Lister A & AK Junior Piston Ring Set - Later Style 4" Bore
Zoom image

Lister A & AK Junior Piston Ring Set - Later Style 4" Bore


Not rated yet

Good quality piston ring set for Lister A petrol engines and AK petrol/kero engines. This ring set is suiatable for the later Juinor engines with a 4” bore, these engines are usually mark as 3hp or 3-1/2hp. The set consists of 3 compression rings and 1 oil scraper ring to suit a standard 4” bore.

  • $55.00
  • including GST
Qty:  
In stock (22 items available)

Compression Ring Dimensions (A104-16):

  • Bore Size 4” (101.6mm)
  • Axial Width 1/8” (3.175mm)
  • Radial Wall Thickness 0.140” (3.556mm)
  • 3 Per Set

Oil Scraper Ring Dimensions (A104-17):

  • Bore Size 4” (101.6mm)
  • Axial Width 3/16” (4.762mm)
  • Radial Wall Thickness 0.140” (3.556mm)
  • 1 Per Set.


*Radial wall thickness shown is an indication only, this may vary by up to 0.005” depending on stock available at the time. If you require a specific radial thickness, please contact us to discuss your requirements.

CHECK YOUR PISTON & BORE! Remember, many of these engines can be as much as 80 to 100 years old or more, piston ring groves may be worn or may have even been modified in the past. Be sure to check your engines piston and bore for ring suitability before purchasing.

Gap Check Your New Rings: All new rings should to be checked for correct minimum end gap requirement suitable for your engines bore, refer to your workshop manual for original manufactures specifications on correct ring end gap required for your engine. In the absence of the original manufacturer’s specifications please refer to the general information pamphlet that is provided with your new piston rings.

We purchase our new piston rings from several suppliers here in Australia and around the world, as well as purchasing new old stock from closing businesses. Some of our rings are pre gapped, some are not, if you have specific requirements for pre-gapped or ungapped rings please contact us.

Fitting Piston Rings: Using ring expanders is highly recommended to avoid breaking your new rings or causing damage to the piston, please be sure to read the tips and recommendations on the pamphlet provided with your new piston rings.

Quality Guaranteed: Our piston rings have been tried and tested and are constantly quality checked, you can rest assured you are buying a high quality product from O.T.E. Parts Australia.

 

    • Weight
      0.1200 kg
    • SKU
      A104-16/17
Customer reviews
Please sign in to add review
There are no comments yet. Be the first to leave a comment
Customers who bought this product also bought
Customers who viewed this product bought