Lister LT & LV
Genuine and non-genuine Lister LT1, LT2, LV1 & LV2 engine parts available here, if you are having trouble finding what you need please feel free to contact us. T
The Lister LT and LV engines are both air-cooled direct injection diesel engines that are currently still in production today.
Items:
1–48 of 110
Sort by:
Recommended
-
Lister Petter cold start reservoir and plunger for LD, SL, LR, ST, TS & TR engines. Available in genuine and non-genuine equivalent to P/N 201-26480.
-
Flywheel charging regulator to suit Lister Petter TS & TR, equivalent to part number 366-08144. This regulator fits TS and TR air cooled diesel engines fitted with Nicsa charging circuits only (See Notes).
-
A high quality non-Genuine Main bearing suitable for Lister Petter LT and LV engines, used on gear end, also used on flywheel end on engines up to numbers 4909LT131 (single cylinder) and 499LT2A31 (two cylinder). Undersizes are metric.
-
A high quality non-Genuine main bearing suitable for Lister Petter LT & LV engines, used on the Flywheel end from engine numbers 4910LT131 (single cylinder) and 500LT2A31 (two cylinder). Undersizes are metric.
-
A high quality non-Genuine big end/conrod bearing suitable for Lister Petter LT and LV diesel engines. Available in standard and undersize, select size required when ordering. Undersizes are metric.
-
Genuine Lister Petter LT2 and LV2 crankshaft centre bearing, available in standard and undersize, select size required when ordering. Undersizes are metric.
-
A high quality non-Genuine crankshaft centre bearing suitable for Lister Petter LT2 and LV2 diesel engine. Available in standard and undersize, select size required when ordering. Undersizes are metric.
-
A new rocker lever stub shaft suitable for Lister Petter LV & LT engines. Available in genuine and non-Genuine OEM equivalent. Lister Petter part number 601-30244.
-
Genuine valve spring carrier for Lister Petter LT1, LT2 LV1 & LV2, Lister Petter part number 601-30351.
-
Genuine Lister Petter temperature gauge with 6 foot capillary, suitable for a wide range of Lister Petter air cooled diesel engines, including ST, HR, TS, TR, TX, TL, LT & LV. Will also replace 370-12991 & 370-12992.
-
Genuine Lister Petter circuit breaker kit for the fuel control solenoid on Lister Petter TS, TR, LV, LPA & LPW. Includes the 12V circuit breaker, cables, washers, and label.
-
Injector washer suitable for Lister Petter LT & LV, equivalent to Lister Petter part number 601-39911.
Sold Individually.
-
Exhaust/Intake manifold joint suitable for Lister Petter LT & LV engines, this non-Genuine gasket is equivalent to Lister part number 601-30801, also replaces 601-30800.
-
Silencer to manifold joint suitable for Lister Petter LT1 engines, this Genuine gasket is equivalent to Lister Petter part number 601-33632.
-
Rocker cover joint suitable for Lister Petter LT & LV engines, this non-Genuine gasket is equivalent to Lister part number 601-30513, also replaces 601-30511.
-
Rocker cover joint suitable for early Lister Petter LT & LV engines, this non-Genuine gasket is equivalent to Lister part number 601-30510.
-
High quality injector nozzle suitable for Lister Petter LT1 diesel engines, builds 1 to 8 only. Please check your current nozzle number & type for suitability. Nozzle P1S4S675A, equivalent to Lister 601-30890.
-
High quality new old stock British made AE piston assembly to suit early Lister Petter LT1 engines, suitable for builds 1 to 8 only. Equivalent to Lister Petter 601-50190, available in STD, oversizes 0.50mm & 1.00mm, select required size when ordering (Oversizes are metric).
-
Genuine new old stock Lister fuel tank filler cap suitable for Lister LD, SL, LR, SR, ST, LT, LV, TS & TR engine mounted fuel tanks. This bayonet style filler cap is the later “non-spill” type, Lister part number 366-00091, comes complete with the 027-06151 joint.
-
Genuine Lister Petter LT cylinder head gasket, suitable for LT1 & LT2 air cooled diesel engines. Lister part number 601-30380.
Sold Individually
-
Genuine Lister Petter LT cylinder head shims, suitable for LT1 & LT2. Lister part numbers 601-30410 (0.076mm or 0.003”) & 601-30411 (0.254mm or 0.010”). These shims are available in 0.003” & 0.010” thick, select thickness required when ordering.
Sold Individually.
-
Genuine Lister Petter LT & LV cylinder base gasket, suitable for LT1, LT2, LV1 & LV2 air cooled diesel engines, Lister part number 601-30390.
Sold Individually
-
Genuine Lister Petter LV cylinder head gasket, suitable for LV1 & LV2 air cooled diesel engines. Lister part number 601-40540.
Sold Individually
-
Genuine Lister Petter LV cylinder head shims, suitable for LV1 & LV2. Lister part numbers 601-40550 (0.076mm or 0.003”) & 601-40551 (0.254mm or 0.010”). These shims are available in 0.003” & 0.010” thick, select thickness required when ordering.
Sold Individually.
-
Bottom rubber seal for the push rod tubes on Lister Petter LT & LV diesel engines, part number 601-30262, also replaces 601-30261.
Sold Individually.
-
Top rubber seal for the push rod tubes on Lister Petter LT & LV diesel engines, part number 601-30263.
Sold Individually.
-
Oil filler cap joint suitable for the oil filler caps fitted to Lister FR, LD, SL, HA, HB, LR, SR, ST, LT, LV, HR, HL, JA, JW, TX, TL, TS, TR. Equivalent to Lister Petter part number 303-00253.
-
Fuel filler cap joint suitable for fuel tank lids fitted to many Lister Petter fuel tanks, including LD, SL, LR, SR, ST and early LT, LV, TX, TL, TS & TR tanks fitted with the 366-00091 style filler cap. Equivalent to Lister Petter part number 027-06151.
-
Genuine push rod rubber seal for both the top and bottom of push rod tubes on early Lister LT1 diesel engines, part number 601-30260. Used with Push rod sealing tube 601 30280 on engines up to 2809728LT1.
Sold Individually.
-
Genuine Lister Petter inlet valve stem seal suitable for LT1, LT2, LV1 & LV2. Part number 601-41790.
-
Catch pin for starting handle on Lister Petter TS, TR, TL, LT & LV engines. This non-Genuine replacement part is equivalent to Lister Petter part number 201-43040, also replaces 601-39860.
-
Lister LT crank handle for clockwise rotation engines (Clockwise when Facing Flywheel). The handle fits 3/4” (19mm) shafts, engaging the (Gear End) camshaft/extension shaft starting dog when rotated in a clockwise (right-hand) rotation.
-
Genuine fuel pump ‘O’ Ring for Lister Petter LT, LV, TS, TR, TX, P600, LPA, LPW, LPWT & LPWS, this ‘O’ Ring is also used for the water pump seal on the LPW Range. Lister Petter part number 601-20691.
-
Genuine Lister Petter LT1 & LV1 dipstick (62), part number 027-07711. This is the later moulded nylon handle type used on engines made from early 1986 onwards (See Notes), not suitable for LT1 Build 30.
-
Flexible pipe for oil distribution block on Lister Petter TS, TR, TL, TX & LV, this high quality non-Genuine replacement pipe is equivalent to Lister Petter part number 366-07518, also replaces 366-07043 & 382-00933.
-
Early ‘Synchro’ type stator for Lister Petter LT & LV engines where fitted, genuine Lister new old stock. The 'Synchro' type charge windings were fitted to engines upto July 94. Lister part number 601-39900, Syncro Pt. NO. 21875.
-
New standard size cylinder and piston kit to suit Lister Petter LT1 & LT2 engines. The kit comprises of 1 x new standard size cylinder equivalent to P/N 601-30271 and 1 x new standard size piston assembly equivalent to Lister P/N 601-51145. Note: 2 sets required for LT2 engines.
-
New Lister Petter LT cylinder barrel, suitable for all LT1 & LT2 engines with an 82.55mm bore. These high quality non-genuine cylinders are equivalent to Lister Petter part number 601-30271.
-
European quality made non-Genuine piston assemblies to suit Lister Petter LT engines, suitable for LT1 Builds 9-30 and all LT2 engines. Equivalent to 601-51145 and replaces 601-51141
-
New Lister Petter LV cylinder barrel, suitable for all LV1 & LV2 engines with an 85.73mm bore. These high quality non-genuine cylinders are equivalent to Lister Petter part number 601-40102.
-
Top quality piston assemblies for the Lister Petter LV engine range. These are the later 3 ring type which replaces the earlier 4 ring pistons. Available in Standard size and 0.25mm, 0.50mm, 1.00mm oversize, select size when ordering.
-
Genuine Lister LT1 piston ring sets, available in standard or over size. Select size from dropdown menu below.
Lister Petter part numbers 601-50400, 601-50400/050, 601-50400/100, 601-50400/020, 601-50400/040.
-
Good quality non-genuine piston ring sets to suit Lister Petter LT1 & LT2 diesel engines, equivalent to Lister Petter part number 601-50400. Available in standard and oversize, oversizes are metric, select when ordering.
-
Only 1 left in stock
Genuine Lister Petter LV piston ring set part number 601-53630, these are 4 ring sets. Please check your piston before ordering, the 4 ring pistons were superseded with a 3 ring type in later engines and replacement piston sets.
-
Piston ring set to suit Lister Petter LV engines, equivalent to LP part number 601-54490, these are 3 ring sets, please check your piston before ordering, the 3 ring pistons superseded an earlier 4 ring type. Available in standard and oversize up to 1.00 (Oversizes are Metric).
-
Genuine Lister LT and LV big end bearing, available in standard and undersize, select size required when ordering. Undersizes are metric.
-
Genuine Lister LT and LV main bearing for gear end, also used on flywheel end on engines up to numbers 4909LT131 (single cylinder) and 499LT2A31 (two cylinder). Undersizes are metric.
-
Genuine Lister LT and LV main bearing for Flywheel end from engine numbers 4910LT131 (single cylinder) and 500LT2A31 (two cylinder). Undersizes are metric.
Items:
1–48 of 110