HA, HB & HW

Exhaust silencer suitable for 2 & 3 cylinder Lister HA, HB, HW, HR, HRW & JP diesel engines with a 2” BSP thread. Equivalent to Lister Petter part number 011-13062, these high quality reproduction silencers are powder coated in high temp black paint ready for use.

Genuine Lister HA2, HA3, HB2, HB3, HR2, HR3, HRW2, & HRW3 lubricating oil pump assembly for Anti-Clockwise engines. Lister part number 572-11740.

Fuel injector oil seal O ring suitable for Lister LD, SL, LR, SR, HA & HB diesel engines, equivalent to Lister part number 201-11080.

Sold Individually

Genuine Lister fuel pump clamp for Lister LD, SL, LR, SR, SW, ST, STW, HA, HB, HW, HR, HRW engines, part number 201-11540.

Oil pressure gauge, 0-6 Bar (0-100 PSI), suitable for Lister JP, CD, CE, LD, SL, HA, HB, LR, SR, SW, ST, STW, HR, HRW, TX, TS, TL & TR. These new high quality stainless steel gauges are a suitable replacement for Lister Petter part number 351-15160. Gauge face measures approximately 50mm or 2”, with a bottom fitting ¼” BSPP thread, Glycerine filled.

New flywheel retaining screw/bolt for Lister Petter HR, HRW, HA, HB, HW, suitable for 2 & 3 cylinder engines only. Equivalent to Lister Petter part number 351-11280.

Big end/conrod bearing shell set suitable for Lister HA HW HB air cooled diesel engines, each set includes 2x 291-50040 equivalent bearing halves. Set (Pair) in a blister pack is equivalent to Lister Part Number: 572-11940. Available in STD and Oversize, select size from drop down menu below.

High quality non-Genuine centre bearing for Lister HA2, HA3 & HB2, HB3 engines and main bearing for HA4 to 6 & HB4 to 6 cylinder engines. The bearing comprises of 2 half’s, equivalent to part numbers 352-32451 (Top) and 352-32461 (Bottom). Available in STD and Oversize, select size from drop down menu when ordering.

High quality non-Genuine crankshaft main bearing for Lister HA2, HA3 & HB2, HB3 engines. The bearing comprises of 2 half’s, equivalent to part numbers 351-16201 (Top) and 351-16191 (Bottom). Available in STD and Oversize, select size from drop down menu when ordering.

Genuine governor adjusting screw for Lister HA2, HA3, HB2, HB3, HW2 & HW3 engines running between 1080 and 2200 rpm, part number 351-11250.

Bleed screw or air vent screw suitable for CAV, Bryce, Bosch & Pyrox PF1A, BPF1A, FAOAB, FAOAN type fuel injector pumps, found on many single and multi-cylinder stationary engines including Lister’s and others.

Genuine new old stock Lister Petter fuel pipe for the connecting between the fuel filter and pumps on HA2, HB2, HR2, HW2, HRW2 diesel engines. Lister part number 352-28720.

Injector washer suitable for Lister LD, SL, LR, SR, HA, HB equivalent to Lister part number 010-03041.

Sold Individually.

Exhaust/Intake manifold joint suitable for Lister HA, HB & HR engines, this non-Genuine gasket is equivalent to Lister part number 351-11611.

Fuel pump delivery valve holder suitable for CAV, PYROX, Bryce & Bosch PF1A & BPF1A type fuel injector pumps. Genuine CAV, part number 7033-97. Used on a wide range of Lister air cooled engines.

Genuine rubber joint for top of fuel pump housing to cylinder head top plate on 2 & 3 cylinder Lister HA, HB, HW, HR & HRW, and joint for push rod tube sealing plate on 4 & 6 cylinder HA, HB, HR, HRW & HS engines.

Sold Individually.

Genuine Lister Petter oil filler neck 027-06317, used on many Lister engines including LD, SL, LR, SR, HA, HB, HW, ST, STW, HR, HRW, TS, TL & TR. Supersedes 027-03821 & 27-3821.

Genuine Lister decompressor lever 351-13550, early brass type, these were later replace by the aluminium type 351-13551, both are interchangeable. Originally fitted to Lister LD, SL, HA, HB and will also fit LR, SR, ST, STW, HR, HRW.

Genuine Lister new old stock injector clamp for Lister LD, SL, LR, SR, SW, ST, STW, HA, HB, HW, HR, HRW engines, part number 351-10580.

Genuine Lister valve rocker lever complete with bush for Lister HA, HB & HW diesel engines. Lister part number 351-10290 (Lever) & 291-20701 (Bush).

Genuine Lister fuel leak off pipe for HR3, HRW3, Lister part number 353-36310. Also a suitable for replacement for HA3, HB3 & HW3, supersedes part numbers 353-13740, 353-13741, 353-13742 & 353-13745.

Genuine Lister HA, HB & HW cylinder head gasket, suitable for all 2, 3, 4 & 6 cylinder engines in these models, Lister part number 351-10380.

Sold Individually

Genuine Lister HA, HB, HW cylinder head shims, suitable for all 2, 3, 4 & 6 cylinder engines in these models, Lister part number 351-10370. These shims are available in 0.003” thick only.

Sold Individually.

Genuine Lister Petter HA, HB, HR, HRS, HL cylinder base gasket, suitable for all 2, 3, 4 & 6 cylinder engines in these models, including turbo engines, Lister part number 351-10390.

Sold Individually

Oil filler cap joint suitable for the oil filler caps fitted to Lister FR, LD, SL, HA, HB, LR, SR, ST, LT, LV, HR, HL, JA, JW, TX, TL, TS, TR. Equivalent to Lister Petter part number 303-00253.

Genuine push rod rubber seal for both top and bottom of push rod tubes on 4 & 6 cylinder Lister HA, HB, HR, HW, HRW, JA & JW diesel engines and all HL engines, part number 354-18830.

Sold Individually.

Genuine Lister fuel pump tappet cap for 2 & 3 cylinder HA, HB, HR & HRW diesel engines, Lister part number 201-11441. Refer to image 2 for location of this item.

Sold Individually.

Genuine Lister head stud (Long) suitable for Lister HA, HB, HW, HR & HRW, the stud is approximately 380mm long. Lister part number 351-10250, will also replace 351-60560.

Genuine Lister head stud (Short) suitable for Lister HA, HB, HW, HR & HRW, the stud is approximately 340mm long. Lister part number 351-10240, will also replace 351-60570.

Swivel union plug (Banjo Bolt) used on the fuel system of many Lister engines including LD, SL LR, SR, ST, HA, HB, HR, CS, LPA, LPW, TS, TR. These are quality made 1/4” BSP non-Genuine banjo bolts equivalent to Lister part number 201-15400 (Steel).

Swivel union plug (Banjo Bolt) used for connecting the fuel pipes to CAV fuel filters on Lister Petter HA, HB, ST, HR, TS, TR, LPW, LPW, JA, HW and others. This 1/2″ - 20 UNF steel swivel union plug is equivalent to Lister Petter part number 354-28380. See item 66 in illustration for fitting location and filter type this plug is suitable for.

Lister LD, SL, LR, SR, ST, HA, HB, HW decompression lever shaft assembly suitable for 1, 2 & 3 cylinder engines. Equivalent to Lister part numbers 201-10950 (Shaft), 201-10960 (Screw) & 270-00002 (Nut).

New Lister HA & HB cylinder barrel, suitable for all HA & HB 2, 3, 4, & 6 cylinder engines. These high quality non-genuine liners are equivalent to Lister Petter part number 351-10274.

New high quality non-Genuine piston assembly to suit Lister Petter HA, HB & HW engines, suitable for all 2, 3, 4 & 6 cylinder engines in this range. Available in Standard & Oversize, select size required when ordering.

Genuine Lister Petter HA, HB & HW piston ring set part number 572-11930. This ring set is suitable for 2, 3, 4 & 6 cylinder HA, HB & HW engines. Available in standard to suit 4.00” (101.6mm) bore and oversize, select size required when ordering.

Lister HA, HB, HS, HW & HWS piston ring sets, suitable for all 2, 3, 4 & 6 cylinder engines in both the air cooled and water cooled ranges. These high quality non-genuine piston ring sets are equivalent to Lister part number 572-11930, /010, /020, /030 & /040. Available in standard to suit 4” bore & oversizes up to 0.040”. Select size required when ordering.

Genuine Lister big end bearing shell set for Lister HA HW HB air cooled diesel engines, each set includes 2x 291-50040 bearing halves. Set (Pair) in blister pack equates to Lister Part Number: 572-11940. Available in STD and Oversize, select size from drop down menu below.

Genuine Lister centre bearing for HA2, HA3 & HB2, HB3 engines and main bearing for HA4 to 6 & HB4 to 6 cylinder engines. The bearing comprises of 2 half’s, part number 352-32451 (Top) and 352-32461 (Bottom). Available in STD and Oversize, select size from drop down menu when ordering.

Thrust washer set (4 pieces) suitable for Lister HA2, HA3 & HB2, HB3 diesel engines. A high quality non-genuine set equivalent to Lister part number 351-10870 x 2. You receive 2 complete thrust washers in this set, or 4 halves as shown in photos, enough for 1 engine.

Lister HA, HB & HW small end bush, part number 291-50080. Available in Genuine and OEM quality non-Genuine equivalent, select type required when ordering.

Genuine Lister LD, SL, LR, SR, HA, HB & FR rocker bush, Lister part number 291-20701.

Phosphor bronze camshaft bush set suitable for Lister HR2, HA2 & HB2 diesel engines. This non-genuine set includes bush’s equivalent to Lister Petter part number 202-12030 x 2.

Phosphor bronze camshaft bush set suitable for Lister HR3, HA3 & HB3 diesel engines. This non-genuine set includes bush’s equivalent to Lister Petter part number 202-12030 x 3.

Phosphor bronze camshaft bush suitable for Lister HA, HB, HR, LD, SL, LR, SR, ST, TS & TR. Please refer your manual or the details below on this page for each engine models requirements. This bush is equivalent to Lister part number Lister 202-12030.

Sold Individually

Genuine Lister camshaft bearing to suit HA2, HA2, HB2, HB3, HR2, HR3, HRW2, & HRW3, Lister part number 351-10172.

HDF296 type diesel filter element, suitable for ST3, TS, TL, TR, HA, HB, HS, HR, HRW, HRWS, HL, HLT, JA, JAS, JW, JWS, JWSC fitted with filter housing 354-28360. Note: For HA2/3 from engine numbers 3295HA212, 2294HA312. Equivalent to Lister Petter part number 351-29760.

Genuine Lister Petter HA, HR4/6, HRW4/6, HRS, HL4/6, HLT6 oil filter element, part number 291-40910.

RYCO air filter element suitable for Lister HA, HB, HR2/3 engines. Please refer to the dimensions listed below as a guide to whether this filter element is suitable for your engine.