HR, HRW & HL

Exhaust silencer suitable for 2 & 3 cylinder Lister HA, HB, HW, HR, HRW & JP diesel engines with a 2” BSP thread. Equivalent to Lister Petter part number 011-13062, these high quality reproduction silencers are powder coated in high temp black paint ready for use.

Genuine Lister fuel pump tappet assembly for LD, SL, LR, SR, SW, ST, STW, HA, HB, HW, HR, HRW diesel engines. Lister part number 570-10030.

Genuine Lister fuel pump clamp for Lister LD, SL, LR, SR, SW, ST, STW, HA, HB, HW, HR, HRW engines, part number 201-11540.

New flywheel retaining screw/bolt for Lister Petter HR, HRW, HA, HB, HW, suitable for 2 & 3 cylinder engines only. Equivalent to Lister Petter part number 351-11280.

Genuine valve spring carrier for Lister Petter HR2, HR3, HR4, HR6 & HRW’s, Lister Petter part number 351-50570.

Genuine Lister Petter temperature gauge with 6 foot capillary, suitable for a wide range of Lister Petter air cooled diesel engines, including ST, HR, TS, TR, TX, TL, LT & LV. Will also replace 370-12991 & 370-12992.

Genuine new old stock Lister Petter air filter element 382-07903, suitable for air filters found on Lister Petter HL6 & CS6 diesel engines.

Genuine new old stock Lister Petter fuel pipe for the connecting between the fuel filter and pumps on HA2, HB2, HR2, HW2, HRW2 diesel engines. Lister part number 352-28720.

Injector washer suitable for Lister Petter ST, HR, TS, TR & TL, equivalent to Lister part number 351-40230.

Sold Individually.

Exhaust/Intake manifold joint suitable for Lister HA, HB & HR engines, this non-Genuine gasket is equivalent to Lister part number 351-11611.

Exhaust manifold to flange joint suitable for Lister Petter HR engines, this non-Genuine gasket is equivalent to Lister part number 292-21020.

Genuine cylinder head cover joint suitable for Lister Petter HL engines, Lister Petter part number 351-55992.

Fuel pump delivery valve holder suitable for CAV, PYROX, Bryce & Bosch PF1A & BPF1A type fuel injector pumps. Genuine CAV, part number 7033-97. Used on a wide range of Lister air cooled engines.

Genuine rubber joint for top of fuel pump housing to cylinder head top plate on 2 & 3 cylinder Lister HA, HB, HW, HR & HRW, and joint for push rod tube sealing plate on 4 & 6 cylinder HA, HB, HR, HRW & HS engines.

Sold Individually.

Genuine Lister Petter oil filler neck 027-06317, used on many Lister engines including LD, SL, LR, SR, HA, HB, HW, ST, STW, HR, HRW, TS, TL & TR. Supersedes 027-03821 & 27-3821.

Genuine Lister new old stock injector clamp for Lister LD, SL, LR, SR, SW, ST, STW, HA, HB, HW, HR, HRW engines, part number 351-10580.

Genuine Lister fuel leak off pipe for HR3, HRW3, Lister part number 353-36310. Also a suitable for replacement for HA3, HB3 & HW3, supersedes part numbers 353-13740, 353-13741, 353-13742 & 353-13745.

Genuine Lister Petter HR, HRS, HL cylinder head gasket, suitable for all 2, 3, 4 & 6 cylinder engines in these models, including turbo engines, Lister part number 351-50181.

Sold Individually

Genuine Lister HR, HRS, HL cylinder head shims, suitable for all 2, 3, 4 & 6 cylinder engines in these models, Lister part numbers 351-50191 & 351-50192. These shims are available in 0.004” & 0.010” thick, select thickness required when ordering.

Sold Individually.

Genuine Lister Petter HA, HB, HR, HRS, HL cylinder base gasket, suitable for all 2, 3, 4 & 6 cylinder engines in these models, including turbo engines, Lister part number 351-10390.

Sold Individually

Genuine Lister HRW cylinder head gasket, suitable for HRW2, HRW3, HRW4 & HRW6 water cooled diesel engines only. Lister part number 351-60020.

Sold Individually

Genuine Lister HRW cylinder head shims, suitable for HRW2, HRW3, HRW4 & HRW6 water cooled diesel engines only. Lister part numbers 351-60030 (0.076mm or 0.003”) & 351-60031 (0.254mm or 0.010”). These shims are available in 0.003” & 0.010” thick, select thickness required when ordering.

Sold Individually.

Genuine Lister HRW cylinder base gasket, suitable for HRW2, HRW3, HRW4 & HRW6 water cooled diesel engines only, Lister part number 351-40081, supersedes 351-40080.

Sold Individually

Genuine Lister HRW & HW cylinder blook door gasket suitable for 2, 3, 4 & 6 cylinder engines in this range, Lister part number 351-40070.

Genuine Lister Ferrule Joint Ring for Lister HRW, STW, SW, HW & JW engines, part number 351-40130. This cylinder head joint ring is used for sealing the water passages between the cylinder barrel and cylinder head on a wide range of water cooled Lister diesel engines.

Oil filler cap joint suitable for the oil filler caps fitted to Lister FR, LD, SL, HA, HB, LR, SR, ST, LT, LV, HR, HL, JA, JW, TX, TL, TS, TR. Equivalent to Lister Petter part number 303-00253.

Genuine push rod rubber seal for both top and bottom of push rod tubes on 4 & 6 cylinder Lister HA, HB, HR, HW, HRW, JA & JW diesel engines and all HL engines, part number 354-18830.

Sold Individually.

Genuine Lister fuel pump tappet cap for 2 & 3 cylinder HA, HB, HR & HRW diesel engines, Lister part number 201-11441. Refer to image 2 for location of this item.

Sold Individually.

Genuine Lister head stud (Long) suitable for Lister HA, HB, HW, HR & HRW, the stud is approximately 380mm long. Lister part number 351-10250, will also replace 351-60560.

Genuine Lister head stud (Short) suitable for Lister HA, HB, HW, HR & HRW, the stud is approximately 340mm long. Lister part number 351-10240, will also replace 351-60570.

Genuine Lister HR3 intake manifold with downward facing intake, part number 353-57161.

Fuel lift pump suitable for replacing Lister Petter part numbers 351-12151, 352-83780, 572-71981, 572-71982. This type of lift pump is fitted to many Lister Petter diesel engines including the HR2, HR3, HRW2/3, HRWM2/3, SRM2/3/4 models.

Thermostat suitable for Lister STW, HRW, SW, HW, JW, Early LPW engines requiring a 74 degree thermostat. Equivalent to Lister part number 354-44070, replaces 010-02290, 331511, 354-44072, 354-44071.  For suitability, see notes below or refer to your service manual. If in doubt, please ask before purchasing.

Exhaust/Intake manifold joint suitable for Lister HW & HRW water cooled diesel engines, Lister part number 352-40311.

Genuine Exhaust/Intake manifold gasket suitable for Lister HL4 & HL6 diesel engines, Lister part number 356-59080.

Swivel union plug (Banjo Bolt) used for connecting the fuel pipes to CAV fuel filters on Lister Petter HA, HB, ST, HR, TS, TR, LPW, LPW, JA, HW and others. This 1/2″ - 20 UNF steel swivel union plug is equivalent to Lister Petter part number 354-28380. See item 66 in illustration for fitting location and filter type this plug is suitable for.

Decompressor lever, later aluminium type equivalent to Lister Petter 351-13551, commonly fitted to Lister LR, SR, ST, STW, HR & HRW. These well-made non-Genuine decomp levers are Nikel plated and come complete with a mills pin for fitting.

Genuine new old stock Lister HL3 camshaft, Lister part number 353-70691.

New Lister Petter HR & HL cylinder barrel, suitable for all HR 2, 3, 4, & 6 cylinder engines. These high quality non-genuine liners are equivalent to Lister Petter part number 353-80971.

European quality made non-Genuine piston assemblies to suit Lister Petter HR engines, suitable for all 2, 3, 4 & 6 cylinder engines running up to 1800 RPM in this range. Available in Standard to suit 4.25” bore and in 0.020”, 0.030" & 0.040” oversize, select required size when ordering.

Genuine new old stock Lister Petter HR, HRW & HL piston assemblies suitable for 2, 3, 4 & 6 cylinder engines. Part number 572-50122 in standard size only. Please see notes regarding HL & HRS engines below. Available in Standard to suit 4.25” bore and in 0.020” & 0.040” oversize, select required size when ordering.

Genuine Lister Petter HL 0.030” oversize piston assembly, part number 572-55250/030.

Genuine Lister Petter HL 0.040” oversize piston assembly, part number 572-55250/040.

Genuine Lister Petter HRS & HRWS standard size piston assembly, part number 572-50141.

Lister HR, HRS, HRW, HRWS piston ring sets, suitable for all 2, 3, 4 & 6 cylinder engines in both the air cooled and water cooled ranges. These high quality non-genuine piston ring sets are equivalent to Lister part number 572-50622, /010, /020, /030 & /040. Available in standard to suit 4.25” bore & oversizes up to 0.060”. Select size required when ordering.

Genuine Lister Petter HR piston ring set part number 572-50622. This 5 Ring Set *suitable for 2, 3, 4 & 6 cylinder HR, HL, HRS, HRW, HRWS engines. Available in standard to suit 4.25” bore and oversize, select size required when ordering.

Genuine Lister Petter HL piston ring set in 0.020” oversize. Lister Petter P/N 572-50628/020
Suitable for high speed engines running over 1800 r/min.

Genuine Lister big end bearings for HR & HRW diesel engines. Available in STD and Oversize, select size from drop down menu below.