SR & LD, SL cylinder head cover assembly suitable for 1, 2 & 3 cylinder engines. The assembly comes complete with filler cap and decompression leaver fitted. Lister part number 201-17423, will also replace and supersedes 201-17420.

Genuine new old stock Lister fuel tank filler cap suitable for Lister LD, SL, LR, SR, ST, LT, LV, TS & TR engine mounted fuel tanks. This bayonet style filler cap is the later “non-spill” type, Lister part number 366-00091, comes complete with the 027-06151 joint.

Clockwise rotation flywheel starting ring suitable for Lister LD2, SL2, SL3, LR2, SR2, SR3, ST2 & ST3 diesel engines. Fits 2 & 3 cylinder engines only, not suitable for single cylinder engines. These high quality non-Genuine starting rings are equivalent to Lister 202-12870.

Oil level dipstick for Lister LD1, SL1, LR1, SR1 & ST1 diesel engines where fitted to crankcase door (Identification Mark 17, refer to parts book to verify). This non-genuine aftermarket dipstick is equivalent to Lister part number 570-10211.  

Fuel pump delivery valve holder suitable for CAV, PYROX, Bryce & Bosch PF1A & BPF1A type fuel injector pumps. Genuine CAV, part number 7033-97. Used on a wide range of Lister air cooled engines.

Exhaust/Intake manifold joint suitable for Lister LD, SL, LR & SR engines, this non-Genuine gasket is equivalent to Lister part number 201-11131, can also replace 201-11130 (See notes & refer to image 2).

Exhaust/Intake manifold joint suitable for later Lister SR engines, this non-Genuine gasket is equivalent to Lister part number 201-51040 (See notes & refer to image 2).

Injector washer suitable for Lister LD, SL, LR, SR, HA, HB equivalent to Lister part number 010-03041.

Sold Individually.

Bleed screw or air vent screw suitable for CAV, Bryce, Bosch & Pyrox PF1A, BPF1A, FAOAB, FAOAN type fuel injector pumps, found on many single and multi-cylinder stationary engines including Lister’s and others.

Gromet for leak off pipe (Fuel Tank End) on Lister LD, SL, LR, SR, ST fuel tanks where fitted. This rubber gromet is equivalent to Lister part number 201-11710. For reference, gromet is item #10 in photo.

Genuine Lister anti-clockwise flywheel starting ring for Lister LD2, SL2, SL3, LR2, SR2, SR3, ST2 & ST3 diesel engines. Fits 2 & 3 cylinder engines only, not suitable for single cylinder engines.

Oil bath air filter suitable for Lister LD1, LD2, SL1, SL2 & LR1, LR2, SR1, SR2 engines up to 2000 rpm (Not Suitable for high speed engines running over 2000 rpm). Fits intake manifolds with flanges up to 38mm (1-1/2”).

Genuine Lister Petter air filter element 201-26010, fits Lister LR & SR with dry type air filters. Please refer to the dimensions listed below as a guide to whether this filter element is suitable for your engine.

Cylinder head stud (long) suitable for all Lister ST, LR, SR, LD & SL diesel engines, fits all single and multi-cylinder engines in these models. A high quality non-genuine part equivalent to Lister part number 201-11042. This longer stud comes complete with female threaded end to accept rocker cover stud.

Sold Individually

Cylinder head stud (short) suitable for all Lister ST, LR, SR, LD & SL diesel engines, fits all single and multi-cylinder engines in these models. A high quality non-genuine part equivalent to Lister part number 201-11052.

Sold Individually

Governor weight spring suitable for Lister ST, LR, SR, SL diesel engines. Important: NOT suitable for all engine speeds, see further details below on this page for compatible engines. This non-genuine part is equivalent to Lister part number 201-10820.

Sold Individually

Starter motor distance piece suitable for Lister ST2, ST3, LR2, SR2 & SR3 engines. This non-Genuine part is equivalent to Lister part number 202-26550.

New fuel pipe for connecting between the fuel tank and fuel filter body on Lister LD1, LD2, SL1, SL2, SL3, LR1, LR2, SR1 & SR2 engines. This high quality aftermarket copper pipe is equivalent to Lister part number 201-11674.

Genuine Lister flywheel key to suit all Lister LD, SL, LR, SR engines, single and multi-cylinder. Lister part number 201-26150.

Pair of new fuel tank straps for the smaller 5 Litre (1 Gallon) tanks fitted to Lister LD1, SL1, LR1, SR1 & ST1. These newly made aftermarket straps are made to fit our new 1 Gallon tanks, equivalent to 570-10630, but may not be suitable for some original tanks.

Sold as a pair, 2 x strap assemblies included (As Shown in Photo).