Lister TS, TL & TR

Bare cylinder head cover (No Breather Box) suitable for Lister Petter TS & TR engine with engine mounted fuel tanks, equivalent to Lister Petter part number 201-30798.

Bare cylinder head cover (No Breather Box) suitable for Lister Petter TS2, TS3, TR2, TR3, equivalent to Lister Petter part number 201-30798.

42mm Taper lock bush suitable for the “202-35300 Fenner Type Coupling Assembly” fitted to Lister Petter TS, TR, TL & TX. Equivalent to Lister part number 202-35343.

38mm Taper lock bush suitable for the “202-35300 Fenner Type Coupling Assembly” fitted to Lister Petter TS, TR, TL & TX. Equivalent to Lister part number 202-35344.

New Lucas, Delphi, Stanadyne fuel injector suitable for Lister Petter TR, TL & STW, replaces Lister Petter part number 201-48530, which supersedes 201-47042 & 202-36730. It is recommended that fuel injectors are fitted as a complete set on multi cylinder engines.

Catch pin for starting handle on Lister Petter TS, TR, TL, LT & LV engines. This non-Genuine replacement part is equivalent to Lister Petter part number 201-43040, also replaces 601-39860.

Oil pressure gauge, 0-6 Bar (0-100 PSI), suitable for Lister JP, CD, CE, LD, SL, HA, HB, LR, SR, SW, ST, STW, HR, HRW, TX, TS, TL & TR. These new high quality stainless steel gauges are a suitable replacement for Lister Petter part number 351-15160. Gauge face measures approximately 50mm or 2”, with a bottom fitting ¼” BSPP thread, Glycerine filled.

Genuine Lister Petter exhaust valve stem seal suitable for TS1, TS2, TS3, TL2, TL3, TR1, TR2 & TR3. Part number 201-39520.

Genuine Lister Petter inlet valve stem seal suitable for TS1, TS2, TS3, TL2, TL3, TR1, TR2 & TR3. Part number 201-37630.

Fuel filler cap joint suitable for fuel tank lids fitted to many Lister Petter fuel tanks, including LD, SL, LR, SR, ST and early LT, LV, TX, TL, TS & TR tanks fitted with the 366-00091 style filler cap.  Equivalent to Lister Petter part number 027-06151.

Oil filler cap joint suitable for the oil filler caps fitted to Lister FR, LD, SL, HA, HB, LR, SR, ST, LT, LV, HR, HL, JA, JW, TX, TL, TS, TR. Equivalent to Lister Petter part number 303-00253.

Top rubber cup for the push rod tubes on Lister Petter TS, TR, TL & TX diesel engines, part number 201-30260.

Sold Individually.

Genuine Lister Petter ST & TS cylinder head gasket, suitable for ST1, ST2, ST3, TS1, TS2 & TS3 air cooled diesel engines. Lister part number 201-80210.

Genuine Lister Petter TS, TR & TL cylinder base joint/gasket (copper), fits TS1, TS2, TS3, TR1, TR2, TR3, TL2 & TL3 engines, part number 201-32430.

Sold Individually

Genuine Lister Petter drive member 202-35360 for hydraulic pump adaptor. Please check your current part number if replacing old unit, this 202-35360 may not be compatible with later couplings using the 202-35361 drive member.

Spring Washer used on many Lister Petter models, including TS, TR, LPA, LPW, JA & JW, this non-Genuine part is equivalent to Lister Petter part number 272-00089.

Sold Individually

Flywheel fan cap screw (M8 x 30mm) for Lister Petter TS & TR, this non-Genuine part is equivalent to Lister Petter part number 272-00176.

Sold Individually

Genuine Lister Petter oil filler neck 027-06317, used on many Lister engines including LD, SL, LR, SR, HA, HB, HW, ST, STW, HR, HRW, TS, TL & TR. Supersedes 027-03821 & 27-3821.

Genuine Lister Petter inlet manifold suitable for TS1 & TR1 where an oil bath air filter is required. Lister Petter part number 201-37860, will also replace 201-37861.

Genuine new old stock Lister fuel tank filler cap suitable for Lister LD, SL, LR, SR, ST, LT, LV, TS & TR engine mounted fuel tanks. This bayonet style filler cap is the later “non-spill” type, Lister part number 366-00091, comes complete with the 027-06151 joint.

Oil distribution block assembly suitable for Lister Petter TS, TR, TL & TX. The assembly includes the distribution block, 1 x union, 1 x plug and 2 x copper washers.

Air temperature switch suitable for Lister Petter TS, TR, TL & TX, equivalent to Lister Petter part number 202-45310, also replaces 202-36660. Please refer to image 2 (Item 4) showing this type of switch in use. This is the replacement switch only, Does NOT include bracket or moulded seal.

Inlet & Exhaust manifold suitable for Lister Petter TS1 & TR1 diesel engines. This combined intake and exhaust cast iron manifold can also be used to replace the 2 piece manifolds when an alternative muffler is used. Exhaust thread is 1-1/4” BSP.

Replacement fuel pipe for the connection between the fuel tank and fuel filter on Lister Petter TS1 & TR1 diesel engines (Early Type). This non-Genuine pipe replaces Lister Petter part number 366-07044.

Leak off pipe rubber boot for sealing off last tee piece on Lister Petter T Series engine, including the TS, TL, TX & TR. Equivalent to Lister Petter part number 202-41270.

Injector leak off kit suitable for Lister Petter T Series 2 cylinder engines including TS2, TL2 & TR2. The kit includes 1 meter of high quality cotton over braided rubber fuel line and new brass connection fittings.

Injector leak off kit suitable for Lister Petter T Series 3 cylinder engines including TS3, TL3 & TR3. The kit includes 1 meter of high quality cotton over braided rubber fuel line and new brass connection fittings.

Exhaust/Intake manifold joint suitable for Lister TS, TR & TL engines, this non-Genuine gasket is equivalent to Lister part number 201-33420.

Injector washer suitable for Lister Petter ST, HR, TS, TR & TL, equivalent to Lister part number 351-40230.

Sold Individually.

Genuine Lister Petter swivel union plug for the T Range, including TS, TR, TL & TX. This union distributes oil to the oil distribution block or oil gauge where they need to be fitted. Shown in the second image as item number 1.

Genuine Lister Petter air cowling suitable for TS1 & TR1 Builds 16-18, 101, part number 201-37832. Also replaces 201-37830.

Genuine Lister Petter TS1 & TR1 Inlet manifold, part number 201-37852.

Genuine Lister Petter inlet & exhaust manifold clamping washer for ST2, ST3, TS2, TS3, TR2 & TR3 were fitted. Also used as spacer washer on TS1 fuel filter bracket & 8.25 litre fuel tank mounting.

Genuine Lister Petter TS & TR cable loom for 12V electric start panel with the Nicsa charging system and with provision for two gauges in the panel.

Genuine Lister Petter/Donaldson Pre-cleaner for 6-1/2" Front Mounted Heavy Duty Cyclonic Air Cleaners fitted to TS2, TS3 TR2 & TR3 air cooled diesel engines, part number 382-07900.

Genuine Lister Petter temperature gauge with 6 foot capillary, suitable for a wide range of Lister Petter air cooled diesel engines, including ST, HR, TS, TR, TX, TL, LT & LV. Will also replace 370-12991 & 370-12992.

Replacement fuel pipe for the connection between the fuel lift pump and fuel Agglomerator type fuel filter on Lister Petter TS3 & TR3 diesel engines. This non-Genuine pipe is suited to the Agglomerator type filters only.

Replacement fuel pipe for the connection between the fuel tank and fuel filter on Lister Petter TS & TR diesel engines fitted with engine mounted fuel tank and under tank type filters. This non-Genuine pipe replaces Lister Petter part number 201-46880.

Replacement fuel pipe for the connection between the fuel filter and fuel injector pumps on Lister Petter TS3 & TR3 diesel engines. This non-Genuine pipe is suited to the under tank type filters.

Replacement fuel pipe for the connection between the fuel filter and fuel injector pumps on Lister Petter TS3 & TR3 diesel engines. This non-Genuine pipe is suited to the Agglomerator type filters, and also replaces the earlier pipe with a banjo fitting on the filter end.

Replacement fuel pipe for the connection between the fuel filter and fuel injector pumps on Lister Petter TS2 & TR2 diesel engines. This non-Genuine pipe is suited to the under tank type filters.