- Lister Diesel Parts
- Lister CS Parts
- Lister JP, JK, JS
- Lister CD & CE
- Lister FR
- Lister LD & SL
- HA, HB & HW
- Lister LR Parts
- Lister SR Parts
- Lister ST & STW
- HR, HRW & HL
- Air, Oil & Fuel Filters
- Gaskets & Seals
- Piston, Rod, Rings & Cylinder
- Bearings & Bushes
- Cylinder Head & Fittings
- Fuel System & Governor
- Exhaust, Air Cleaners & Manifolds
- Starter Motor & Crank Handle
- Lubricating Oil System
- Crankcase, Crankshaft & Camshaft
- Cooling System (Air & Water)
- Studs, Nuts & Bolts
- Electrical & Gauges
- Accessories & Other Parts
- HR2G & HR3G Gas Engine Parts
- Lister LT & LV
- Lister TS, TL & TR
- Air, Oil & Fuel Filters
- Gaskets & Seals
- Piston, Rod, Rings & Cylinder
- Bearings & Bushes
- Fuel System & Governor
- Exhaust, Air Cleaners & Manifolds
- Lubricating Oil System
- Cylinder Head & Fittings
- Crankcase, Crankshaft & Camshaft
- Electrical & Gauges
- Starter Motor & Crank Handles
- Studs, Nuts & Bolts
- Cooling System (Air & Water)
- Accessories & Other Parts
- Lister Petter TX
- LPA & LPW
- Air, Oil & Fuel Filters
- Gaskets & Seals
- Piston, Rod & Rings
- Bearings & Bushes
- Cylinder Head & Fittings
- Fuel System & Governor
- Exhaust, Air Cleaners & Manifolds
- Starter Motor
- Lubricating Oil System
- Crankcase, Crankshaft & Camshaft
- Cooling System (Air & Water)
- Electrical & Gauges
- Studs, Nuts & Bolts
- Accessories & Other Parts
- JA, JAS, JW & JWS
- CR, CD4/6 & CS4/6
- Vintage Lister Parts
- Petter Engine Parts
- Other Engines
- Piston Rings
- Air, Oil & Fuel Filters
- Fuel Injection Parts
- Gaskets & Gasket Sets
- Silencers & Mufflers
- Books & Manuals
- Transfers & Decals
- Starting Handles
- Nuts, Bolts & Studs
- Oilers & Lubricators
- Magneto & Ignition Parts
- Tools & Supplies
- Cylinder Sleeves
- Belts & Pulleys
- Engine Accessories
Piston, Con Rod & Cylinder
Sort by:Price Low - High
Lister CS Gudgeon Pin Circlips 008-04010 (Pair)
Pair of gudgeon pin circlips for Lister CS 3/1, 3.5/1, 5/1, 6/1, 8/1, 10/2, 12/2 & 16/6 water cooled diesel engines. Equivalent to Lister part number 008-04010 and replaces 8-4-10, 208/216A & 5-1/D10.
Lister CS Water Jacket Door Joint 026-00112 (Pair)
Pair of cylinder water jacket door gaskets suitable for all British built Lister CS engines with the water jacket doors fitted to the cylinder/s. Sold in pairs, 1 pair required for single cylinder engines and 2 pair required for twin cylinder engines.
Lister CS Cylinder Head Locating Washer 008-03024
New non-Genuine locating washer for the cylinder head on all genuine Lister CS engines, 2 of these washers are used to align the cylinder head to the cylinder, often missing or badly rusted.
Sold Individually
Conrod Oil Dipper for Lister CS Single Cylinder Engines
A new connecting rod dipper suitable for all single cylinder English built Lister CS engines, this dipper goes on the bottom of your con rod end cap. The dipper is an essential part for lubricating the engines bottom end and should be positioned so that it is cutting through the oil like a knife.
Lister CS Con Rod End Cap Bolts & Nuts (Pair)
Only 9 left in stockA pair of two new replacement connecting rod end cap bolts, complete with nuts and slit pins. Suit all original Lister CS engine sizes.
Gudgeon Pin to Suit Lister CS 5-1, 6-1, 8-1, 10-2 & 12-2
New replacement gudgeon pin for Lister CS diesel engines with a 4.5” cylinder bore. This precision made aftermarket gudgeon pin is suitable for the Lister CS 5-1, 6-1, 8-1, 10-2, 12-2 and 16-2 engines.
Equivalent to Lister part numbers 008-00431, 8-4-3-1, 8-4-3A, 5-1/D3A
Lister CS Connecting Rod Bush (Small End) for 5-1, 6-1, 8-1 & Twins
Lister CS bronze small-end (connecting rod) bush, equivalent to Lister part number 008-00471, 5-1/D7A or 8-4-7-1. This bush will fit all CS and engines with a 4.5" bore, including 5-1, 6-1, 8-1, 10-2, 12-2 and 16-2.
Lister CS Gudgeon Pin Suit 3-1 & 3.5-1
New replacement gudgeon pin for Lister CS 3-1 & 3.5-1 diesel engines with a 3.75” cylinder bore.
Equivalent to Lister part numbers 208-00015, 208-15, 208/15
Lister CS Connecting Rod Bush (Small End) for 3-1 & 3.5-1
Lister CS 3-1 & 3.5-1 bronze small-end (connecting rod) bush, equivalent to Lister part number 208-00019 or 208-19. This bush will fit CS engines with a 3.75" bore, including 3-1 & 3.5-1.
Lister CS & VA 2.5" Connecting Rod Bearing/Big End - 574-10320
High quality clean white metal conrod bearing shells to replace your original Lister CS & VA big end bearings. These non-genuine coenecting rod bearings are available in standard size for 2.5' crankpin or undersized in 10 thou increment for where your crank has worn and had a regrind. Select size when ordering.
Lister CS 3-1 & 3.5-1 Piston Ring Set 574-10960
Set of new high quality replacement piston rings suitable for Lister CS 3-1 & 3.5-1 engines with a 3.75' (95.25mm) bore. Available in Standard and oversizes, select size required when ordering.
Lister CS Cylinder Studs - 3/4" Whitworth x 17" Long (Set of 4)
A set of 4 Lister CS cylinder/cylinder head studs, these are the 4 main corner studs that screw into the crankcase, each stud is 17" long and threaded at both ends with 3/4” BSW threads. Equivalent to Lister part number 027-00861 x 4.
Lister CS Piston Ring Set 4.5 Inch Non Genuine
High quality new set of replacement piston rings suitable for Lister CS 5-1, 6-1, 10-2 or 12-2 engines with a 4.5" (114.3mm) bore, P/N 574-10970. Available in STD size or + 0.010 Oversize.
Lister CS 8/1 & 16/2 Piston Ring Set 4.5” STD P/N 574-10990 Non-Genuine
These non-genuine high quality piston ring sets are suitable for the later Lister CS 6/1, 8/1, 12/2 & 16/2 engines with a 4 ring Aluminium piston (P/N 008-04025) and a non-chrome cylinder block (P/N 574-11001). Note: There rings are NOT suitable for a chrome bore, the top piston ring is chrome plated for use in an unchromed bore only.
Lister CS 8/1 & 16/2 Piston Ring Set 4.5” STD P/N 574-10980 Non-Genuine
These non-genuine high quality piston ring sets are suitable for the later Lister CS 6/1, 8/1, 12/2 & 16/2 engines with a 4 ring Aluminium piston (P/N 008-04025) and a chrome cylinder block (P/N 574-11000). Note: These rings are suitable for chrome plated cylinder bores.
Lister CS 2.25" Big End/Conrod Bearing Shells (Early 3/1)
New high quality white metal bearing shells for early Lister CS 3/1 engines with a 2.25" crank pin. These bearing shells are steel backed, not bronze like the originals, however it does the same job. Available in std or oversized in 10 thou increments for where your crank has worn and had a regrind.
- 25% off
Lister CS Aluminium Piston Set 4.5" (3+2)
New high quality replacement Aluminium piston for use in both genuine Lister CS and Indian Listeroid engines with a 4.5" (114.3mm) bore. Tried and tested in genuine Lister 6-1 engines with good feedback.
Chrome Repair Sleeve/Liner Suit 4.5” Bore for Lister CS 5-1, 6-1, 8-1 & Twins
Chrome 4.5" cylinder liner or repair sleeve also known as a dry sleeve for the Lister CS 5-1, 6-1, 8-1, 10-2, 12-2 & 16-2. May not be suitable for barrels that have had previous liner fitted, please see details of dimensions below.
Lister CS Connecting Rod 6/1, 8/1, 12/2 574-10460
Connecting rod assembly suitable for Lister CS 5/1, 6/1, 8/1, 10/2 and 12/2 (Not suitable for 3/1 and 3.5/1 engines). This high quality aftermarket con rod comes complete with bronze small end bush (Fitted & Reamed), and the end cap with bolts and nuts.
Repair Sleeve/Liner Suit 3.75” Bore for Lister CS 3-1 & 3.5-1
Out of stockA very high quality 3.75" cylinder liner or repair sleeve also known as a dry sleeve for the Lister CS 3-1 and 3.5-1. Will also suit any other vintage stationary engine with a 3.75” bore needing a sleeve fitted. Available in 2 wall thicknesses depending on if you barrel has been repaired before, please see details of dimensions below.
Lister CS 5-1, 6-1, 10-2 & 12-2 Cast Iron Piston Assembly 574-10340 STD
A brand-new high-quality non-genuine cast iron piston assembly suitable for use in original english built Lister CS 5/1, 6/1, 10/2 & 12/2 engines with a standard 4.5" (114.3mm) bore diameter. The piston assembly comes complete with high quality standard piston rings, gudgeon pin and new circlips.
Lister CS 8/1 Aluminium Piston Assembly P/N 574-10350
Lister CS aluminium piston assemblies suitable for 8/1 and 16/2 genuine Lister engines. These high-quality aftermarket piston assemblies are available in Standard (STD) to suit 4.5" bore, and 0.020”, 0.040” & 0.060” oversize, please select size required when ordering.
- 20% off
Lister CS 3/1 & 3.5/1 Piston Assy 574-10770 (STD & Oversize)
A new high quality piston assembly to suit Lister CS 3HP and 3-1/2HP engines with a 3.75” bore. The assembly comes complete with new piston rings, gudgeon pin and circlips to suit. Available in STD or 0.020” and 0.040” oversize, select size required when ordering.
- New!
Lister CS Connecting Rod 3/1 & 3.5/1 574-10300
Out of stockConnecting rod assembly suitable for Lister CS 3/1 & 3.5/1 engines. This high quality aftermarket con rod comes complete with bronze small end bush (Fitted & Reamed), and the end cap with bolts and nuts.
Repair Sleeve/Liner Suit 4.5” Bore for Lister CS 5-1, 6-1, 8-1 & Twins
A very high quality 4.5" cylinder liner or repair sleeve also known as a dry sleeve for the Lister CS 5-1, 6-1, 8-1, 10-2, 12-2 & 16-2. Will also suit any other vintage stationary engine with a 4.5” bore needing a sleeve fitted. Available in 3 wall thicknesses depending on if you barrel has been repaired before, please see details of dimensions below.
Lister CS Replacement 7 Stud Cylinder with Chrome 4.5" Bore
Out of stockA good quality reproduction Lister CS cylinder barrel with a chrome lined 4.5" bore, suitable for original British built *5/1, 6/1, 8/1, *10/2, 12/2 & 16/2 engines. These cylinders are supplied fully machined and ready to fit to your engine.