Lister LR Parts

A high-quality reproduction exhaust silencer for Lister ST1, SR1, LD2 & LR2 engines. These silencers are a copy of the original Lister type, made to original Lister specification, with internal baffles for effective exhaust note silencing.

A good quality reproduction exhaust silencer for Lister LD1 & LR1 engines. These silencers have internal baffles for effective exhaust note silencing.

Genuine Lister fuel pump tappet assembly for LD, SL, LR, SR, SW, ST, STW, HA, HB, HW, HR, HRW diesel engines. Lister part number 570-10030.

Cylinder head cover joint suitable for Lister Petter LD, SL, LR & SR engines, this non-Genuine gasket is equivalent to Lister part number 201-10510.

Lister LD, SL, LR, SR & ST fuel pump housing joint to top plate, equivalent to Lister part number 201-11413.

Sold Individually

Genuine Lister fuel pump clamp for Lister LD, SL, LR, SR, SW, ST, STW, HA, HB, HW, HR, HRW engines, part number 201-11540.

Genuine Lister swivel union plug (Brass), Lister part number 201-15400. Used on the fuel system of many Lister models including the LD, SL, LR, SR, ST and others.

Oil bath air filter suitable for Lister LD1, LD2, SL1, SL2 & LR1, LR2, SR1, SR2 engines up to 2000 rpm (Not Suitable for high speed engines running over 2000 rpm). Fits intake manifolds with flanges up to 38mm (1-1/2”).

Genuine Lister anti-clockwise flywheel starting ring for Lister LD2, SL2, SL3, LR2, SR2, SR3, ST2 & ST3 diesel engines. Fits 2 & 3 cylinder engines only, not suitable for single cylinder engines.

Gromet for leak off pipe (Fuel Tank End) on Lister LD, SL, LR, SR, ST fuel tanks where fitted. This rubber gromet is equivalent to Lister part number 201-11710. For reference, gromet is item #10 in photo.

Bleed screw or air vent screw suitable for CAV, Bryce, Bosch & Pyrox PF1A, BPF1A, FAOAB, FAOAN type fuel injector pumps, found on many single and multi-cylinder stationary engines including Lister’s and others.

Injector washer suitable for Lister LD, SL, LR, SR, HA, HB equivalent to Lister part number 010-03041.

Sold Individually.

Exhaust/Intake manifold joint suitable for Lister LD, SL, LR & SR engines, this non-Genuine gasket is equivalent to Lister part number 201-11131, can also replace 201-11130 (See notes & refer to image 2).

Fuel pump delivery valve holder suitable for CAV, PYROX, Bryce & Bosch PF1A & BPF1A type fuel injector pumps. Genuine CAV, part number 7033-97. Used on a wide range of Lister air cooled engines.

Oil level dipstick for Lister LD1, SL1, LR1, SR1 & ST1 diesel engines where fitted to crankcase door (Identification Mark 17, refer to parts book to verify). This non-genuine aftermarket dipstick is equivalent to Lister part number 570-10211.  

Clockwise rotation flywheel starting ring suitable for Lister LD2, SL2, SL3, LR2, SR2, SR3, ST2 & ST3 diesel engines. Fits 2 & 3 cylinder engines only, not suitable for single cylinder engines. These high quality non-Genuine starting rings are equivalent to Lister 202-12870.

Genuine new old stock Lister fuel tank filler cap suitable for Lister LD, SL, LR, SR, ST, LT, LV, TS & TR engine mounted fuel tanks. This bayonet style filler cap is the later “non-spill” type, Lister part number 366-00091, comes complete with the 027-06151 joint.

Lister LR, SR & LD, SL cylinder head cover assembly suitable for 1, 2 & 3 cylinder engines. The assembly comes complete with filler cap and decompression leaver fitted. Lister part number 201-17423, will also replace and supersedes 201-17420.

Genuine Lister Petter oil filler neck 027-06317, used on many Lister engines including LD, SL, LR, SR, HA, HB, HW, ST, STW, HR, HRW, TS, TL & TR. Supersedes 027-03821 & 27-3821.

Genuine Lister decompressor lever 351-13550, early brass type, these were later replace by the aluminium type 351-13551, both are interchangeable. Originally fitted to Lister LD, SL, HA, HB and will also fit LR, SR, ST, STW, HR, HRW.

Genuine Lister new old stock injector clamp for Lister LD, SL, LR, SR, SW, ST, STW, HA, HB, HW, HR, HRW engines, part number 351-10580.

Genuine Lister LD & LR cylinder head gasket, suitable for LD1, LD2, LR1 & LR2 air cooled diesel engines, Lister part number 201-10382. Available in copper from our vintage stock or the later steel version, select preference when ordering.

Sold Individually

Genuine Lister LD & LR cylinder head shim, suitable for LD1, LD2, LR1 & LR2, Lister part number 201-12300. The shim is 0.003” thick, use as many or as few as you need in combination with the head gasket to set the correct cylinder head bump clearance.

Sold Individually.

Fuel pump housing door gasket suitable for Lister LD1, SL1, LR1, SR1, SW1 & ST1, equivalent to Lister part number 201-11581.

Oil filler cap joint suitable for the oil filler caps fitted to Lister FR, LD, SL, HA, HB, LR, SR, ST, LT, LV, HR, HL, JA, JW, TX, TL, TS, TR. Equivalent to Lister Petter part number 303-00253.

Fuel filler cap joint suitable for fuel tank lids fitted to many Lister Petter fuel tanks, including LD, SL, LR, SR, ST and early LT, LV, TX, TL, TS & TR tanks fitted with the 366-00091 style filler cap.  Equivalent to Lister Petter part number 027-06151.

Genuine Lister fuel pump tappet cap for LD, SL, LR, SR, ST & STW diesel engines, Lister part number 201-11440. Refer to image 2 for location of this item.

Sold Individually.

Lister LD, SL, LR & SR cylinder head nut washer, also used in various other applications on a number of other Lister Petter engines, including but not limited to starter motor nut washers on some models etc. Lister part number 027-00545.

Sold Individually.

New precision made gudgeon pin suitable for Lister LD1, LD2, LR1 & LR2 engines, this high quality non-Genuine part is equivalent to Lister part number 201-10090.

Pair of gudgeon pin circlips suitable for Lister LD1, LD2, LR1 & LR2 engines, equivalent to Lister part number 201-10100 x 2.

Swivel union plug (Banjo Bolt) used on the fuel system of many Lister engines including LD, SL LR, SR, ST, HA, HB, HR, CS, LPA, LPW, TS, TR. These are quality made 1/4” BSP non-Genuine banjo bolts equivalent to Lister part number 201-15400 (Steel).

Fuel injector leak off pipe suitable for Lister ST2, LR2 & SR2, a well-made non-Genuine assembly equivalent to Lister part number 202-17131.

Clockwise rotation flywheel starting ring suitable for Lister LD1, SL1, LR1, SR1, ST1 diesel engines. Fits single cylinder engines only, not suitable for multi-cylinder engines. Lister part number 201-12870.

Decompressor lever, later aluminium type equivalent to Lister Petter 351-13551, commonly fitted to Lister LR, SR, ST, STW, HR & HRW. These well-made non-Genuine decomp levers are Nikel plated and come complete with a mills pin for fitting.

Lister LD, SL, LR, SR, ST, HA, HB, HW decompression lever shaft assembly suitable for 1, 2 & 3 cylinder engines. Equivalent to Lister part numbers 201-10950 (Shaft), 201-10960 (Screw) & 270-00002 (Nut).

Genuine Lister phosphor bronze camshaft bush (Flywheel End) suitable for Lister LD, SL, LR, SR & SW engines. Lister part number 201-10190.

Sold Individually

Genuine piston assembly for Lister LR1 & LR2 engines. The assembly includes piston, ring set, gudgeon pin and cir-clips. Lister part number 570-11308, available in Standard size only.

New standard size cylinder to suit the Lister LR range of engines with a 3” (76.2mm) bore. These high quality non-Genuine liners are equivalent to Lister Petter part number 201-70110.

New standard size cylinder and piston kit to suit the Lister LR range of engines with a 3” (76.2mm) bore. The kit comprises of the new standard size cylinder equivalent to P/N 201-70110 and a new standard size piston assembly equivalent to Lister P/N 570-11308.

A new high quality non-genuine piston assembly for Lister Petter LR engine range, including the LR1, LR2 & LR1M. The assembly includes piston, ring set, gudgeon pin and cir-clips. Available in Standard size for the 76.2MM bore and in 0.020” & 0.040” oversized, select size required when ordering.

Lister LR piston ring sets, suitable for all LR1 and LR2 engines. These high quality non-genuine piston ring sets are equivalent to Lister part number 570-12120, /010, /020, /030 & /040. Available in standard to suit 3” bore & oversizes up to 0.040”. Select size required when ordering.

New genuine Lister LD, LR & SL Big End Bearings, available in STD and undersize. Please select size when ordering.

Lister Petter part number: 570-12180, 570-12180/020

High quality non-genuine Lister LD, LR & SL big end bearings, equivalent to 570-12180, available in STD and 0.010”, 0.020”, 0.030” & 0.040” undersize. Each bearing shell half is equivalent to 201-10040. Please select size when ordering.

Genuine Lister Petter LR & SR main bearing. Lister part number: 201-50060.

Main bearings to suit Lister Petter LR & SR engines, these high quality aftermarket bearings are available in Standard, and 010”, 020”, 030" & 040” undersize, select required size from the menu when ordering.

Centre bearings to suit Lister LR2, SR2 & SR3. Available in Standard and 010”, 020”, 030” & 040” undersize, select required size from the menu when ordering.

Pair of crankshaft thrust washers to fit all Lister Petter LD, SL, LR, SR, SW, LT and LV engines from one to three cylinders. There are 2 trust washers in each engine, this set contains 2, enough washers for 1 engine.

Equivalent to Lister Petter part number: 201-12380 x2

Lister Petter LD & LR small end bush, Lister part number 201-10150. Available in genuine and non-genuine equivalent.