Lister TS, TL & TR
Genuine and non-genuine Lister TS1, TS2, TS3, TL2, TL3 & TR1, TR2, TR3 engine parts available here, if you are having trouble finding what you need please feel free to contact us.
The TS, TL and TR look remarkably similar and share many parts, however the TL & TR have a slightly larger bore and a longer stroke than the TS, which gives the them a slightly higher power output and more torque.
-
Oil pressure gauge, 0-6 Bar (0-100 PSI), suitable for Lister JP, CD, CE, LD, SL, HA, HB, LR, SR, SW, ST, STW, HR, HRW, TX, TS, TL & TR. These new high quality stainless steel gauges are a suitable replacement for Lister Petter part number 351-15160. Gauge face measures approximately 50mm or 2”, with a bottom fitting ¼” BSPP thread, Glycerine filled.
-
Governor end camshaft ball bearing for Lister Petter TS, TR, TL & TX diesel engines. This high quality OEM equivalent part fits all the single and multi-cylinder T range engines, replaces Lister Petter 201-30670.
-
New connecting rod complete with small end bush and bolts suitable for the Lister Petter TS, TR, & TL range of engines, fits all single and multi-cylinder engines in this range. Made to OEM quality standards, this part is equivalent to Lister Petter part number 570-30261.
-
Genuine Lister Petter new old stock TS, TR & TL fuel injection pumps, suitable for all single and multi-cylinder engines in the T series range mentioned. Replaces part numbers 201-31303, 201-31305, 201-48540 & FAOANO75E0730.
-
Swivel union plug used in several application for the fuel and oil lines on Lister Petter TS, TR, TL & TX engines. Equivalent to Lister Petter part number 202-34000.
-
Head temperature switch suitable for Lister Petter TS & TR engines running up to 1850 rpm, nominally open set at 150C and make contact on rise. Please refer to your engine’s manual for part suitability. This is a non-genuine part is equivalent to Lister Petter part number 382-09120.
-
A brass non-genuine adaptor/extension for cold start reservoirs on Lister Petter TS & TR air cooled diesel engines.
-
A fuel pump link assembly for linking between fuel pumps on 2 and 3 cylinder Lister Petter TS, TR, TL & TX diesel engines. This non-Genuine part is equivalent to Lister Petter part number 202-42070.
-
Fuel pump tappet & roller assembly suitable for Lister Petter TS, TR, TL & TX diesel engines, fits all single and multi-cylinder engines. Equivalent to Lister Petter part number 570-30770.
-
A high quality non-Genuine rocker leaver assembly suitable for Lister Petter TS, TL & TR diesel engines. The assembly is supplied complete with adjusting screw & nut and bush fitted & reamed ready for use.
-
Replacement fuel pipe for the connection between the fuel filter and fuel injector pump on Lister Petter TS1 & TR1 single cylinder diesel engines. This non-Genuine pipe is suited to the Agglomerator type filters.
-
Replacement fuel pipe for the connection between the fuel filter and fuel injector pumps on Lister Petter TS2 & TR2 diesel engines. This non-Genuine pipe is suited to the Agglomerator type filters, and also replaces the earlier pipe with a banjo fitting on the filter end.
-
Replacement fuel pipe for the connection between the fuel filter and fuel injector pumps on Lister Petter TS2 & TR2 diesel engines. This non-Genuine pipe is suited to the under tank type filters.
-
Replacement fuel pipe for the connection between the fuel filter and fuel injector pumps on Lister Petter TS3 & TR3 diesel engines. This non-Genuine pipe is suited to the Agglomerator type filters, and also replaces the earlier pipe with a banjo fitting on the filter end.
-
Replacement fuel pipe for the connection between the fuel filter and fuel injector pumps on Lister Petter TS3 & TR3 diesel engines. This non-Genuine pipe is suited to the under tank type filters.
-
Replacement fuel pipe for the connection between the fuel tank and fuel filter on Lister Petter TS & TR diesel engines fitted with engine mounted fuel tank and under tank type filters. This non-Genuine pipe replaces Lister Petter part number 201-46880.
-
Replacement fuel pipe for the connection between the fuel lift pump and fuel Agglomerator type fuel filter on Lister Petter TS3 & TR3 diesel engines. This non-Genuine pipe is suited to the Agglomerator type filters only.
-
Genuine Lister Petter temperature gauge with 6 foot capillary, suitable for a wide range of Lister Petter air cooled diesel engines, including ST, HR, TS, TR, TX, TL, LT & LV. Will also replace 370-12991 & 370-12992.
-
Genuine Lister Petter/Donaldson Pre-cleaner for 6-1/2" Front Mounted Heavy Duty Cyclonic Air Cleaners fitted to TS2, TS3 TR2 & TR3 air cooled diesel engines, part number 382-07900.
-
Genuine Lister Petter TS & TR cable loom for 12V electric start panel with the Nicsa charging system and with provision for two gauges in the panel.
-
Genuine Lister Petter inlet & exhaust manifold clamping washer for ST2, ST3, TS2, TS3, TR2 & TR3 were fitted. Also used as spacer washer on TS1 fuel filter bracket & 8.25 litre fuel tank mounting.
-
Genuine Lister Petter TS1 & TR1 Inlet manifold, part number 201-37852.
-
Genuine Lister Petter JE fuel control solenoid kit 570-31882, suitable for Lister Petter TS2, TS3, TR2, & TR3. The kit includes a 12V solenoid, lever, wiring cables, mounting bracket, labels, nuts & bolts.
-
Genuine Lister Petter piston ring assembly for TS Builds 41 & 60 to 66 noise reduction builds with a 3 ring piston. Currently available in 570-33470/025 & 570-33470/050 oversize.
-
Genuine Lister Petter air cowling suitable for TS1 & TR1 Builds 16-18, 101, part number 201-37832. Also replaces 201-37830.
-
Genuine Lister Petter TR & TL piston ring set 570-33370, suitable for 3 ring pistons, oversizes are metric.
-
Genuine Lister Petter swivel union plug for the T Range, including TS, TR, TL & TX. This union distributes oil to the oil distribution block or oil gauge where they need to be fitted. Shown in the second image as item number 1.
-
Genuine Lister Petter TS, TR, TL & TX oil filler cap, part number 366-08126, also replaces 027-03824 & 366-00091.
-
Injector washer suitable for Lister Petter ST, HR, TS, TR & TL, equivalent to Lister part number 351-40230.
Sold Individually.
-
Exhaust/Intake manifold joint suitable for Lister TS, TR & TL engines, this non-Genuine gasket is equivalent to Lister part number 201-33420.
-
Injector leak off kit suitable for Lister Petter T Series 3 cylinder engines including TS3, TL3 & TR3. The kit includes 1 meter of high quality cotton over braided rubber fuel line and new brass connection fittings.
-
Injector leak off kit suitable for Lister Petter T Series 2 cylinder engines including TS2, TL2 & TR2. The kit includes 1 meter of high quality cotton over braided rubber fuel line and new brass connection fittings.
-
Leak off pipe rubber boot for sealing off last tee piece on Lister Petter T Series engine, including the TS, TL, TX & TR. Equivalent to Lister Petter part number 202-41270.
-
Replacement fuel pipe for the connection between the fuel tank and fuel filter on Lister Petter TS1 & TR1 diesel engines (Early Type). This non-Genuine pipe replaces Lister Petter part number 366-07044.
-
Inlet & Exhaust manifold suitable for Lister Petter TS1 & TR1 diesel engines. This combined intake and exhaust cast iron manifold can also be used to replace the 2 piece manifolds when an alternative muffler is used. Exhaust thread is 1-1/4” BSP.
-
Air temperature switch suitable for Lister Petter TS, TR, TL & TX, equivalent to Lister Petter part number 202-45310, also replaces 202-36660. Please refer to image 2 (Item 4) showing this type of switch in use. This is the replacement switch only, Does NOT include bracket or moulded seal.
-
Oil distribution block assembly suitable for Lister Petter TS, TR, TL & TX. The assembly includes the distribution block, 1 x union, 1 x plug and 2 x copper washers.
-
Genuine new old stock Lister fuel tank filler cap suitable for Lister LD, SL, LR, SR, ST, LT, LV, TS & TR engine mounted fuel tanks. This bayonet style filler cap is the later “non-spill” type, Lister part number 366-00091, comes complete with the 027-06151 joint.
-
Valve spring suitable for Lister Petter TS, TL & TR diesel engines, part number 201-30080. Available in Genuine and non-Genuine equivalent.
Sold Individually
-
Genuine Lister Petter inlet manifold suitable for TS1 & TR1 where an oil bath air filter is required. Lister Petter part number 201-37860, will also replace 201-37861.
-
Genuine Lister Petter oil filler neck 027-06317, used on many Lister engines including LD, SL, LR, SR, HA, HB, HW, ST, STW, HR, HRW, TS, TL & TR. Supersedes 027-03821 & 27-3821.
-
Flywheel fan cap screw (M8 x 30mm) for Lister Petter TS & TR, this non-Genuine part is equivalent to Lister Petter part number 272-00176.
Sold Individually
-
Spring Washer used on many Lister Petter models, including TS, TR, LPA, LPW, JA & JW, this non-Genuine part is equivalent to Lister Petter part number 272-00089.
Sold Individually
-
Genuine Lister Petter drive member 202-35360 for hydraulic pump adaptor. Please check your current part number if replacing old unit, this 202-35360 may not be compatible with later couplings using the 202-35361 drive member.
-
Genuine Lister Petter TS, TR & TL cylinder base joint/gasket (copper), fits TS1, TS2, TS3, TR1, TR2, TR3, TL2 & TL3 engines, part number 201-32430.
Sold Individually
-
Genuine Lister Petter ST & TS cylinder head gasket, suitable for ST1, ST2, ST3, TS1, TS2 & TS3 air cooled diesel engines. Lister part number 201-80210.
-
Genuine Lister ST & TS cylinder head shims, suitable for ST1, ST2, ST3, TS1, TS2 & TS3. Lister part numbers 201-80220 (0.076mm or 0.003”) & 201-80221 (0.254mm or 0.010”). These shims are available in 0.003” & 0.010” thick, select thickness required when ordering.
Sold Individually.
-
Top rubber cup for the push rod tubes on Lister Petter TS, TR, TL & TX diesel engines, part number 201-30260.
Sold Individually.