Silencers & Mufflers

A new high quality reproduction cast iron and tin muffler to suit the smaller Southern Cross P engines with a 1.25” BSP exhaust thread. These 3 piece mufflers consist of a rolled sheet metal cylinder centre piece between the top and bottom cast iron castings.

A new high quality reproduction cast iron and tin muffler to suit the larger Southern Cross P engines with a 1.5” BSP exhaust thread. These 3 piece mufflers consist of a rolled sheet metal cylinder centre piece between the top and bottom cast iron castings.

A well-made reproduction Ronaldson & Tippett D, G, N, H & K canister style exhaust silencer with cast iron end plates and rolled tin work centre pieces, this high quality muffler will compliment any vintage stationary engine restoration project. Fits over 1” BSP Pipe (No Thread), or any pipe fitting with an approximate 35mm OD or smaller.

Genuine Petter exhaust silencer suitable for PH1, PHW1, AV1, AVA1 and possibly others that will except a 1” BSP male threaded muffler. These are new old stock, they show some signs of long term storage. Petter part number 294158 (JF26).

A new cast iron reproduction muffler for the 3.5 HP Ronaldson & Tippett CH, CM & CR Type diesel engines with a 1.25” BSP exhaust thread.

A new cast iron reproduction muffler for the 3 & 4 HP Ronaldson & Tippett N Type petrol and kerosene engines with a 1” BSP exhaust thread.

A new cast iron reproduction muffler for the 1.5 & 2 HP Ronaldson & Tippett N Type petrol and kerosene engines with a 3/4” BSP exhaust thread.

A new quality reproduction cast iron muffler for the Southern Cross YB diesel engines with a 1.5” BSP exhaust thread.

A new quality reproduction cast iron muffler suitable for the Southern Cross PAA petrol and kerosene engines with a 1.25” BSP exhaust thread.

New cast iron reproduction muffler for the Farm Pump Engine with a 3/4” BSP exhaust thread. Suitable for Southern Cross, Buzacott, Fuller & Johnson and Unbranded Models, these mufflers are bored and threaded with a 3/4 Inch BSP thread and bolted together with period correct single slot headed bolts and square nuts, ready to fit to your engine.

A well-made canister style exhaust silencer suitable for vintage stationary engines, with cast iron end plates and rolled tin work centre, this high quality silencer will compliment any restoration project. Fits over 1” BSP Pipe (No Thread), or any pipe fitting with an approximate 35mm OD or smaller.

A well-made canister style exhaust silencer (Short) suitable for vintage stationary engines, with cast iron end plates and rolled tin work centre, this high quality silencer will compliment any restoration project. Fits over 1” BSP Pipe (No Thread), or any pipe fitting with an approximate 35mm OD or smaller.

New cast iron reproduction muffler for the Farm Pump Engine with a 1/2” BSP exhaust thread. Suitable for Southern Cross, Buzacott, Fuller & Johnson and Unbranded Models, these mufflers are bored and threaded with a 1/2 Inch BSP thread and bolted together with period correct single slot headed bolts and square nuts, ready to fit to your engine.

New cast iron reproduction muffler for Southern Cross AKB & AXC engines with a 1” BSP exhaust thread. These high quality mufflers are bored and threaded with a 1” BSP thread and bolted together with period correct single slot headed bolts and square nuts, ready to fit to your engine.

A well made quality pepper pot style exhaust silencer suitable for Lister CS, Lister L, Lister J, and Lister B type engines, as well as other similar sized engines that require a silencer with a 1.5" BSP thread fitting.

A high quality small stationary engine silencer that would suit a wide range of stationary engines requiring a 1' BSP thread exhaust. This muffler will fit engines such as Lister D, Rosebery/Buzacott, Ronaldson & Tippett and many others.

A high-quality reproduction exhaust silencer for Lister ST1, SR1, LD2 & LR2 engines. These silencers are a copy of the original Lister type, made to original Lister specification, with internal baffles for effective exhaust note silencing.

A high-quality reproduction exhaust silencer for Lister A engines, also known as the Lister Junior. These silencers are a copy of the original Lister type, made to original Lister specification, with internal baffles for effective exhaust note silencing.

A good quality reproduction exhaust silencer for Lister D and DK engines. These silencers have internal baffles for effective exhaust note silencing.

A good quality reproduction exhaust silencer suitable for the Lister D & DK petrol/kero engines and the LD1 diesel engines. These silencers have an internal baffle, so they will be effective in quieting down your engine, as well as looking the part.

A good quality reproduction exhaust silencer for Lister LD1 & LR1 engines. These silencers have internal baffles for effective exhaust note silencing.

Exhaust silencer suitable for 2 & 3 cylinder Lister HA, HB, HW, HR, HRW & JP diesel engines with a 2” BSP thread. Equivalent to Lister Petter part number 011-13062, these high quality reproduction silencers are powder coated in high temp black paint ready for use.

Genuine Lister Petter exhaust silencer to suit TS2, TS3, TR2, TR3 engines, medium duty silencer, part number 203-32561. May require exhaust manifold adaptor if not already fitted.

Genuine Lister Petter AC1 & AD1 acoustic silencer, part number 274706.

Australian made 1” BSP exhaust elbow and socket suitable for many smaller type vintage stationary engines requiring a 1” BSP exhaust bend. These 90 Degree long bends are made from heavy wall pipe, complete with male BSP threads both ends, and the female socket attached to one end allows for easy fitment of a male threaded silencer.

Australian made 1-1/4” BSP exhaust elbow and socket suitable for the Lister Junior A Type and any other engine requiring a 1.25” BSP exhaust bend. These 90 Degree long bends are made from heavy wall pipe, complete with male BSP threads both ends, and the female socket attached to one end allows for easy fitment of a male threaded silencer.